-
Detection, sky localization and early warning for binary neutron star mergers by detectors located in China of different configurations in third generation detector network
Authors:
Yufeng Li,
Ik Siong Heng,
Man Leong Chan,
Xilong Fan,
Lijun Gou
Abstract:
This work shows the results of an evaluation of the impact that a detector located in China, with a noise budget comparable to that of a proposed high-frequency detector with a 20 km arm length, an Einstein Telescope (ET) or a Cosmic Explorer (CE), could have on the network of ET-CE in terms of detection rate, localization, and providing early warning alert for simulated binary neutron star (BNS)s…
▽ More
This work shows the results of an evaluation of the impact that a detector located in China, with a noise budget comparable to that of a proposed high-frequency detector with a 20 km arm length, an Einstein Telescope (ET) or a Cosmic Explorer (CE), could have on the network of ET-CE in terms of detection rate, localization, and providing early warning alert for simulated binary neutron star (BNS)s. The results indicate that a three-detector network including a Chinese detector could identify at least 4.4% more BNS mergers than an ET-CE network alone. The localization uncertainty could be reduced by a factor of more than 5 on average compared to the ET-CE network. With a three-detector network involving a Chinese detector, up to 89% of BNS mergers could be located within 10 square degrees of the sky 10 minutes prior to the merger. The assessment suggests that the potential for early warning signals is highest when the Chinese detector is similar to ET, whereas the sources are detected with the highest signal-to-noise ratio and localized to the smallest regions when the detector is more akin to CE. Interestingly, the C20N network (comprising ET+CE+C20) can achieve comparable localization performance as the ET network while outperforming the ETCN network (featuring the ET+CE+ an ET-like detector in China) in terms of detection capabilities, especially at large distances, indicating that adding a 20 km kilohertz detector in China to ET-CE network would make significant contributions at least as adding an ET-like detector in China to multi-messenger astronomy for almost all BNS observations.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
InFiConD: Interactive No-code Fine-tuning with Concept-based Knowledge Distillation
Authors:
Jinbin Huang,
Wenbin He,
Liang Gou,
Liu Ren,
Chris Bryan
Abstract:
The emergence of large-scale pre-trained models has heightened their application in various downstream tasks, yet deployment is a challenge in environments with limited computational resources. Knowledge distillation has emerged as a solution in such scenarios, whereby knowledge from large teacher models is transferred into smaller student' models, but this is a non-trivial process that traditiona…
▽ More
The emergence of large-scale pre-trained models has heightened their application in various downstream tasks, yet deployment is a challenge in environments with limited computational resources. Knowledge distillation has emerged as a solution in such scenarios, whereby knowledge from large teacher models is transferred into smaller student' models, but this is a non-trivial process that traditionally requires technical expertise in AI/ML. To address these challenges, this paper presents InFiConD, a novel framework that leverages visual concepts to implement the knowledge distillation process and enable subsequent no-code fine-tuning of student models. We develop a novel knowledge distillation pipeline based on extracting text-aligned visual concepts from a concept corpus using multimodal models, and construct highly interpretable linear student models based on visual concepts that mimic a teacher model in a response-based manner. InFiConD's interface allows users to interactively fine-tune the student model by manipulating concept influences directly in the user interface. We validate InFiConD via a robust usage scenario and user study. Our findings indicate that InFiConD's human-in-the-loop and visualization-driven approach enables users to effectively create and analyze student models, understand how knowledge is transferred, and efficiently perform fine-tuning operations. We discuss how this work highlights the potential of interactive and visual methods in making knowledge distillation and subsequent no-code fine-tuning more accessible and adaptable to a wider range of users with domain-specific demands.
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
Measuring the Spin of Black Hole Transient 4U 1543-47 Using Insight-HXMT
Authors:
Jun Yang,
Nan Jia,
Erlin Qiao,
Yujia Song,
Lijun Gou
Abstract:
We provided a comprehensive study of the properties of the black hole in the low-mass X-ray binary system 4U 1543-47, specifically focusing on the 2021 outburst (MJD 59380-59470). Using observations from the \textit{Insight}-HXMT mission, we employed X-ray reflection fitting method and analyzed spectral data to estimate key black hole parameters. Through our investigation redbased on 6 out of the…
▽ More
We provided a comprehensive study of the properties of the black hole in the low-mass X-ray binary system 4U 1543-47, specifically focusing on the 2021 outburst (MJD 59380-59470). Using observations from the \textit{Insight}-HXMT mission, we employed X-ray reflection fitting method and analyzed spectral data to estimate key black hole parameters. Through our investigation redbased on 6 out of the 52 available observations, we estimated the spin parameter of the black hole to be $0.902_{-0.053}^{+0.054}$ and the inclination angle of the accretion disk to be $28.91_{-1.24}^{+1.82}$ degrees (90\% confidence limits, statistical only), then we discussed the influence of high luminosity. Based on the \texttt{relxill} series models are not suitable for thick disk scenario, and in comparison with findings from other studies, we propose that our estimation of the spin value may be exaggerated.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
USE: Universal Segment Embeddings for Open-Vocabulary Image Segmentation
Authors:
Xiaoqi Wang,
Wenbin He,
Xiwei Xuan,
Clint Sebastian,
Jorge Piazentin Ono,
Xin Li,
Sima Behpour,
Thang Doan,
Liang Gou,
Han Wei Shen,
Liu Ren
Abstract:
The open-vocabulary image segmentation task involves partitioning images into semantically meaningful segments and classifying them with flexible text-defined categories. The recent vision-based foundation models such as the Segment Anything Model (SAM) have shown superior performance in generating class-agnostic image segments. The main challenge in open-vocabulary image segmentation now lies in…
▽ More
The open-vocabulary image segmentation task involves partitioning images into semantically meaningful segments and classifying them with flexible text-defined categories. The recent vision-based foundation models such as the Segment Anything Model (SAM) have shown superior performance in generating class-agnostic image segments. The main challenge in open-vocabulary image segmentation now lies in accurately classifying these segments into text-defined categories. In this paper, we introduce the Universal Segment Embedding (USE) framework to address this challenge. This framework is comprised of two key components: 1) a data pipeline designed to efficiently curate a large amount of segment-text pairs at various granularities, and 2) a universal segment embedding model that enables precise segment classification into a vast range of text-defined categories. The USE model can not only help open-vocabulary image segmentation but also facilitate other downstream tasks (e.g., querying and ranking). Through comprehensive experimental studies on semantic segmentation and part segmentation benchmarks, we demonstrate that the USE framework outperforms state-of-the-art open-vocabulary segmentation methods.
△ Less
Submitted 7 June, 2024;
originally announced June 2024.
-
Investigating Interaction Modes and User Agency in Human-LLM Collaboration for Domain-Specific Data Analysis
Authors:
Jiajing Guo,
Vikram Mohanty,
Jorge Piazentin Ono,
Hongtao Hao,
Liang Gou,
Liu Ren
Abstract:
Despite demonstrating robust capabilities in performing tasks related to general-domain data-operation tasks, Large Language Models (LLMs) may exhibit shortcomings when applied to domain-specific tasks. We consider the design of domain-specific AI-powered data analysis tools from two dimensions: interaction and user agency. We implemented two design probes that fall on the two ends of the two dime…
▽ More
Despite demonstrating robust capabilities in performing tasks related to general-domain data-operation tasks, Large Language Models (LLMs) may exhibit shortcomings when applied to domain-specific tasks. We consider the design of domain-specific AI-powered data analysis tools from two dimensions: interaction and user agency. We implemented two design probes that fall on the two ends of the two dimensions: an open-ended high agency (OHA) prototype and a structured low agency (SLA) prototype. We conducted an interview study with nine data scientists to investigate (1) how users perceived the LLM outputs for data analysis assistance, and (2) how the two test design probes, OHA and SLA, affected user behavior, performance, and perceptions. Our study revealed insights regarding participants' interactions with LLMs, how they perceived the results, and their desire for explainability concerning LLM outputs, along with a noted need for collaboration with other users, and how they envisioned the utility of LLMs in their workflow.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Self-Supervised Video Desmoking for Laparoscopic Surgery
Authors:
Renlong Wu,
Zhilu Zhang,
Shuohao Zhang,
Longfei Gou,
Haobin Chen,
Lei Zhang,
Hao Chen,
Wangmeng Zuo
Abstract:
Due to the difficulty of collecting real paired data, most existing desmoking methods train the models by synthesizing smoke, generalizing poorly to real surgical scenarios. Although a few works have explored single-image real-world desmoking in unpaired learning manners, they still encounter challenges in handling dense smoke. In this work, we address these issues together by introducing the self…
▽ More
Due to the difficulty of collecting real paired data, most existing desmoking methods train the models by synthesizing smoke, generalizing poorly to real surgical scenarios. Although a few works have explored single-image real-world desmoking in unpaired learning manners, they still encounter challenges in handling dense smoke. In this work, we address these issues together by introducing the self-supervised surgery video desmoking (SelfSVD). On the one hand, we observe that the frame captured before the activation of high-energy devices is generally clear (named pre-smoke frame, PS frame), thus it can serve as supervision for other smoky frames, making real-world self-supervised video desmoking practically feasible. On the other hand, in order to enhance the desmoking performance, we further feed the valuable information from PS frame into models, where a masking strategy and a regularization term are presented to avoid trivial solutions. In addition, we construct a real surgery video dataset for desmoking, which covers a variety of smoky scenes. Extensive experiments on the dataset show that our SelfSVD can remove smoke more effectively and efficiently while recovering more photo-realistic details than the state-of-the-art methods. The dataset, codes, and pre-trained models are available at \url{https://github.com/ZcsrenlongZ/SelfSVD}.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
A streamlined Approach to Multimodal Few-Shot Class Incremental Learning for Fine-Grained Datasets
Authors:
Thang Doan,
Sima Behpour,
Xin Li,
Wenbin He,
Liang Gou,
Liu Ren
Abstract:
Few-shot Class-Incremental Learning (FSCIL) poses the challenge of retaining prior knowledge while learning from limited new data streams, all without overfitting. The rise of Vision-Language models (VLMs) has unlocked numerous applications, leveraging their existing knowledge to fine-tune on custom data. However, training the whole model is computationally prohibitive, and VLMs while being versat…
▽ More
Few-shot Class-Incremental Learning (FSCIL) poses the challenge of retaining prior knowledge while learning from limited new data streams, all without overfitting. The rise of Vision-Language models (VLMs) has unlocked numerous applications, leveraging their existing knowledge to fine-tune on custom data. However, training the whole model is computationally prohibitive, and VLMs while being versatile in general domains still struggle with fine-grained datasets crucial for many applications. We tackle these challenges with two proposed simple modules. The first, Session-Specific Prompts (SSP), enhances the separability of image-text embeddings across sessions. The second, Hyperbolic distance, compresses representations of image-text pairs within the same class while expanding those from different classes, leading to better representations. Experimental results demonstrate an average 10-point increase compared to baselines while requiring at least 8 times fewer trainable parameters. This improvement is further underscored on our three newly introduced fine-grained datasets.
