Filters
Allstar Performance offers a wide selection of mild steel chassis tabs and brackets that are available for various diameters of round tubing, square tubing, and flat plates to suit your specific needs. Allstar Performance chassis tabs allow you to easily mount or install accessories on your chassis or suspension, while helping you save you time during car construction or repair.
( 82 )
$6.99
—
$13.99
Competition Engineering offers these Magnum series 4-link brackets to enable you to replace bent or damaged brackets when updating your rear-end housing. Designed for use on 3 in. diameter axle tubes, these brackets feature a radiused profile that simplifies welding and saves hours of fabrication time. The rugged steel construction eliminates bending in ultra high-horsepower cars, and the entire profile is stamped from hot rolled steel in one operation, to eliminate distortion and ensure exact dimensions.
Not Yet Reviewed
$49.99
Competition Engineering offers several different types of brackets and tabs to help make it easier for you to mount and install accessories to your chassis. These brackets and tabs enable you to replace bent and damaged brackets, or update your chassis setup.
( 19 )
$31.99
—
$55.99
Rhodes Race Cars Sportsman Series 4-link brackets are available in styles for chassis and rear-end housing fabrication projects. Crafted from 1/4 in. thick mild steel, the welding tabs feature 5/8 in. holes for rod ends. And the housing brackets fit 3 in. axle tubes (unless otherwise noted), with integrated shock and wheelie bar mounts. Order the set best suited for your application.
Not Yet Reviewed
$99.95
Mount your lower control arms using heavy-duty replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for strength and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower control arm brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the style needed to mount front or rear control arms on your specific vehicle.
( 13 )
$76.99
—
$168.29
Artec Industries inner C gussets are designed to take serious abuse while reinforcing your front inner C's. They're precision-machined from 1/4 in. thick steel and pre-formed to fit. The heavy-duty design of these gussets provides valuable stability to areas prone to flex during high abuse conditions. Order the brackets recommended for your specific application.
( 6 )
$93.49
—
$102.29
PSC mounting tabs support your cylinder assist. These weld-on angled steel brackets offer the strength you require and want for your project. Whether you need to add/replace one or four, PSC mounting tabs are available to secure your cylinder.
Not Yet Reviewed
$2.99
Summit Racing™ offers chassis tabs in a variety of shapes, thicknesses, and configurations. These mild steel brackets are handy welding components when you need to mount accessories to round or square tubing and flat plates. They're ideal for chassis and suspension work.
( 1 )
$11.99
Rhodes Race Cars offers Elite Series chassis brackets in a variety of styles, made from 1/4 in. or 1/8 in. 4130 chromoly steel. These welding components are ideal to facilitate automotive fabrication projects.
Not Yet Reviewed
$199.95
Artec Industries upper truss link mounts are designed to mount on a flat surface. They're precision CNC-cut and bent from 1/4 in. thick mild steel. The bend strengthens each bracket so that no additional reinforcement is needed. Artec upper truss link mounts are available in different widths to accommodate the most common joints. Hole size comes standard at 9/16 in., but can be drilled out to up 1 in., if necessary.
( 1 )
$23.49
—
$46.99
Keyser Manufacturing chassis/utility tabs create strong mounting points for your project. The tabs come in thicknesses from 1/16 in. up to 3/8 in. for heavy-duty jobs, as well as in lengths and hole sizes to meet your needs. Buy one, or buy a hundred and save. Fabricate with chassis/utility tabs from Keyser.
( 3 )
$3.99
—
$12.99
Artec Industries dual 3-link brackets offer flexibility and adjustability in one place. They consist of a frame gusset and an upper control arm mount that can be used on either driver or passenger side; simply flip the versatile brackets around. No other combo 3-link brackets give you the option to choose which side your upper control arm is on. These Artec brackets come unwelded—however, the pre-jigged keys and slots make assembly and fixturing simple. The units are made from 1/4 in. thick boxed steel, with a skid plate bottom wrapping around them to protect the joint area from direct impact.
Not Yet Reviewed
$239.99
Beef up the rear of your Jeep with axle swap kits from M.O.R.E.--Mountain Off-Road. The Ford 8.8 axle swap offers a better upgrade over the Dana 35 with almost the same width as your Jeep and the same lug pattern, so you can hang on to your stock wheels. So, after you hit the salvage yard for your Explorer rear axle assembly, get your quality-made axle swap kit from M.O.R.E. These kits include unpainted components needed for your swap from U-bolts and mount to brackets and spring seats, depending on your application. Are you replacing your rear axle? Install with axle swap kits from M.O.R.E.
