-
Numerical study on performance of perforated breakwater for green water
Authors:
Rubens Augusto Amaro Junior,
Liang-Yee Cheng,
Stella Vieira Rosa
Abstract:
In this work, the influence of the geometry of lightweight perforated breakwaters on their performance against green water impact loads is investigated systematically through a series of numerical simulations. For this purpose, a fully Lagrangian meshfree particle-based method is adopted to model transient and impulsive hydrodynamic phenomenon with free surface and complex geometry. The green wate…
▽ More
In this work, the influence of the geometry of lightweight perforated breakwaters on their performance against green water impact loads is investigated systematically through a series of numerical simulations. For this purpose, a fully Lagrangian meshfree particle-based method is adopted to model transient and impulsive hydrodynamic phenomenon with free surface and complex geometry. The green water flow is represented by a dam-break problem; the breakwater is modeled as a perforated plate and the protected installation as a vertical wall. Computed impact force, moment, and impulse on the breakwater and protected wall show nonlinear effects, and the main geometric parameter is the open-area ratio. In addition, the increase in the breakwater height is effective only for low open-area ratios. The influence of the arrangement of the holes are also investigated. Different flow patterns are obtained for small and large gaps between the breakwater and the wall. The relation between the loads on the breakwater and the wall also provides the basis for the optimal design of the breakwater, considering the tolerant hydrodynamic loads of protected structures.
△ Less
Submitted 2 June, 2023;
originally announced June 2023.
-
Quantum catalysis in cavity quantum electrodynamics
Authors:
A. de Oliveira Junior,
Martí Perarnau-Llobet,
Nicolas Brunner,
Patryk Lipka-Bartosik
Abstract:
Catalysis plays a key role in many scientific areas, most notably in chemistry and biology. Here we present a catalytic process in a paradigmatic quantum optics setup, namely the Jaynes-Cummings model, where an atom interacts with an optical cavity. The atom plays the role of the catalyst, and allows for the deterministic generation of non-classical light in the cavity. Considering a cavity prepar…
▽ More
Catalysis plays a key role in many scientific areas, most notably in chemistry and biology. Here we present a catalytic process in a paradigmatic quantum optics setup, namely the Jaynes-Cummings model, where an atom interacts with an optical cavity. The atom plays the role of the catalyst, and allows for the deterministic generation of non-classical light in the cavity. Considering a cavity prepared in a ``classical'' coherent state, and choosing appropriately the atomic state and the interaction time, we obtain an evolution with the following properties. First, the state of the cavity has been modified, and now features non-classicality, as witnessed by sub-Poissonian statistics or Wigner negativity. Second, the process is catalytic, in the sense that the atom is deterministically returned to its initial state exactly, and can be re-used multiple times. What is more, we also show that our findings are robust under dissipation and can be applied to scenarios featuring cavity loss and atomic decay. Finally, we investigate the mechanism of this catalytic process, in particular highlighting the key role of correlations and quantum coherence.
△ Less
Submitted 14 May, 2024; v1 submitted 30 May, 2023;
originally announced May 2023.
-
Evaluating OpenAI's Whisper ASR for Punctuation Prediction and Topic Modeling of life histories of the Museum of the Person
Authors:
Lucas Rafael Stefanel Gris,
Ricardo Marcacini,
Arnaldo Candido Junior,
Edresson Casanova,
Anderson Soares,
Sandra Maria Aluísio
Abstract:
Automatic speech recognition (ASR) systems play a key role in applications involving human-machine interactions. Despite their importance, ASR models for the Portuguese language proposed in the last decade have limitations in relation to the correct identification of punctuation marks in automatic transcriptions, which hinder the use of transcriptions by other systems, models, and even by humans.…
▽ More
Automatic speech recognition (ASR) systems play a key role in applications involving human-machine interactions. Despite their importance, ASR models for the Portuguese language proposed in the last decade have limitations in relation to the correct identification of punctuation marks in automatic transcriptions, which hinder the use of transcriptions by other systems, models, and even by humans. However, recently Whisper ASR was proposed by OpenAI, a general-purpose speech recognition model that has generated great expectations in dealing with such limitations. This chapter presents the first study on the performance of Whisper for punctuation prediction in the Portuguese language. We present an experimental evaluation considering both theoretical aspects involving pausing points (comma) and complete ideas (exclamation, question, and fullstop), as well as practical aspects involving transcript-based topic modeling - an application dependent on punctuation marks for promising performance. We analyzed experimental results from videos of Museum of the Person, a virtual museum that aims to tell and preserve people's life histories, thus discussing the pros and cons of Whisper in a real-world scenario. Although our experiments indicate that Whisper achieves state-of-the-art results, we conclude that some punctuation marks require improvements, such as exclamation, semicolon and colon.