△ Less
Submitted 10 March, 2024;
originally announced March 2024.
-
AttributionScanner: A Visual Analytics System for Model Validation with Metadata-Free Slice Finding
Authors:
Xiwei Xuan,
Jorge Piazentin Ono,
Liang Gou,
Kwan-Liu Ma,
Liu Ren
Abstract:
Data slice finding is an emerging technique for validating machine learning (ML) models by identifying and analyzing subgroups in a dataset that exhibit poor performance, often characterized by distinct feature sets or descriptive metadata. However, in the context of validating vision models involving unstructured image data, this approach faces significant challenges, including the laborious and…
▽ More
Data slice finding is an emerging technique for validating machine learning (ML) models by identifying and analyzing subgroups in a dataset that exhibit poor performance, often characterized by distinct feature sets or descriptive metadata. However, in the context of validating vision models involving unstructured image data, this approach faces significant challenges, including the laborious and costly requirement for additional metadata and the complex task of interpreting the root causes of underperformance. To address these challenges, we introduce AttributionScanner, an innovative human-in-the-loop Visual Analytics (VA) system, designed for metadata-free data slice finding. Our system identifies interpretable data slices that involve common model behaviors and visualizes these patterns through an Attribution Mosaic design. Our interactive interface provides straightforward guidance for users to detect, interpret, and annotate predominant model issues, such as spurious correlations (model biases) and mislabeled data, with minimal effort. Additionally, it employs a cutting-edge model regularization technique to mitigate the detected issues and enhance the model's performance. The efficacy of AttributionScanner is demonstrated through use cases involving two benchmark datasets, with qualitative and quantitative evaluations showcasing its substantial effectiveness in vision model validation, ultimately leading to more reliable and accurate models.
△ Less
Submitted 4 May, 2024; v1 submitted 12 January, 2024;
originally announced January 2024.
-
Domain adaption and physical constrains transfer learning for shale gas production
Authors:
Zhaozhong Yang,
Liangjie Gou,
Chao Min,
Duo Yi,
Xiaogang Li,
Guoquan Wen
Abstract:
Effective prediction of shale gas production is crucial for strategic reservoir development. However, in new shale gas blocks, two main challenges are encountered: (1) the occurrence of negative transfer due to insufficient data, and (2) the limited interpretability of deep learning (DL) models. To tackle these problems, we propose a novel transfer learning methodology that utilizes domain adaptat…
▽ More
Effective prediction of shale gas production is crucial for strategic reservoir development. However, in new shale gas blocks, two main challenges are encountered: (1) the occurrence of negative transfer due to insufficient data, and (2) the limited interpretability of deep learning (DL) models. To tackle these problems, we propose a novel transfer learning methodology that utilizes domain adaptation and physical constraints. This methodology effectively employs historical data from the source domain to reduce negative transfer from the data distribution perspective, while also using physical constraints to build a robust and reliable prediction model that integrates various types of data. The methodology starts by dividing the production data from the source domain into multiple subdomains, thereby enhancing data diversity. It then uses Maximum Mean Discrepancy (MMD) and global average distance measures to decide on the feasibility of transfer. Through domain adaptation, we integrate all transferable knowledge, resulting in a more comprehensive target model. Lastly, by incorporating drilling, completion, and geological data as physical constraints, we develop a hybrid model. This model, a combination of a multi-layer perceptron (MLP) and a Transformer (Transformer-MLP), is designed to maximize interpretability. Experimental validation in China's southwestern region confirms the method's effectiveness.
△ Less
Submitted 17 December, 2023;
originally announced December 2023.
-
InterVLS: Interactive Model Understanding and Improvement with Vision-Language Surrogates
Authors:
Jinbin Huang,
Wenbin He,
Liang Gou,
Liu Ren,
Chris Bryan
Abstract:
Deep learning models are widely used in critical applications, highlighting the need for pre-deployment model understanding and improvement. Visual concept-based methods, while increasingly used for this purpose, face challenges: (1) most concepts lack interpretability, (2) existing methods require model knowledge, often unavailable at run time. Additionally, (3) there lacks a no-code method for p…
▽ More
Deep learning models are widely used in critical applications, highlighting the need for pre-deployment model understanding and improvement. Visual concept-based methods, while increasingly used for this purpose, face challenges: (1) most concepts lack interpretability, (2) existing methods require model knowledge, often unavailable at run time. Additionally, (3) there lacks a no-code method for post-understanding model improvement. Addressing these, we present InterVLS. The system facilitates model understanding by discovering text-aligned concepts, measuring their influence with model-agnostic linear surrogates. Employing visual analytics, InterVLS offers concept-based explanations and performance insights. It enables users to adjust concept influences to update a model, facilitating no-code model improvement. We evaluate InterVLS in a user study, illustrating its functionality with two scenarios. Results indicates that InterVLS is effective to help users identify influential concepts to a model, gain insights and adjust concept influence to improve the model. We conclude with a discussion based on our study results.
△ Less
Submitted 25 June, 2024; v1 submitted 6 November, 2023;
originally announced November 2023.
-
The spin measurement of MAXI J1348-630 using the Insight-HXMT data
Authors:
Yujia Song,
Nan Jia,
Jun Yang,
Ye Feng,
Lijun Gou,
Tianhua Lu
Abstract:
We report the results of fitting Insight-HXMT data to the black hole X-ray binary MAXI J1348-430, which was discovered on January 26th, 2019, with the Gas Slit Camera (GSC) on-board MAXI. Several observations at the beginning of the first burst were selected, with a total of 10 spectra. From the residuals of fits using disk plus power law models, X-ray reflection signatures were clearly visible in…
▽ More
We report the results of fitting Insight-HXMT data to the black hole X-ray binary MAXI J1348-430, which was discovered on January 26th, 2019, with the Gas Slit Camera (GSC) on-board MAXI. Several observations at the beginning of the first burst were selected, with a total of 10 spectra. From the residuals of fits using disk plus power law models, X-ray reflection signatures were clearly visible in some of these observations. We use the state-of the-art relxill series reflection model to fit six spectra with distinct reflection signatures and a joint fit to these spectra. In particular, we focus on the results for the black hole spin values. Assuming Rin = RISCO, the spin parameter is constrained to be 0.82+0.04-0.03 with 90% confidence level (statistical only).
△ Less
Submitted 24 October, 2023; v1 submitted 11 September, 2023;
originally announced September 2023.
-
GradOrth: A Simple yet Efficient Out-of-Distribution Detection with Orthogonal Projection of Gradients
Authors:
Sima Behpour,
Thang Doan,
Xin Li,
Wenbin He,
Liang Gou,
Liu Ren
Abstract:
Detecting out-of-distribution (OOD) data is crucial for ensuring the safe deployment of machine learning models in real-world applications. However, existing OOD detection approaches primarily rely on the feature maps or the full gradient space information to derive OOD scores neglecting the role of most important parameters of the pre-trained network over in-distribution (ID) data. In this study,…
▽ More
Detecting out-of-distribution (OOD) data is crucial for ensuring the safe deployment of machine learning models in real-world applications. However, existing OOD detection approaches primarily rely on the feature maps or the full gradient space information to derive OOD scores neglecting the role of most important parameters of the pre-trained network over in-distribution (ID) data. In this study, we propose a novel approach called GradOrth to facilitate OOD detection based on one intriguing observation that the important features to identify OOD data lie in the lower-rank subspace of in-distribution (ID) data. In particular, we identify OOD data by computing the norm of gradient projection on the subspaces considered important for the in-distribution data. A large orthogonal projection value (i.e. a small projection value) indicates the sample as OOD as it captures a weak correlation of the ID data. This simple yet effective method exhibits outstanding performance, showcasing a notable reduction in the average false positive rate at a 95% true positive rate (FPR95) of up to 8% when compared to the current state-of-the-art methods.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
UP-DP: Unsupervised Prompt Learning for Data Pre-Selection with Vision-Language Models
Authors:
Xin Li,
Sima Behpour,
Thang Doan,
Wenbin He,
Liang Gou,
Liu Ren
Abstract:
In this study, we investigate the task of data pre-selection, which aims to select instances for labeling from an unlabeled dataset through a single pass, thereby optimizing performance for undefined downstream tasks with a limited annotation budget. Previous approaches to data pre-selection relied solely on visual features extracted from foundation models, such as CLIP and BLIP-2, but largely ign…
▽ More
In this study, we investigate the task of data pre-selection, which aims to select instances for labeling from an unlabeled dataset through a single pass, thereby optimizing performance for undefined downstream tasks with a limited annotation budget. Previous approaches to data pre-selection relied solely on visual features extracted from foundation models, such as CLIP and BLIP-2, but largely ignored the powerfulness of text features. In this work, we argue that, with proper design, the joint feature space of both vision and text can yield a better representation for data pre-selection. To this end, we introduce UP-DP, a simple yet effective unsupervised prompt learning approach that adapts vision-language models, like BLIP-2, for data pre-selection. Specifically, with the BLIP-2 parameters frozen, we train text prompts to extract the joint features with improved representation, ensuring a diverse cluster structure that covers the entire dataset. We extensively compare our method with the state-of-the-art using seven benchmark datasets in different settings, achieving up to a performance gain of 20%. Interestingly, the prompts learned from one dataset demonstrate significant generalizability and can be applied directly to enhance the feature extraction of BLIP-2 from other datasets. To the best of our knowledge, UP-DP is the first work to incorporate unsupervised prompt learning in a vision-language model for data pre-selection.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
Hyp-OW: Exploiting Hierarchical Structure Learning with Hyperbolic Distance Enhances Open World Object Detection
Authors:
Thang Doan,
Xin Li,
Sima Behpour,
Wenbin He,
Liang Gou,
Liu Ren
Abstract:
Open World Object Detection (OWOD) is a challenging and realistic task that extends beyond the scope of standard Object Detection task. It involves detecting both known and unknown objects while integrating learned knowledge for future tasks. However, the level of "unknownness" varies significantly depending on the context. For example, a tree is typically considered part of the background in a se…
▽ More
Open World Object Detection (OWOD) is a challenging and realistic task that extends beyond the scope of standard Object Detection task. It involves detecting both known and unknown objects while integrating learned knowledge for future tasks. However, the level of "unknownness" varies significantly depending on the context. For example, a tree is typically considered part of the background in a self-driving scene, but it may be significant in a household context. We argue that this contextual information should already be embedded within the known classes. In other words, there should be a semantic or latent structure relationship between the known and unknown items to be discovered. Motivated by this observation, we propose Hyp-OW, a method that learns and models hierarchical representation of known items through a SuperClass Regularizer. Leveraging this representation allows us to effectively detect unknown objects using a similarity distance-based relabeling module. Extensive experiments on benchmark datasets demonstrate the effectiveness of Hyp-OW, achieving improvement in both known and unknown detection (up to 6 percent). These findings are particularly pronounced in our newly designed benchmark, where a strong hierarchical structure exists between known and unknown objects. Our code can be found at https://github.com/boschresearch/Hyp-OW
△ Less
Submitted 15 February, 2024; v1 submitted 25 June, 2023;
originally announced June 2023.