( 5 )
$137.54
—
$476.62
Mount your lower link arm to the frame using these strong replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for durability and include grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower link frame brackets to be mounted at an angle without excess material hanging off the side. Not only do these brackets look better and more natural to the frame, but they also ensure less bracket sliding on the rocks and getting in the way.
( 4 )
$49.99
—
$76.99
Make secure automotive mounts using these convenient Artec Industries general purpose tabs. They're precision-cut from 1/4 in. thick steel and feature a bolt hole for secure attachment and a variety of uses. The welding tabs are available in different heights, shapes, and hole sizes to accommodate your specific project.
Not Yet Reviewed
$13.74
—
$19.24
Keyser Manufacturing offers several styles of gussets to help with your car build. They have gussets with one hole, three holes, and no holes; they have 90 degree corner gussets, mini gussets, and saddle gussets in thicknesses, sizes, and quantities to suit your needs, your project, and your wallet. Let Keyser help you complete your race car build with their selection of steel gussets.
( 4 )
$1.99
—
$2.99
Artec Industries large 4-link crossmember brackets allow for triangulated lower links that meet at a 1.75 in. O.D. round tube or 2.00 in. square tube crossmember between frame rails (depending on model). They're made for use with large joints that have a 2.625 in. mounting width. The hole size is 9/16 in., but can be drilled for larger sizes. Angles are set at 22 degrees each (44 degrees total) to allow use with Artec's angled lower link axle brackets. These large 4-link crossmember brackets are made from 1/4 in. thick steel and come in six unwelded pieces that jig together for easy assembly.
( 1 )
$114.99
Rhodes Race Cars offers a wide selection of chassis tabs and welding brackets that are available in multiple configurations to suit your specific needs. These flange connections give you mounting points to easily install accessories on your chassis or suspension, saving you time during car construction.
Not Yet Reviewed
$3.99
—
$4.99
Allstar Performance trailing arm brackets are a solid steel construction. They allow you to set the trailing arm angles to help your car turn through the center and are available in assorted styles. The single steel brackets can be used as front mounts for leaf springs or trailing arms.
( 1 )
$27.49
Mount your lower link arm to the axle using these strong replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for durability and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower link axle brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the degree of offset needed for best fitment on your specific vehicle.
( 1 )
$54.99
—
$85.99
Trail-Gear customers tend to drive where the majority would never venture—climbing over rocks, hills, and rugged off-road terrain. Hobbies like that require occasional maintenance to the chassis and suspension. For those repairs or rebuilds, Trail-Gear axle housing upper link mount brackets provide secure attachment points. These brackets are formed and welded from silver powdercoated 1/4 in. steel for long-lasting strength. They're available for a variety of axle setups, including OEM and Rock Assault. Match your vehicle to the correct hardware application.
Not Yet Reviewed
$235.83
Artec Industries tube link mounts are designed to mount your control arms to lower links or any other tubing. They're perfect for making your own radius arms or other smaller size links. The durable brackets are constructed from 1/4 in. thick boxed steel for high strength, and their tapered design provides a smooth transition from the mounts to the tubing. These mounts are available in universal and application-specific models.
Not Yet Reviewed
$34.99
—
$54.99
Moser 4-link brackets are designed for use on 3 in. diameter axle tubes. Their rugged construction eliminates bending in ultra high-horsepower cars. Moser 4-link brackets are available in mild or chromoly steel for your rear-end housing.
Not Yet Reviewed
$162.00
—
$314.00
Order a set of Rhodes Race Cars Pro Series 4-link brackets to assist with your chassis and suspension project. The 1/4 in. thick mild steel welding tabs are designed to work with 3 in. axle tubes, unless otherwise noted. Pro Series 4-link housing brackets feature 5/8 holes for rod ends, and come in a set of four.
Not Yet Reviewed
$124.95
Modal Header
Truck / SUV
Jeep®
Gifts, Clothing, & More
Restoration
Stock Replacement
Late Model Muscle
Tools
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