△ Less
Submitted 26 May, 2023; v1 submitted 23 May, 2023;
originally announced May 2023.
-
Unveiling the CO2 Adsorption Capabilities of Biphenylene Network Monolayers through DFT Calculations
Authors:
K. A. Lopes Lima,
L. A. Ribeiro Junior
Abstract:
Nanomaterial synthesis and characterization advancements have led to the discovery of new carbon allotropes, such as the biphenylene network (BPN). BPN consists of four-, six-, and eight-membered rings of sp2-hybridized carbon atoms. Here, we employ density functional theory (DFT) calculations to investigate the CO2 adsorption capabilities in pristine and vacancy-endowed BPN monolayers. Our findin…
▽ More
Nanomaterial synthesis and characterization advancements have led to the discovery of new carbon allotropes, such as the biphenylene network (BPN). BPN consists of four-, six-, and eight-membered rings of sp2-hybridized carbon atoms. Here, we employ density functional theory (DFT) calculations to investigate the CO2 adsorption capabilities in pristine and vacancy-endowed BPN monolayers. Our findings indicate that BPN lattices with a single-atom vacancy exhibit higher CO2 adsorption energies than pristine BPN. Unlike other 2D carbon allotropes, BPN does not exhibit precise CO2 sensing and selectivity by altering its band structure configuration. In pristine lattices, CO2 molecules are physisorbed in the eight-membered rings, while defective regions of vacancy-endowed lattices enable chemisorption of CO2. Regarding CO2 physisorption, the recovery time values are minimal, suggesting a rapid interaction between BPN and this molecule, with negligible relaxation time required to alter the electronic properties of BPN lattices.
△ Less
Submitted 19 May, 2023;
originally announced May 2023.
-
Computer Vision-Aided Intelligent Monitoring of Coffee: Towards Sustainable Coffee Production
Authors:
Francisco Eron,
Muhammad Noman,
Raphael Ricon de Oliveira,
Deigo de Souza Marques,
Rafael Serapilha Durelli,
Andre Pimenta Freire,
Antonio Chalfun Junior
Abstract:
Coffee which is prepared from the grinded roasted seeds of harvested coffee cherries, is one of the most consumed beverage and traded commodity, globally. To manually monitor the coffee field regularly, and inform about plant and soil health, as well as estimate yield and harvesting time, is labor-intensive, time-consuming and error-prone. Some recent studies have developed sensors for estimating…
▽ More
Coffee which is prepared from the grinded roasted seeds of harvested coffee cherries, is one of the most consumed beverage and traded commodity, globally. To manually monitor the coffee field regularly, and inform about plant and soil health, as well as estimate yield and harvesting time, is labor-intensive, time-consuming and error-prone. Some recent studies have developed sensors for estimating coffee yield at the time of harvest, however a more inclusive and applicable technology to remotely monitor multiple parameters of the field and estimate coffee yield and quality even at pre-harvest stage, was missing. Following precision agriculture approach, we employed machine learning algorithm YOLO, for image processing of coffee plant. In this study, the latest version of the state-of-the-art algorithm YOLOv7 was trained with 324 annotated images followed by its evaluation with 82 unannotated images as test data. Next, as an innovative approach for annotating the training data, we trained K-means models which led to machine-generated color classes of coffee fruit and could thus characterize the informed objects in the image. Finally, we attempted to develop an AI-based handy mobile application which would not only efficiently predict harvest time, estimate coffee yield and quality, but also inform about plant health. Resultantly, the developed model efficiently analyzed the test data with a mean average precision of 0.89. Strikingly, our innovative semi-supervised method with an mean average precision of 0.77 for multi-class mode surpassed the supervised method with mean average precision of only 0.60, leading to faster and more accurate annotation. The mobile application we designed based on the developed code, was named CoffeApp, which possesses multiple features of analyzing fruit from the image taken by phone camera with in field and can thus track fruit ripening in real time.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
A visão da BBChain sobre o contexto tecnológico subjacente à adoção do Real Digital
Authors:
Marcio G B de Avellar,
Alexandre A S Junior,
André H G Lopes,
André L S Carneiro,
João A Pereira,
Davi C B D da Cunha
Abstract:
We explore confidential computing in the context of CBDCs using Microsoft's CCF framework as an example. By developing an experiment and comparing different approaches and performance and security metrics, we seek to evaluate the effectiveness of confidential computing to improve the privacy, security, and performance of CBDCs. Preliminary results suggest that confidential computing could be a pro…
▽ More
We explore confidential computing in the context of CBDCs using Microsoft's CCF framework as an example. By developing an experiment and comparing different approaches and performance and security metrics, we seek to evaluate the effectiveness of confidential computing to improve the privacy, security, and performance of CBDCs. Preliminary results suggest that confidential computing could be a promising solution to the technological challenges faced by CBDCs. Furthermore, by implementing confidential computing in DLTs such as Hyperledger Besu and utilizing frameworks such as CCF, we increase transaction confidentiality and privacy while maintaining the scalability and interoperability required for a global digital financial system. In conclusion, confidential computing can significantly bolster CBDC development, fostering a secure, private, and efficient financial future.