-
The spin measurement of MAXI J0637-430: a black hole candidate with high disk density
Authors:
Nan Jia,
Ye Feng,
Yujia Song,
Jun Yang,
Jieun Yuh,
Peijun Huang,
Lijun Gou
Abstract:
The Galactic black hole candidate MAXI J0637-430 was first discovered by $\textit{MAXI/GSC}$ on 2019 November 02. We study the spectral properties of MAXI J0637-430 by using the archived $\textit{NuSTAR}$ data and $\textit{Swift}$/XRT data. After fitting the eight spectra by using a disk component and a powerlaw component model with absorption, we select the spectra with relatively strong reflecti…
▽ More
The Galactic black hole candidate MAXI J0637-430 was first discovered by $\textit{MAXI/GSC}$ on 2019 November 02. We study the spectral properties of MAXI J0637-430 by using the archived $\textit{NuSTAR}$ data and $\textit{Swift}$/XRT data. After fitting the eight spectra by using a disk component and a powerlaw component model with absorption, we select the spectra with relatively strong reflection components for detailed X-ray reflection spectroscopy. Using the most state-of-art reflection model $\tt{relxillCp}$, the spectral fitting measures a black hole spin $\textit{a}_{\rm{*}} > 0.72$ and the inclination angle of the accretion disk $i$ = $46.1_{-5.3}^{+4.0}$ degrees, at 90 per cent confidence level. In addition, the fitting results show an extreme supersolar iron abundance. Combined with the fitting results of the reflection model $\tt{reflionx\_hd}$, we consider that this unphysical iron abundance may be caused by a very high density accretion disk ( $n_{\rm{e}} > 2.34 \times 10^{21}$ $\rm{cm}^{-3}$ ) or a strong Fe K$α$ emission line. The soft excess is found in the soft state spectral fitting results, which may be an extra free-free heating effect caused by high density of the accretion disk. Finally, we discuss the robustness of black hole spin obtained by X-ray reflection spectroscopy. The result of relatively high spin is self-consistent with broadened Fe K$α$ line. Iron abundance and disk density have no effect on the spin results.
△ Less
Submitted 10 May, 2023;
originally announced May 2023.
-
CLIP-S$^4$: Language-Guided Self-Supervised Semantic Segmentation
Authors:
Wenbin He,
Suphanut Jamonnak,
Liang Gou,
Liu Ren
Abstract:
Existing semantic segmentation approaches are often limited by costly pixel-wise annotations and predefined classes. In this work, we present CLIP-S$^4$ that leverages self-supervised pixel representation learning and vision-language models to enable various semantic segmentation tasks (e.g., unsupervised, transfer learning, language-driven segmentation) without any human annotations and unknown c…
▽ More
Existing semantic segmentation approaches are often limited by costly pixel-wise annotations and predefined classes. In this work, we present CLIP-S$^4$ that leverages self-supervised pixel representation learning and vision-language models to enable various semantic segmentation tasks (e.g., unsupervised, transfer learning, language-driven segmentation) without any human annotations and unknown class information. We first learn pixel embeddings with pixel-segment contrastive learning from different augmented views of images. To further improve the pixel embeddings and enable language-driven semantic segmentation, we design two types of consistency guided by vision-language models: 1) embedding consistency, aligning our pixel embeddings to the joint feature space of a pre-trained vision-language model, CLIP; and 2) semantic consistency, forcing our model to make the same predictions as CLIP over a set of carefully designed target classes with both known and unknown prototypes. Thus, CLIP-S$^4$ enables a new task of class-free semantic segmentation where no unknown class information is needed during training. As a result, our approach shows consistent and substantial performance improvement over four popular benchmarks compared with the state-of-the-art unsupervised and language-driven semantic segmentation methods. More importantly, our method outperforms these methods on unknown class recognition by a large margin.
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
-
Iterative fluctuation ghost imaging
Authors:
Huan Zhao,
Xiao-Qian Wang,
Chao Gao,
Zhuo Yu,
Hong Wang,
Yu Wang,
Li-Dan Gou,
Zhi-Hai Yao
Abstract:
We present a new technique, iterative fluctuation ghost imaging (IFGI) which dramatically enhances the resolution of ghost imaging (GI). It is shown that, by the fluctuation characteristics of the second-order correlation function, the imaging information with the narrower point spread function (PSF) than the original information can be got. The effects arising from the PSF and the iteration times…
▽ More
We present a new technique, iterative fluctuation ghost imaging (IFGI) which dramatically enhances the resolution of ghost imaging (GI). It is shown that, by the fluctuation characteristics of the second-order correlation function, the imaging information with the narrower point spread function (PSF) than the original information can be got. The effects arising from the PSF and the iteration times also be discussed.
△ Less
Submitted 22 April, 2023;
originally announced April 2023.
-
Interpretability and causal discovery of the machine learning models to predict the production of CBM wells after hydraulic fracturing
Authors:
Chao Min,
Guoquan Wen,
Liangjie Gou,
Xiaogang Li,
Zhaozhong Yang
Abstract:
Machine learning approaches are widely studied in the production prediction of CBM wells after hydraulic fracturing, but merely used in practice due to the low generalization ability and the lack of interpretability. A novel methodology is proposed in this article to discover the latent causality from observed data, which is aimed at finding an indirect way to interpret the machine learning result…
▽ More
Machine learning approaches are widely studied in the production prediction of CBM wells after hydraulic fracturing, but merely used in practice due to the low generalization ability and the lack of interpretability. A novel methodology is proposed in this article to discover the latent causality from observed data, which is aimed at finding an indirect way to interpret the machine learning results. Based on the theory of causal discovery, a causal graph is derived with explicit input, output, treatment and confounding variables. Then, SHAP is employed to analyze the influence of the factors on the production capability, which indirectly interprets the machine learning models. The proposed method can capture the underlying nonlinear relationship between the factors and the output, which remedies the limitation of the traditional machine learning routines based on the correlation analysis of factors. The experiment on the data of CBM shows that the detected relationship between the production and the geological/engineering factors by the presented method, is coincident with the actual physical mechanism. Meanwhile, compared with traditional methods, the interpretable machine learning models have better performance in forecasting production capability, averaging 20% improvement in accuracy.
△ Less
Submitted 20 December, 2022;
originally announced December 2022.
-
Using X-ray continuum-fitting to estimate the spin of MAXI J1305-704
Authors:
Ye Feng,
James F. Steiner,
Santiago Ubach Ramirez,
Lijun Gou
Abstract:
MAXI J1305-704 is a transient X-ray binary with a black hole primary. It was discovered on April 9, 2012, during its only known outburst. MAXI J1305-704 is also a high inclination low-mass X-ray binary with prominent dip features in its light curves, so we check the full catalog of 92 \emph{Swift}/XRT continuous observations of MAXI J1305-704, focusing only on the stable spectra. We select 13 ``go…
▽ More
MAXI J1305-704 is a transient X-ray binary with a black hole primary. It was discovered on April 9, 2012, during its only known outburst. MAXI J1305-704 is also a high inclination low-mass X-ray binary with prominent dip features in its light curves, so we check the full catalog of 92 \emph{Swift}/XRT continuous observations of MAXI J1305-704, focusing only on the stable spectra. We select 13 ``gold" spectra for which the root mean square RMS <0.075 and the coronal scattered fraction $f_{\mathrm{sc}} \lesssim 25 \%$. These ``gold" data are optimal thermal-state observations for continuum-fitting modeling, in which the disk extends to the innermost-stable circular orbit and is geometrically thin. The black hole spin was unknown for this object before. By utilizing the X-ray continuum fitting method with the relativistic thin disk model \texttt{kerrbb2} and supplying the known dynamical binary system parameters, we find MAXI J1305-704 has a moderate spin ($a_{*}=0.87_{-0.13}^{+0.07}$) at a 68.3\% confidence level. This is the first determination of MAXI J1305-704's spin.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
Torque reversals and wind variations of X-ray pulsar Vela X-1
Authors:
Zhenxuan Liao,
Jiren Liu,
Lijun Gou
Abstract:
The erratic spin history of Vela X-1 shows some continuous spin-up/spin-down trend over tens of days. We study the orbital profile and spectral property of Vela X-1 in these spin-up/spin-down intervals, using the spin history monitored by Fermi/GBM and light curve from Swift/BAT and MAXI/GSC. The BAT fluxes in the spin-up intervals are about 1.6 times those of the spin-down intervals for out-of-ec…
▽ More
The erratic spin history of Vela X-1 shows some continuous spin-up/spin-down trend over tens of days. We study the orbital profile and spectral property of Vela X-1 in these spin-up/spin-down intervals, using the spin history monitored by Fermi/GBM and light curve from Swift/BAT and MAXI/GSC. The BAT fluxes in the spin-up intervals are about 1.6 times those of the spin-down intervals for out-of-eclipse orbital phases. The spin-up intervals also show a higher column density than the spin-down intervals, indicating there are more material on the orbital scale for the spin-up intervals. It could be due to the variation of the stellar wind of the optical star (HD 77581) on tens of days. The varying wind could lead to alternating prograde/retrograde accreting flow to the neutron star, which dominates the transfer of the angular momentum to Vela X-1, but not the total observed luminosity.
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
A Semantic Consistency Feature Alignment Object Detection Model Based on Mixed-Class Distribution Metrics
Authors:
Lijun Gou,
Jinrong Yang,
Hangcheng Yu,
Pan Wang,
Xiaoping Li,
Chao Deng
Abstract:
Unsupervised domain adaptation is critical in various computer vision tasks, such as object detection, instance segmentation, etc. They attempt to reduce domain bias-induced performance degradation while also promoting model application speed. Previous works in domain adaptation object detection attempt to align image-level and instance-level shifts to eventually minimize the domain discrepancy, b…
▽ More
Unsupervised domain adaptation is critical in various computer vision tasks, such as object detection, instance segmentation, etc. They attempt to reduce domain bias-induced performance degradation while also promoting model application speed. Previous works in domain adaptation object detection attempt to align image-level and instance-level shifts to eventually minimize the domain discrepancy, but they may align single-class features to mixed-class features in image-level domain adaptation because each image in the object detection task may be more than one class and object. In order to achieve single-class with single-class alignment and mixed-class with mixed-class alignment, we treat the mixed-class of the feature as a new class and propose a mixed-classes $H-divergence$ for object detection to achieve homogenous feature alignment and reduce negative transfer. Then, a Semantic Consistency Feature Alignment Model (SCFAM) based on mixed-classes $H-divergence$ was also presented. To improve single-class and mixed-class semantic information and accomplish semantic separation, the SCFAM model proposes Semantic Prediction Models (SPM) and Semantic Bridging Components (SBC). And the weight of the pix domain discriminator loss is then changed based on the SPM result to reduce sample imbalance. Extensive unsupervised domain adaption experiments on widely used datasets illustrate our proposed approach's robust object detection in domain bias settings.
△ Less
Submitted 12 June, 2022;
originally announced June 2022.
-
Self-supervised Semantic Segmentation Grounded in Visual Concepts
Authors:
Wenbin He,
William Surmeier,
Arvind Kumar Shekar,
Liang Gou,
Liu Ren
Abstract:
Unsupervised semantic segmentation requires assigning a label to every pixel without any human annotations. Despite recent advances in self-supervised representation learning for individual images, unsupervised semantic segmentation with pixel-level representations is still a challenging task and remains underexplored. In this work, we propose a self-supervised pixel representation learning method…
▽ More
Unsupervised semantic segmentation requires assigning a label to every pixel without any human annotations. Despite recent advances in self-supervised representation learning for individual images, unsupervised semantic segmentation with pixel-level representations is still a challenging task and remains underexplored. In this work, we propose a self-supervised pixel representation learning method for semantic segmentation by using visual concepts (i.e., groups of pixels with semantic meanings, such as parts, objects, and scenes) extracted from images. To guide self-supervised learning, we leverage three types of relationships between pixels and concepts, including the relationships between pixels and local concepts, local and global concepts, as well as the co-occurrence of concepts. We evaluate the learned pixel embeddings and visual concepts on three datasets, including PASCAL VOC 2012, COCO 2017, and DAVIS 2017. Our results show that the proposed method gains consistent and substantial improvements over recent unsupervised semantic segmentation approaches, and also demonstrate that visual concepts can reveal insights into image datasets.
△ Less
Submitted 26 July, 2022; v1 submitted 25 March, 2022;
originally announced March 2022.
-
Detailed analysis on the reflection component for the black hole candidate MAXI J1348-630
Authors:
Nan Jia,
Xueshan Zhao,
Lijun Gou,
Javier A. Garcia,
Zhenxuan Liao,
Ye Feng,
Yufeng Li,
Yuan Wang,
Huixian Li,
Jianfeng Wu
Abstract:
The black hole candidate MAXI J1348-630 was discovered on January 26th, 2019, with the Gas Slit Camera (GSC) on-board \textit{MAXI}. We report a detailed spectral analysis of this source by using the archived data of \textit{NuSTAR}. A total of 9 observations covered the complete outburst evolution of MAXI J1348-630 from the hard state to the soft state and finally back to the hard state. Addition…
▽ More
The black hole candidate MAXI J1348-630 was discovered on January 26th, 2019, with the Gas Slit Camera (GSC) on-board \textit{MAXI}. We report a detailed spectral analysis of this source by using the archived data of \textit{NuSTAR}. A total of 9 observations covered the complete outburst evolution of MAXI J1348-630 from the hard state to the soft state and finally back to the hard state. Additionally, the intermediate state is found in the transition from the hard state to the soft state. We use the state-of-art reflection model \verb'relxill' family to fit all the 9 spectra, and the spectra from two focal plane module detectors of \textit{NuSTAR} are jointly fitted for each observation. In particular, we concentrate on the results of the black hole spin parameter and the inclination of the accretion disk. Based on the analysis of the inner radius of the accretion disk, we obtain the spin parameter $a_* =0.78_{-0.04}^{+0.04}$, and the inclination angle of the inner disk $i = 29.2_{-0.5}^{+0.3}$ degrees. Furthermore, we also find that when the black hole is in the hard state, the accretion disk would show a significant truncation. The high iron abundance and ionization of the accretion disk obtained in the fitting results can be possibly explained by the high density of the accretion disk.
△ Less
Submitted 12 January, 2022; v1 submitted 4 January, 2022;
originally announced January 2022.
-
Novelty-based Generalization Evaluation for Traffic Light Detection
Authors:
Arvind Kumar Shekar,
Laureen Lake,
Liang Gou,
Liu Ren
Abstract:
The advent of Convolutional Neural Networks (CNNs) has led to their application in several domains. One noteworthy application is the perception system for autonomous driving that relies on the predictions from CNNs. Practitioners evaluate the generalization ability of such CNNs by calculating various metrics on an independent test dataset. A test dataset is often chosen based on only one precondi…
▽ More
The advent of Convolutional Neural Networks (CNNs) has led to their application in several domains. One noteworthy application is the perception system for autonomous driving that relies on the predictions from CNNs. Practitioners evaluate the generalization ability of such CNNs by calculating various metrics on an independent test dataset. A test dataset is often chosen based on only one precondition, i.e., its elements are not a part of the training data. Such a dataset may contain objects that are both similar and novel w.r.t. the training dataset. Nevertheless, existing works do not reckon the novelty of the test samples and treat them all equally for evaluating generalization. Such novelty-based evaluations are of significance to validate the fitness of a CNN in autonomous driving applications. Hence, we propose a CNN generalization scoring framework that considers novelty of objects in the test dataset. We begin with the representation learning technique to reduce the image data into a low-dimensional space. It is on this space we estimate the novelty of the test samples. Finally, we calculate the generalization score as a combination of the test data prediction performance and novelty. We perform an experimental study of the same for our traffic light detection application. In addition, we systematically visualize the results for an interpretable notion of novelty.
△ Less
Submitted 3 January, 2022;
originally announced January 2022.
-
The Disk Veiling Effect of the Black Hole Low-Mass X-ray Binary A0620-00
Authors:
Wan-Min Zheng,
Qiaoya Wu,
Jianfeng Wu,
Song Wang,
Mouyuan Sun,
Jing Guo,
Junhui Liu,
Tuan Yi,
Zhi-Xiang Zhang,
Wei-Min Gu,
Junfeng Wang,
Lijun Gou,
Jifeng Liu,
Paul J. Callanan,
Luis C. Ho,
Penélope Longa-Peña,
Jerome A. Orosz,
Mark T. Reynolds
Abstract:
The optical light curves of quiescent black hole low-mass X-ray binaries often exhibit significant non-ellipsoidal variabilities, showing the photospheric radiation of the companion star is veiled by other source of optical emission. Assessing this "veiling" effect is critical to the black hole mass measurement. Here in this work, we carry out a strictly simultaneous spectroscopic and photometric…
▽ More
The optical light curves of quiescent black hole low-mass X-ray binaries often exhibit significant non-ellipsoidal variabilities, showing the photospheric radiation of the companion star is veiled by other source of optical emission. Assessing this "veiling" effect is critical to the black hole mass measurement. Here in this work, we carry out a strictly simultaneous spectroscopic and photometric campaign on the prototype of black hole low-mass X-ray binary A0620-00. We find that for each observation epoch, the extra optical flux beyond a pure ellipsoidal modulation is positively correlated with the fraction of veiling emission, indicating the accretion disk contributes most of the non-ellipsoidal variations. Meanwhile, we also obtain a K2V spectral classification of the companion, as well as the measurements of the companion's rotational velocity $v \sin i = 83.8\pm1.9$ km s$^{-1}$ and the mass ratio between the companion and the black hole $q=0.063\pm0.004$.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Estimating the spin of the black hole candidate MAXI J1659-152 with the X-ray continuum-fitting method
Authors:
Ye Feng,
Xueshan Zhao,
Lijun Gou,
Jianfeng Wu,
James F. Steiner,
Yufeng Li,
Zhenxuan Liao,
Nan Jia,
Yuan Wang
Abstract:
As a transient X-ray binary, MAXI J1659-152 contains a black hole candidate as its compact star. MAXI J1659-152 was discovered on 2010 September 25 during its only known outburst. Previously-published studies of this outburst indicate that MAXI J1659-152 may have an extreme retrograde spin, which, if confirmed, would provide an important clue as to the origin of black hole spin. In this paper, uti…
▽ More
As a transient X-ray binary, MAXI J1659-152 contains a black hole candidate as its compact star. MAXI J1659-152 was discovered on 2010 September 25 during its only known outburst. Previously-published studies of this outburst indicate that MAXI J1659-152 may have an extreme retrograde spin, which, if confirmed, would provide an important clue as to the origin of black hole spin. In this paper, utilizing updated dynamical binary-system parameters (i.e. the black hole mass, the orbital inclination and the source distance) provided by \cite{Torres2021}, we analyze 65 spectra of MAXI J1659-152 from \emph{RXTE}/PCA, in order to assess the spin parameter. With a final selection of 9 spectra matching our $f_{\mathrm{sc}} \lesssim 25 \%$, soft-state criteria, we apply a relativistic thin disk spectroscopic model \texttt{kerrbb2} over 3.0-45.0 keV. We find that inclination angle correlates inversely with spin, and, considering the possible values for inclination angle, we constrain spin to be $-1 < a_{*} \lesssim 0.44$ at 90\% confidence interval via X-ray continuum-fitting. We can only rule out an extreme prograde (positive) spin. We confirm that an extreme retrograde solution is possible and is not ruled out by considering accretion torques given the young age of the system.