--
Exploramos o uso da computação confidencial no contexto das CBDCs utilizando o framework CCF da Microsoft como exemplo. Via desenvolvimento de experimentos e comparação de diferentes abordagens e métricas de desempenho e segurança, buscamos avaliar a eficácia da computação confidencial para melhorar a privacidade, segurança e desempenho das CBDCs. Resultados preliminares sugerem que a computação confidencial pode ser uma solução promissora para os desafios tecnológicos enfrentados pelas CBDCs. Ao implementar a computação confidencial em DLTs, como o Hyperledger Besu, e utilizar frameworks como o CCF, aumentamos a confidencialidade e a privacidade das transações, mantendo a escalabilidade e a interoperabilidade necessárias para um sistema financeiro global e digital. Em conclusão, a computação confidencial pode reforçar significativamente o desenvolvimento do CBDC, promovendo um futuro financeiro seguro, privado e eficiente.
△ Less
Submitted 10 April, 2023;
originally announced April 2023.
-
3D WC-MPS coupled with geometrically nonlinear shell for hydro-elastic free-surface flows
Authors:
Rubens Augusto Amaro Junior,
Alfredo Gay Neto,
Liang-Yee Cheng
Abstract:
A 3D fluid-structure interaction solver based on an improved weakly-compressible moving particle simulation (WC-MPS) method and a geometrically nonlinear shell structural model is developed and applied to hydro-elastic free-surface flows. The fluid-structure coupling is performed by a polygon wall boundary model that can handle particles and finite elements of distinct sizes. In WC-MPS, a tuning-f…
▽ More
A 3D fluid-structure interaction solver based on an improved weakly-compressible moving particle simulation (WC-MPS) method and a geometrically nonlinear shell structural model is developed and applied to hydro-elastic free-surface flows. The fluid-structure coupling is performed by a polygon wall boundary model that can handle particles and finite elements of distinct sizes. In WC-MPS, a tuning-free diffusive term is introduced to the continuity equation to mitigate non-physical pressure oscillations. Discrete divergence operators are derived and applied to the polygon wall boundary, of which the numerical stability is enhanced by a repulsive Lennard-Jones force. Additionally, an efficient technique to deal with the interaction between fluid particles placed at opposite sides of zero-thickness walls is proposed. The geometrically nonlinear shell is modeled by an unstructured mesh of six-node triangular elements. Finite rotations are considered with Rodrigues parameters and a hyperelastic constitutive model is adopted. Benchmark examples involving free-surface flows and thin-walled structures demonstrate that the proposed model is robust, numerically stable and offers more efficient computation by allowing mesh size larger than that of fluid particles.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
Thermal recall: Memory-assisted Markovian thermal processes
Authors:
Jakub Czartowski,
A. de Oliveira Junior,
Kamil Korzekwa
Abstract:
We develop a resource-theoretic framework that allows one to bridge the gap between two approaches to quantum thermodynamics based on Markovian thermal processes (which model memoryless dynamics) and thermal operations (which model arbitrarily non-Markovian dynamics). Our approach is built on the notion of memory-assisted Markovian thermal processes, where memoryless thermodynamic processes are pr…
▽ More
We develop a resource-theoretic framework that allows one to bridge the gap between two approaches to quantum thermodynamics based on Markovian thermal processes (which model memoryless dynamics) and thermal operations (which model arbitrarily non-Markovian dynamics). Our approach is built on the notion of memory-assisted Markovian thermal processes, where memoryless thermodynamic processes are promoted to non-Markovianity by explicitly modelling ancillary memory systems initialised in thermal equilibrium states. Within this setting, we propose a family of protocols composed of sequences of elementary two-level thermalisations that approximate all transitions between energy-incoherent states accessible via thermal operations. We prove that, as the size of the memory increases, these approximations become arbitrarily good for all transitions in the infinite temperature limit, and for a subset of transitions in the finite temperature regime. Furthermore, we present solid numerical evidence for the convergence of our protocol to any transition at finite temperatures. We also explain how our framework can be used to quantify the role played by memory effects in thermodynamic protocols such as work extraction. Finally, our results show that elementary control over two energy levels at a given time is sufficient to generate all energy-incoherent transitions accessible via thermal operations if one allows for ancillary thermal systems.
△ Less
Submitted 7 October, 2023; v1 submitted 22 March, 2023;
originally announced March 2023.