△ Less
Submitted 6 December, 2021;
originally announced December 2021.
-
The Spin of New Black Hole Candidate: MAXI J1803-298 Observed by NuSTAR and NICER
Authors:
Ye Feng,
Xueshan Zhao,
Yufeng Li,
Lijun Gou,
Nan Jia,
Zhenxuan Liao,
Yuan Wang
Abstract:
MAXI J1803-298, a newly-discovered Galactic transient and black hole candidate, was first detected by \emph{MAXI}/GSC on May 1st, 2021. In this paper, we present a detailed spectral analysis of MAXI J1803-298. Utilizing the X-ray reflection fitting method, we perform a joint fit to the spectra of MAXI J1803-298, respectively, observed by \emph{NuSTAR} and \emph{NICER}/XTI on the same day over the…
▽ More
MAXI J1803-298, a newly-discovered Galactic transient and black hole candidate, was first detected by \emph{MAXI}/GSC on May 1st, 2021. In this paper, we present a detailed spectral analysis of MAXI J1803-298. Utilizing the X-ray reflection fitting method, we perform a joint fit to the spectra of MAXI J1803-298, respectively, observed by \emph{NuSTAR} and \emph{NICER}/XTI on the same day over the energy range between 0.7-79.0 keV, and found its spin (and the inclination angle i) can be constrained to be close to an extreme value, 0.991 ($i\sim$ $70 ^{\circ}$), at 68\% confidence interval. The results suggest that MAXI J1803-298 may be a fast-rotating black hole with a large inclination angle.
△ Less
Submitted 5 July, 2022; v1 submitted 6 December, 2021;
originally announced December 2021.
-
Torque reversal and orbital profile of X-ray pulsar OAO 1657-415
Authors:
Zhenxuan Liao,
Jiren Liu,
Peter A. Jenke,
Lijun Gou
Abstract:
OAO 1657-415 is an atypical supergiant X-ray binary among wind-fed and disk-fed systems, showing alternate spin-up/spin-down intervals lasting on the order of tens of days. We study different torque states of OAO 1657-415 based on the spin history monitored by {\it Fermi}/GBM, together with fluxes from {\it Swift}/BAT and {\it MAXI}/GSC. Its spin frequency derivatives are well correlated with {\it…
▽ More
OAO 1657-415 is an atypical supergiant X-ray binary among wind-fed and disk-fed systems, showing alternate spin-up/spin-down intervals lasting on the order of tens of days. We study different torque states of OAO 1657-415 based on the spin history monitored by {\it Fermi}/GBM, together with fluxes from {\it Swift}/BAT and {\it MAXI}/GSC. Its spin frequency derivatives are well correlated with {\it Swift}/BAT fluxes during rapid spin-up episodes, anti-correlated with {\it Swift}/BAT fluxes during rapid spin-down episodes, and not correlated in between. The orbital profile of spin-down episodes is reduced by a factor of 2 around orbital phases of 0.2 and 0.8 compared to that of spin-up episodes. The orbital hardness ratio profile of spin-down episodes is also lower than that of spin-up episodes around phases close to the mid-eclipse, implying that there is more material between the neutron star and the observer for spin-down episodes than for spin-up episodes around these phases. These results indicate that the torque state of the neutron star is connected with the material flow on orbital scale and support the retrograde/prograde disk accretion scenario for spin-down/spin-up torque reversal.
△ Less
Submitted 3 December, 2021;
originally announced December 2021.
-
Second-order Cumulants Ghost Imaging
Authors:
Huan Zhao,
Xiao-Qian Wang,
Chao Gao,
Zhuo Yu,
Shuang Wang,
Li-Dan Gou,
Zhi-Hai Yao
Abstract:
In the conventional ghost imaging (GI), the image is retrieved by correlating the reference intensity fluctuation at a charge-coupled device (CCD) with the signal intensity fluctuation at a bucket detector. In this letter, we present the protocol of GI, it is called Second-order Cumulants ghost imaging (SCGI). The image is retrieved by the fluctuation information of correlating intensity fluctuati…
▽ More
In the conventional ghost imaging (GI), the image is retrieved by correlating the reference intensity fluctuation at a charge-coupled device (CCD) with the signal intensity fluctuation at a bucket detector. In this letter, we present the protocol of GI, it is called Second-order Cumulants ghost imaging (SCGI). The image is retrieved by the fluctuation information of correlating intensity fluctuation at two detectors, and the resolution limit can be enhanced than conventional GI. The experimental results of SCGI agreement with theoretical results.
△ Less
Submitted 21 October, 2021; v1 submitted 16 October, 2021;
originally announced October 2021.
-
Spectral Analysis of New Black Hole Candidate AT2019wey Observed by NuSTAR
Authors:
Ye Feng,
Xueshan Zhao,
Lijun Gou,
Yufeng Li,
James F. Steiner,
Javier A. García,
Yuan Wang,
Nan Jia,
Zhenxuan Liao,
Huixian Li
Abstract:
AT2019wey is a new galactic X-ray binary that was first discovered as an optical transient by the Australia Telescope Large Area Survey (ATLAS) on December 7, 2019. AT2019wey consists of a black hole candidate as well as a low-mass companion star ($M_{\text {star }} \lesssim 0.8 M_{\odot}$) and is likely to have a short orbital period ($P_{\text {orb }} \lesssim 8$ h). Although AT2019wey began act…
▽ More
AT2019wey is a new galactic X-ray binary that was first discovered as an optical transient by the Australia Telescope Large Area Survey (ATLAS) on December 7, 2019. AT2019wey consists of a black hole candidate as well as a low-mass companion star ($M_{\text {star }} \lesssim 0.8 M_{\odot}$) and is likely to have a short orbital period ($P_{\text {orb }} \lesssim 8$ h). Although AT2019wey began activation in the X-ray band during almost the entire outburst on March 8, 2020, it did not enter the soft state during the entire outburst. In this study, we present a detailed spectral analysis of AT2019wey in the low/hard state during its X-ray outburst on the basis of Nuclear Spectroscopic Telescope Array \emph observations. We obtain tight constraints on several of its important physical parameters by applying the State-of-art \texttt{relxill} relativistic reflection model family. In particular, we determine that the measured inner radius of the accretion disk is most likely to have extended to the innermost stable circular orbit (ISCO) radius, i.e., $R_{\text{in}}=1.38^{+0.23}_{-0.16}~R_{\text{ISCO}}$. Hence, assuming $R_{\text{in}}$=$R_{\text{ISCO}}$, we find the spin of AT2019wey to be $a_{*}\sim$ $0.97$, which is close to the extreme and an inner disk inclination angle of ~$i\sim$ $22 ^{\circ}$. Additionally, according to our adopted models, AT2019wey tends to have a relatively high iron abundance of $A_{\mathrm{Fe}}\sim$ 5 $A_{\mathrm{Fe}, \odot}$ and a high disk ionization state of $\log ξ\sim$ 3.4.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Gaussian Guided IoU: A Better Metric for Balanced Learning on Object Detection
Authors:
Shengkai Wu,
Jinrong Yang,
Hangcheng Yu,
Lijun Gou,
Xiaoping Li
Abstract:
For most of the anchor-based detectors, Intersection over Union(IoU) is widely utilized to assign targets for the anchors during training. However, IoU pays insufficient attention to the closeness of the anchor's center to the truth box's center. This results in two problems: (1) only one anchor is assigned to most of the slender objects which leads to insufficient supervision information for the…
▽ More
For most of the anchor-based detectors, Intersection over Union(IoU) is widely utilized to assign targets for the anchors during training. However, IoU pays insufficient attention to the closeness of the anchor's center to the truth box's center. This results in two problems: (1) only one anchor is assigned to most of the slender objects which leads to insufficient supervision information for the slender objects during training and the performance on the slender objects is hurt; (2) IoU can not accurately represent the alignment degree between the receptive field of the feature at the anchor's center and the object. Thus during training, some features whose receptive field aligns better with objects are missing while some features whose receptive field aligns worse with objects are adopted. This hurts the localization accuracy of models. To solve these problems, we firstly design Gaussian Guided IoU(GGIoU) which focuses more attention on the closeness of the anchor's center to the truth box's center. Then we propose GGIoU-balanced learning method including GGIoU-guided assignment strategy and GGIoU-balanced localization loss. The method can assign multiple anchors for each slender object and bias the training process to the features well-aligned with objects. Extensive experiments on the popular benchmarks such as PASCAL VOC and MS COCO demonstrate GGIoU-balanced learning can solve the above problems and substantially improve the performance of the object detection model, especially in the localization accuracy.
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Carton dataset synthesis method for domain shift based on foreground texture decoupling and replacement
Authors:
Lijun Gou,
Shengkai Wu,
Jinrong Yang,
Hangcheng Yu,
Chenxi Lin,
Xiaoping Li,
Chao Deng
Abstract:
One major impediment in rapidly deploying object detection models for industrial applications is the lack of large annotated datasets. We currently have presented the Sacked Carton Dataset(SCD) that contains carton images from three scenarios, such as comprehensive pharmaceutical logistics company(CPLC), e-commerce logistics company(ECLC), fruit market(FM). However, due to domain shift, the model…
▽ More
One major impediment in rapidly deploying object detection models for industrial applications is the lack of large annotated datasets. We currently have presented the Sacked Carton Dataset(SCD) that contains carton images from three scenarios, such as comprehensive pharmaceutical logistics company(CPLC), e-commerce logistics company(ECLC), fruit market(FM). However, due to domain shift, the model trained with one of the three scenarios in SCD has poor generalization ability when applied to the rest scenarios. To solve this problem, a novel image synthesis method is proposed to replace the foreground texture of the source datasets with the texture of the target datasets. Our method can keep the context relationship of foreground objects and backgrounds unchanged and greatly augment the target datasets. We firstly propose a surface segmentation algorithm to achieve texture decoupling of each instance. Secondly, a contour reconstruction algorithm is proposed to keep the occlusion and truncation relationship of the instance unchanged. Finally, the Gaussian fusion algorithm is used to replace the foreground texture from the source datasets with the texture from the target datasets. The novel image synthesis method can largely boost AP by at least 4.3%~6.5% on RetinaNet and 3.4%~6.8% on Faster R-CNN for the target domain. Code is available at https://github.com/hustgetlijun/RCAN.
△ Less
Submitted 26 April, 2021; v1 submitted 19 March, 2021;
originally announced March 2021.
-
SCD: A Stacked Carton Dataset for Detection and Segmentation
Authors:
Jinrong Yang,
Shengkai Wu,
Lijun Gou,
Hangcheng Yu,
Chenxi Lin,
Jiazhuo Wang,
Minxuan Li,
Xiaoping Li
Abstract:
Carton detection is an important technique in the automatic logistics system and can be applied to many applications such as the stacking and unstacking of cartons, the unloading of cartons in the containers. However, there is no public large-scale carton dataset for the research community to train and evaluate the carton detection models up to now, which hinders the development of carton detectio…
▽ More
Carton detection is an important technique in the automatic logistics system and can be applied to many applications such as the stacking and unstacking of cartons, the unloading of cartons in the containers. However, there is no public large-scale carton dataset for the research community to train and evaluate the carton detection models up to now, which hinders the development of carton detection. In this paper, we present a large-scale carton dataset named Stacked Carton Dataset(SCD) with the goal of advancing the state-of-the-art in carton detection. Images are collected from the internet and several warehourses, and objects are labeled using per-instance segmentation for precise localization. There are totally 250,000 instance masks from 16,136 images. In addition, we design a carton detector based on RetinaNet by embedding Offset Prediction between Classification and Localization module(OPCL) and Boundary Guided Supervision module(BGS). OPCL alleviates the imbalance problem between classification and localization quality which boosts AP by 3.1% - 4.7% on SCD while BGS guides the detector to pay more attention to boundary information of cartons and decouple repeated carton textures. To demonstrate the generalization of OPCL to other datasets, we conduct extensive experiments on MS COCO and PASCAL VOC. The improvement of AP on MS COCO and PASCAL VOC is 1.8% - 2.2% and 3.4% - 4.3% respectively.
△ Less
Submitted 25 February, 2021;
originally announced February 2021.
-
Re-estimating the Spin Parameter of the Black Hole in Cygnus X-1
Authors:
Xueshan Zhao,
Lijun Gou,
Yanting Dong,
Xueying Zheng,
James F. Steiner,
James C. A. Miller-Jones,
Arash Bahramian,
Jerome A. Orosz,
Ye Feng
Abstract:
Cygnus X-1 is a well-studied persistent black hole X-ray binary. Recently, the three parameters needed to estimate the black hole spin of this system, namely the black hole mass $M$, the orbital inclination $i$ and the source distance $D$, have been updated. In this work we redetermine the spin parameter using the continuum-fitting technique for those updated parameter values. Based on the assumpt…
▽ More
Cygnus X-1 is a well-studied persistent black hole X-ray binary. Recently, the three parameters needed to estimate the black hole spin of this system, namely the black hole mass $M$, the orbital inclination $i$ and the source distance $D$, have been updated. In this work we redetermine the spin parameter using the continuum-fitting technique for those updated parameter values. Based on the assumption that the spin axis of the black hole is aligned with the orbital plane, we fit the thermal disk component to a fully relativistic thin accretion disk model. The error in the spin estimate arising from the combined observational uncertainties is obtained via Monte Carlo (MC) simulations. We demonstrate that, without considering the counteracting torque effect, the new spin parameter is constrained to be a$_* > 0.9985$ (3$σ$), which confirms that the spin of the black hole in Cygnus X-1 is extreme.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
Cygnus X-1 contains a 21-solar mass black hole -- implications for massive star winds
Authors:
James C. A. Miller-Jones,
Arash Bahramian,
Jerome A. Orosz,
Ilya Mandel,
Lijun Gou,
Thomas J. Maccarone,
Coenraad J. Neijssel,
Xueshan Zhao,
Janusz Ziółkowski,
Mark J. Reid,
Phil Uttley,
Xueying Zheng,
Do-Young Byun,
Richard Dodson,
Victoria Grinberg,
Taehyun Jung,
Jeong-Sook Kim,
Benito Marcote,
Sera Markoff,
María J. Rioja,
Anthony P. Rushton,
David M. Russell,
Gregory R. Sivakoff,
Alexandra J. Tetarenko,
Valeriu Tudose
, et al. (1 additional authors not shown)
Abstract:
The evolution of massive stars is influenced by the mass lost to stellar winds over their lifetimes. These winds limit the masses of the stellar remnants (such as black holes) that the stars ultimately produce. We use radio astrometry to refine the distance to the black hole X-ray binary Cygnus X-1, which we find to be $2.22^{+0.18}_{-0.17}$ kiloparsecs. When combined with previous optical data, t…
▽ More
The evolution of massive stars is influenced by the mass lost to stellar winds over their lifetimes. These winds limit the masses of the stellar remnants (such as black holes) that the stars ultimately produce. We use radio astrometry to refine the distance to the black hole X-ray binary Cygnus X-1, which we find to be $2.22^{+0.18}_{-0.17}$ kiloparsecs. When combined with previous optical data, this implies a black hole mass of $21.2\pm2.2$ solar masses, higher than previous measurements. The formation of such a high-mass black hole in a high-metallicity system constrains wind mass loss from massive stars.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
Estimating the black hole spin for the X-ray binary MAXI J1820+070
Authors:
Xueshan Zhao,
Lijun Gou,
Yanting Dong,
Youli Tuo,
Zhenxuan Liao,
Yufeng Li,
Nan Jia,
Ye Feng,
James F. Steiner
Abstract:
MAXI J1820+070 is a newly-discovered black hole X-ray binary, whose dynamical parameters, namely the black hole mass, the inclination angle and the source distance, have been estimated recently. \emph{Insight}-HXMT have observed its entire outburst from March 14th, 2018. In this work, we attempted to estimate the spin parameter~$a_*$, using the continuum-fitting method and applying a fully-relativ…
▽ More
MAXI J1820+070 is a newly-discovered black hole X-ray binary, whose dynamical parameters, namely the black hole mass, the inclination angle and the source distance, have been estimated recently. \emph{Insight}-HXMT have observed its entire outburst from March 14th, 2018. In this work, we attempted to estimate the spin parameter~$a_*$, using the continuum-fitting method and applying a fully-relativistic thin disk model to the soft-state spectra obtained by \emph{Insight}-HXMT. It is well know that $a_*$ is strongly dependent on three dynamical parameters in this method, and we have examined two sets of parameters. Adopting our preferred parameters: $M$ = $8.48^{+0.79}_{-0.72}~M_\odot$, $i=63^\circ\pm3^\circ$ and $D=2.96\pm0.33$ kpc, we found a slowly-spinning black hole of $a_*=0.14 \pm 0.09$ ($1σ$), which give a prograde spin parameter as majority of other systems show. While it is also possible for the black hole to have a retrograde spin (less than 0) if different dynamical parameters are taken.
△ Less
Submitted 2 June, 2021; v1 submitted 10 December, 2020;
originally announced December 2020.
-
VATLD: A Visual Analytics System to Assess, Understand and Improve Traffic Light Detection
Authors:
Liang Gou,
Lincan Zou,
Nanxiang Li,
Michael Hofmann,
Arvind Kumar Shekar,
Axel Wendt,
Liu Ren
Abstract:
Traffic light detection is crucial for environment perception and decision-making in autonomous driving. State-of-the-art detectors are built upon deep Convolutional Neural Networks (CNNs) and have exhibited promising performance. However, one looming concern with CNN based detectors is how to thoroughly evaluate the performance of accuracy and robustness before they can be deployed to autonomous…
▽ More
Traffic light detection is crucial for environment perception and decision-making in autonomous driving. State-of-the-art detectors are built upon deep Convolutional Neural Networks (CNNs) and have exhibited promising performance. However, one looming concern with CNN based detectors is how to thoroughly evaluate the performance of accuracy and robustness before they can be deployed to autonomous vehicles. In this work, we propose a visual analytics system, VATLD, equipped with a disentangled representation learning and semantic adversarial learning, to assess, understand, and improve the accuracy and robustness of traffic light detectors in autonomous driving applications. The disentangled representation learning extracts data semantics to augment human cognition with human-friendly visual summarization, and the semantic adversarial learning efficiently exposes interpretable robustness risks and enables minimal human interaction for actionable insights. We also demonstrate the effectiveness of various performance improvement strategies derived from actionable insights with our visual analytics system, VATLD, and illustrate some practical implications for safety-critical applications in autonomous driving.
△ Less
Submitted 27 September, 2020;
originally announced September 2020.
-
Towards a Flexible Embedding Learning Framework
Authors:
Chin-Chia Michael Yeh,
Dhruv Gelda,
Zhongfang Zhuang,
Yan Zheng,
Liang Gou,
Wei Zhang
Abstract:
Representation learning is a fundamental building block for analyzing entities in a database. While the existing embedding learning methods are effective in various data mining problems, their applicability is often limited because these methods have pre-determined assumptions on the type of semantics captured by the learned embeddings, and the assumptions may not well align with specific downstre…
▽ More
Representation learning is a fundamental building block for analyzing entities in a database. While the existing embedding learning methods are effective in various data mining problems, their applicability is often limited because these methods have pre-determined assumptions on the type of semantics captured by the learned embeddings, and the assumptions may not well align with specific downstream tasks. In this work, we propose an embedding learning framework that 1) uses an input format that is agnostic to input data type, 2) is flexible in terms of the relationships that can be embedded into the learned representations, and 3) provides an intuitive pathway to incorporate domain knowledge into the embedding learning process. Our proposed framework utilizes a set of entity-relation-matrices as the input, which quantifies the affinities among different entities in the database. Moreover, a sampling mechanism is carefully designed to establish a direct connection between the input and the information captured by the output embeddings. To complete the representation learning toolbox, we also outline a simple yet effective post-processing technique to properly visualize the learned embeddings. Our empirical results demonstrate that the proposed framework, in conjunction with a set of relevant entity-relation-matrices, outperforms the existing state-of-the-art approaches in various data mining tasks.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
The spin measurement of the black hole in 4U 1543-47 constrained with the X-ray reflected emission
Authors:
Yanting Dong,
Javier A. García,
James F. Steiner,
Lijun Gou
Abstract:
4U 1543-47 is a low mass X-ray binary which harbours a stellar-mass black hole located in our Milky Way galaxy. In this paper, we revisit 7 data sets which were in the Steep Power Law state of the 2002 outburst. The spectra were observed by the Rossi X-ray Timing Explorer. We have carefully modelled the X-ray reflection spectra, and made a joint-fit to these spectra with relxill, for the reflected…
▽ More
4U 1543-47 is a low mass X-ray binary which harbours a stellar-mass black hole located in our Milky Way galaxy. In this paper, we revisit 7 data sets which were in the Steep Power Law state of the 2002 outburst. The spectra were observed by the Rossi X-ray Timing Explorer. We have carefully modelled the X-ray reflection spectra, and made a joint-fit to these spectra with relxill, for the reflected emission. We found a moderate black hole spin, which is $0.67_{-0.08}^{+0.15}$ at 90% statistical confidence. Negative and low spins (< 0.5) at more than 99% statistical confidence are ruled out. In addition, our results indicate that the model requires a super-solar iron abundance: $5.05_{-0.26}^{+1.21}$, and the inclination angle of the inner disc is $36.3_{-3.4}^{+5.3}$ degrees. This inclination angle is appreciably larger than the binary orbital inclination angle (~21 degrees); this difference is possibly a systematic artefact of the artificially low-density employed in the reflection model for this X-ray binary system.
△ Less
Submitted 27 February, 2020;
originally announced February 2020.
-
A detailed study on the reflection component for the Black Hole Candidate MAXI J1836-194
Authors:
Yanting Dong,
Javier A. García,
Zhu Liu,
Xueshan Zhao,
Xueying Zheng,
Lijun Gou
Abstract:
We present a detailed spectral analysis of the black hole candidate MAXI J1836-194. The source was caught in the intermediate state during its 2011 outburst by Suzaku and RXTE. We jointly fit the X-ray data from these two missions using the relxill model to study the reflection component, and a steep inner emissivity profile indicating a compact corona as the primary source is required in order to…
▽ More
We present a detailed spectral analysis of the black hole candidate MAXI J1836-194. The source was caught in the intermediate state during its 2011 outburst by Suzaku and RXTE. We jointly fit the X-ray data from these two missions using the relxill model to study the reflection component, and a steep inner emissivity profile indicating a compact corona as the primary source is required in order to achieve a good fit. In addition, a reflection model with a lamp-post configuration (relxilllp), which is normally invoked to explain the steep emissivity profile, gives a worse fit and is excluded at 99% confidence level compared to relxill. We also explore the effect of the ionization gradient on the emissivity profile by fitting the data with two relativistic reflection components, and it is found that the inner emissivity flattens. These results may indicate that the ionization state of the disc is not constant. All the models above require a supersolar iron abundance higher than 4.5. However, we find that the high-density version of reflionx can describe the same spectra even with solar iron abundance well. A moderate rotating black hole (a* = 0.84-0.94) is consistently obtained by our models, which is in agreement with previously reported values.
△ Less
Submitted 9 February, 2020;
originally announced February 2020.
-
Testing general relativity with the stellar-mass black hole in LMC X-1 using the continuum-fitting method
Authors:
Ashutosh Tripathi,
Menglei Zhou,
Askar B. Abdikamalov,
Dimitry Ayzenberg,
Cosimo Bambi,
Lijun Gou,
Victoria Grinberg,
Honghui Liu,
James F. Steiner
Abstract:
The iron line and the continuum-fitting methods are currently the two leading techniques for measuring black hole spins with electromagnetic radiation. They can be naturally extended for probing the spacetime geometry around black holes and testing general relativity in the strong field regime. In the past couple of years, there has been significant work to use the iron line method to test the nat…
▽ More
The iron line and the continuum-fitting methods are currently the two leading techniques for measuring black hole spins with electromagnetic radiation. They can be naturally extended for probing the spacetime geometry around black holes and testing general relativity in the strong field regime. In the past couple of years, there has been significant work to use the iron line method to test the nature of black holes. In this Letter, we use the continuum-fitting method and we show its capability of constraining the spacetime geometry around black holes by analyzing 17 RXTE data of the X-ray binary LMC X-1.
△ Less
Submitted 6 July, 2020; v1 submitted 23 January, 2020;
originally announced January 2020.
-
Spectral evidence of an accretion disk in wind-fed X-ray pulsar Vela X-1 during an unusual spin-up period
Authors:
Zhenxuan Liao,
Jiren Liu,
Xueying Zheng,
Lijun Gou
Abstract:
In classical supergiant X-ray binaries (SgXBs), the Bondi-Hoyle-Lyttleton wind accretion was usually assumed, and the angular momentum transport to the accretors is inefficient. The observed spin-up/spin-down behavior of the neutron star in SgXBs is not well understood. In this paper, we report an extended low state of Vela X-1 (at orbital phases 0.16-0.2), lasting for at least 30 ks, observed wit…
▽ More
In classical supergiant X-ray binaries (SgXBs), the Bondi-Hoyle-Lyttleton wind accretion was usually assumed, and the angular momentum transport to the accretors is inefficient. The observed spin-up/spin-down behavior of the neutron star in SgXBs is not well understood. In this paper, we report an extended low state of Vela X-1 (at orbital phases 0.16-0.2), lasting for at least 30 ks, observed with Chandra during the onset of an unusual spin-up period. During this low state, the continuum fluxes dropped by a factor of 10 compared to the preceding flare period, and the continuum pulsation almost disappeared. Meanwhile, the Fe K$α$ fluxes of the low state were similar to the preceding flare period, leading to an Fe K$α$ equivalent width (EW) of 0.6 keV, as high as the Fe K$α$ EW during the eclipse phase of Vela X-1. Both the pulsation cessation and the high Fe K$α$ EW indicate an axisymmetric structure with a column density larger than $10^{24}\rm cm^{-2}$ on a spatial scale of the accretion radius of Vela X-1. These phenomena are consistent with the existence of an accretion disk that leads to the following spin-up of Vela X-1. It indicates that disk accretion, although not always, does occur in classical wind-fed SgXBs.
△ Less
Submitted 16 January, 2020;
originally announced January 2020.
-
The spatial distribution of circumstellar material of the wind-fed system GX 301-2
Authors:
Xueying Zheng,
Jiren Liu,
Lijun Gou
Abstract:
The distribution of the circumstellar material in systems of supergiant X-ray binaries (SgXBs) is complex and not well probed observationally. We report a detailed study of the spatial distribution of the Fe Kα-emitting material in the wind-fed system GX 301-2, by measuring the time delay between the Fe Kα line and the hard X-ray continuum (7.8-12 keV) using the cross-correlation method, based on…
▽ More
The distribution of the circumstellar material in systems of supergiant X-ray binaries (SgXBs) is complex and not well probed observationally. We report a detailed study of the spatial distribution of the Fe Kα-emitting material in the wind-fed system GX 301-2, by measuring the time delay between the Fe Kα line and the hard X-ray continuum (7.8-12 keV) using the cross-correlation method, based on XMM-Newton observation. We found that to obtain the true time delay, it is crucial to subtract the underlying continuum of the Fe Kα line. The measured size of the Fe Kα-emitting region over the whole observation period is 40 {\pm} 20 light-seconds. It is 5 times larger than the accretion radius estimated from a quasi-isotropic stellar wind, but consistent with the one estimated from a tidal stream, which could be the dominant mass-loss mechanism of GX 301-2 as inferred from the orbital distribution of the absorption column density previously. The measured time delay of the quiescent period is a little smaller than those of the flare periods, revealing the unsteady behaviour of the accretion flow in GX 301-2. Statistical and detailed temporal studies of the circumstellar material in SgXBs are expected for a large sample of SgXBs with future X-ray missions, such as Athena and eXTP.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Constraining the stochastic gravitational wave from string cosmology with current and future high frequency detectors
Authors:
Yufeng Li,
Xilong Fan,
Lijun Gou
Abstract:
Pre-Big-Bang models in string cosmology predict a relic background of gravitational wave radiation in the early universe. The spectrum of this background shows that the energy density rises rapidly with frequency, which is an interesting target for high-frequency (i.e., kilohertz) detectors. In this paper, we discussed the constraining power of multiple configurations of current and future gravita…
▽ More
Pre-Big-Bang models in string cosmology predict a relic background of gravitational wave radiation in the early universe. The spectrum of this background shows that the energy density rises rapidly with frequency, which is an interesting target for high-frequency (i.e., kilohertz) detectors. In this paper, we discussed the constraining power of multiple configurations of current and future gravitational wave detector (GWD) networks to the stochastic background predicted in string cosmology. The constraining power is jointly determined by the overlap reduction function and the sensitivity curves of multiple detectors. And we further elaborated on the possible contribution of a future Chinese detector and a kilohertz detector to the constraining power of detector network for stochastic background in string cosmology. Our results show that the detectability of the GWD network for the string cosmology gravitational wave background will improve considerably with the joining of a Chinese detector. This is because a Chinese detector (e.g. located at Wuhan ) together with KAGRA, has a better overlap reduction function than the laser interferometer gravitational wave observatory detector pair, and therefore lead to more stringent limits for stochastic background detection. And with ideal overlap reduction function, namely, colocated detectors, a kilohertz sensitivity curve has better performance than previous detectors for stochastic background detection. Finally, the results are compared with the limitations given by the observational constraint of the Big Bang nucleosynthesis bound.
△ Less
Submitted 25 November, 2019; v1 submitted 18 October, 2019;
originally announced October 2019.
-
Neural Architecture Search for Joint Optimization of Predictive Power and Biological Knowledge
Authors:
Zijun Zhang,
Linqi Zhou,
Liangke Gou,
Ying Nian Wu
Abstract:
We report a neural architecture search framework, BioNAS, that is tailored for biomedical researchers to easily build, evaluate, and uncover novel knowledge from interpretable deep learning models. The introduction of knowledge dissimilarity functions in BioNAS enables the joint optimization of predictive power and biological knowledge through searching architectures in a model space. By optimizin…
▽ More
We report a neural architecture search framework, BioNAS, that is tailored for biomedical researchers to easily build, evaluate, and uncover novel knowledge from interpretable deep learning models. The introduction of knowledge dissimilarity functions in BioNAS enables the joint optimization of predictive power and biological knowledge through searching architectures in a model space. By optimizing the consistency with existing knowledge, we demonstrate that BioNAS optimal models reveal novel knowledge in both simulated data and in real data of functional genomics. BioNAS provides a useful tool for domain experts to inject their prior belief into automated machine learning and therefore making deep learning easily accessible to practitioners. BioNAS is available at https://github.com/zj-zhang/BioNAS-pub.
△ Less
Submitted 1 September, 2019;
originally announced September 2019.
-
Novel two-dimensional Ca-Cl crystals with metallicity, piezoelectric effect and room-temperature ferromagnetism
Authors:
Lei Zhang,
Guosheng Shi,
Bingquan Peng,
Pengfei Gao,
Liang Chen,
Ni Zhong,
Liuhua Mu,
Han Han,
Lijing Zhang,
Peng Zhang,
Lu Gou,
Yimin Zhao,
Shanshan Liang,
Jie Jiang,
Zejun Zhang,
Hongtao Ren,
Xiaoling Lei,
Long Yan,
Chungang Duan,
Shengli Zhang,
Haiping Fang
Abstract:
Recently we have reported the direct observation of two-dimensional (2D) Ca-Cl crystals on reduced graphene oxide (rGO) membranes, in which the calcium ions are only about monovalent (i.e. ~+1) and metallic rather than insulating properties are displayed by those CaCl crystals. Here, we report the experimental observation and demonstration of the formation of graphene-Ca-Cl heterojunction owing to…
▽ More
Recently we have reported the direct observation of two-dimensional (2D) Ca-Cl crystals on reduced graphene oxide (rGO) membranes, in which the calcium ions are only about monovalent (i.e. ~+1) and metallic rather than insulating properties are displayed by those CaCl crystals. Here, we report the experimental observation and demonstration of the formation of graphene-Ca-Cl heterojunction owing to the metallicity of 2D Ca-Cl crystals, unexpected piezoelectric effect, room-temperature ferromagnetism, as well as the distinct hydrogen storage and release capability of the Ca-Cl crystals in rGO membranes. Theoretical studies show that the formation of those abnormal crystals is attributed to the strong cation-pi interactions of the Ca2+ with the aromatic rings in the graphitic surfaces. Since strong cation-pi interactions also exist between other metal ions (such as Mg2+, Fe2+, Co2+, Cu2+, Cd2+, Cr2+ and Pb2+) and graphitic surfaces, similar 2D crystals with abnormal valence state of the metal cations and corresponding abnormal properties as well as novel applications are highly expected. Those findings further show the realistically potential applications of such abnormal CaCl material with unusual electronic properties in designing novel transistors and magnetic devices, hydrogen storage, catalyzer, high-performance conducting electrodes and sensors, with a size down to atomic scale.
△ Less
Submitted 9 May, 2019;
originally announced May 2019.
-
Constraining cosmological parameters in FLRW metric with lensed GW+EM signals
Authors:
Yufeng Li,
Xilong Fan,
Lijun Gou
Abstract:
We proposed a model-independent method to constrain the cosmological parameters using the Distance Sum Rule of the FLRW metric by combining the time delay distances and the comoving distances through a multi-messenger approach. The time delay distances are measured from lensed gravitational wave~(GW) signals together with their corresponding electromagnetic wave~(EM) counterpart, while the comovin…
▽ More
We proposed a model-independent method to constrain the cosmological parameters using the Distance Sum Rule of the FLRW metric by combining the time delay distances and the comoving distances through a multi-messenger approach. The time delay distances are measured from lensed gravitational wave~(GW) signals together with their corresponding electromagnetic wave~(EM) counterpart, while the comoving distances are obtained from a parametrized fitting approach with independent supernova observations. With a series of simulations based on Einstein Telescope, Large Synoptic Survey Telescope and The Dark Energy Survey, we find that only 10 lensed GW+EM systems can achieve the constraining power comparable to and even stronger than 300 lensed quasar systems due to more precise time delay from lensed GW signals. Specifically, the cosmological parameters can be constrained to ~$k=0.01_{-0.05}^{+0.05}$ and ~$H_0=69.7_{-0.35}^{+0.35}$ (1$σ$). Our results show that more precise time delay measurements could provide more stringent cosmological parameter values, and lensed GW+EM systems therefore can be applied as a powerful tool in the future precision cosmology.
△ Less
Submitted 29 January, 2019;
originally announced January 2019.
-
Dynamic Graph Representation Learning via Self-Attention Networks
Authors:
Aravind Sankar,
Yanhong Wu,
Liang Gou,
Wei Zhang,
Hao Yang
Abstract:
Learning latent representations of nodes in graphs is an important and ubiquitous task with widespread applications such as link prediction, node classification, and graph visualization. Previous methods on graph representation learning mainly focus on static graphs, however, many real-world graphs are dynamic and evolve over time. In this paper, we present Dynamic Self-Attention Network (DySAT),…
▽ More
Learning latent representations of nodes in graphs is an important and ubiquitous task with widespread applications such as link prediction, node classification, and graph visualization. Previous methods on graph representation learning mainly focus on static graphs, however, many real-world graphs are dynamic and evolve over time. In this paper, we present Dynamic Self-Attention Network (DySAT), a novel neural architecture that operates on dynamic graphs and learns node representations that capture both structural properties and temporal evolutionary patterns. Specifically, DySAT computes node representations by jointly employing self-attention layers along two dimensions: structural neighborhood and temporal dynamics. We conduct link prediction experiments on two classes of graphs: communication networks and bipartite rating networks. Our experimental results show that DySAT has a significant performance gain over several different state-of-the-art graph embedding baselines.
△ Less
Submitted 15 June, 2019; v1 submitted 21 December, 2018;
originally announced December 2018.
-
Two-dimensional Ca-Cl crystals under ambient conditions observed directly by cryo-electron microscopy
Authors:
Lei Zhang,
Guosheng Shi,
Bingquan Peng,
Pengfei Gao,
Ni Zhong,
Liuhua Mu,
Han Han,
Liang Chen,
Lijuan Zhang,
Peng Zhang,
Lu Gou,
Yimin Zhao,
Shanshan Liang,
Chungang Duan,
Long Yan,
Shengli Zhang,
Haiping Fang
Abstract:
Recently, we report the direct observation, under ambient conditions, of Na2Cl and Na3Cl as two-dimensional (2D) Na-Cl crystals, together with regular NaCl, on reduced graphene oxide membranes and on the surfaces of natural graphite powders from salt solutions far below the saturated concentration. However, what are these abnormal stoichiometries for high valence ions, such as calcium ions and cop…
▽ More
Recently, we report the direct observation, under ambient conditions, of Na2Cl and Na3Cl as two-dimensional (2D) Na-Cl crystals, together with regular NaCl, on reduced graphene oxide membranes and on the surfaces of natural graphite powders from salt solutions far below the saturated concentration. However, what are these abnormal stoichiometries for high valence ions, such as calcium ions and copper ions still remain unknown. Here, using cryo-electron microscopy, we report the direct observation of two-dimensional (2D) Ca-Cl crystals on reduced graphene oxide (rGO) membranes, in which the calcium ions are only monovalent (i.e. +1). Remarkably, metallic properties rather than insulating are displayed by those CaCl crystals. We note that such CaCl crystals are obtained by simply incubating rGO membranes in salt solutions below the saturated concentration, under ambient conditions. Theoretical studies show that the formation of those abnormal crystals is attributed to the strong cation-pi interactions of the Ca2+ ions with the aromatic rings in the graphitic surfaces. Since strong cation-pi interactions also exist between other metal ions (such as Mg2+, Fe2+, Co2+, Cu2+, Cd2+, Cr2+ and Pb2+) and graphitic surfaces, similar 2D crystals with abnormal valence state of the metal cations and corresponding abnormal properties are highly expected. The 2D crystals with monovalent calcium ions show unusual electronic properties, and can be applicated in catalyzer, hydrogen storage, high-performance conducting electrodes and sensors. These findings also produce functionalized graphene including compact "graphene-metallic CaCl-insulating CaCl2" junction that can serve as transistors down to the atomic scale, and other devices for magnetic, optical and mechanical applications.
△ Less
Submitted 18 December, 2018;
originally announced December 2018.
-
Accretion in Strong Field Gravity with eXTP
Authors:
Alessandra De Rosa,
Phil Uttley,
Lijun Gou,
Yuan Liu,
Cosimo Bambi,
Didier Barret,
Tomaso Belloni,
Emanuele Berti,
Stefano Bianchi,
Ilaria Caiazzo,
Piergiorgio Casella,
Marco Feroci,
Valeria Ferrari,
Leonardo Gualtieri,
Jeremy Heyl,
Adam Ingram,
Vladimir Karas,
Fangjun Lu,
Bin Luo,
Giorgio Matt,
Sara Motta,
Joseph Neilsen,
Paolo Pani,
Andrea Santangelo,
Xinwen Shu
, et al. (77 additional authors not shown)
Abstract:
In this paper we describe the potential of the enhanced X-ray Timing and Polarimetry (eXTP) mission for studies related to accretion flows in the strong field gravity regime around both stellar-mass and supermassive black-holes. eXTP has the unique capability of using advanced 'spectral-timing-polarimetry' techniques to analyze the rapid variations with three orthogonal diagnostics of the flow and…
▽ More
In this paper we describe the potential of the enhanced X-ray Timing and Polarimetry (eXTP) mission for studies related to accretion flows in the strong field gravity regime around both stellar-mass and supermassive black-holes. eXTP has the unique capability of using advanced 'spectral-timing-polarimetry' techniques to analyze the rapid variations with three orthogonal diagnostics of the flow and its geometry, yielding unprecedented insight into the inner accreting regions, the effects of strong field gravity on the material within them and the powerful outflows which are driven by the accretion process.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.