-
Exploring the Elastic Properties and Fracture Patterns of Me-Graphene Monolayers and Nanotubes through Reactive Molecular Dynamics Simulations
Authors:
Marcelo L. Pereira Junior,
José. M. De Sousa,
Wjefferson H. S. Brandão,
Douglas. S. Galvão,
Alexandre F. Fonseca,
Luiz A. Ribeiro Junior
Abstract:
Me-graphene (MeG) is a novel two-dimensional (2D) carbon allotrope. Due to its attractive electronic and structural properties, it is important to study the mechanical behavior of MeG in its monolayer and nanotube topologies. In this work, we conducted fully atomistic reactive molecular dynamics simulations using the Tersoff force field to investigate their mechanical properties and fracture patte…
▽ More
Me-graphene (MeG) is a novel two-dimensional (2D) carbon allotrope. Due to its attractive electronic and structural properties, it is important to study the mechanical behavior of MeG in its monolayer and nanotube topologies. In this work, we conducted fully atomistic reactive molecular dynamics simulations using the Tersoff force field to investigate their mechanical properties and fracture patterns. Our results indicate that Young's modulus of MeG monolayers is about 414 GPa and in the range of 421-483 GPa for the nanotubes investigated here. MeG monolayers and MeGNTs directly undergo from elastic to complete fracture under critical strain without a plastic regime.
△ Less
Submitted 23 October, 2023; v1 submitted 13 March, 2023;
originally announced March 2023.
-
First-Principles and Reactive Molecular Dynamics Study of the Elastic Properties of Pentahexoctite-based Nanotubes
Authors:
W. H. S. Brandão,
J. M. De Sousa,
A. L. Aguiar,
D. S. Galvão,
L. A. Ribeiro Junior,
Alexandre F. Fonseca
Abstract:
Pentahexoctite (PH) is a pure sp$^2$ hybridized planar carbon allotrope whose structure consists of a symmetric combination of pentagons, hexagons, and octagons. The proposed PH structure was shown to be an intrinsically metallic material exhibiting good mechanical and thermal stability. PH nanotubes (PHNTs) have also been proposed, and their properties were obtained from first principles calculat…
▽ More
Pentahexoctite (PH) is a pure sp$^2$ hybridized planar carbon allotrope whose structure consists of a symmetric combination of pentagons, hexagons, and octagons. The proposed PH structure was shown to be an intrinsically metallic material exhibiting good mechanical and thermal stability. PH nanotubes (PHNTs) have also been proposed, and their properties were obtained from first principles calculations. Here, we carried out fully-atomistic simulations, combining reactive (ReaxFF) molecular dynamics (MD) and density functional theory (DFT) methods, to study the PHNTs elastic properties and fracture patterns. We have investigated the mechanical properties behavior as a function of the tube diameter and temperature regimes. Our results showed that the PHNTs, when subjected to large tensile strains, undergo abrupt structural transitions exhibiting brittle fracture patterns without a plastic regime.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
General criteria for a strong notion of lineability
Authors:
Vinícius Vieira Fávaro,
Daniel Marinho Pellegrino,
Anselmo Baganha Raposo Júnior,
Geivison dos Santos Ribeiro
Abstract:
A subset $A$ of a vector space $X$ is called $α$-lineable whenever $A$ contains, except for the null vector, a subspace of dimension $α$. If $X$ has a topology, then $A$ is $α$-spaceable if such subspace can be chosen to be closed. The vast existing literature on these topics has shown that positive results for lineability and spaceability are quite common. Recently, the stricter notions of…
▽ More
A subset $A$ of a vector space $X$ is called $α$-lineable whenever $A$ contains, except for the null vector, a subspace of dimension $α$. If $X$ has a topology, then $A$ is $α$-spaceable if such subspace can be chosen to be closed. The vast existing literature on these topics has shown that positive results for lineability and spaceability are quite common. Recently, the stricter notions of $\left( α,β\right) $% -lineability/spaceability were introduced as an attempt to shed light to more subtle issues. In this paper, among other results, we prove some general criteria for the notion of $\left( α,β\right) $-spaceability and, as applications, we extend recent results of different authors.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Casimir effect, loop corrections and topological mass generation for interacting real and complex scalar fields in Minkowski spacetime with different conditions
Authors:
A. J. D. Farias Junior,
Herondy F. Santana Mota
Abstract:
In this paper the Casimir energy density, loop corrections, and generation of topological mass are investigated for a system consisting of two interacting real and complex scalar fields. The interaction considered is the quartic interaction in the form of a product of the modulus square of the complex field and the square of the real field. In addition, it is also considered the self-interaction a…
▽ More
In this paper the Casimir energy density, loop corrections, and generation of topological mass are investigated for a system consisting of two interacting real and complex scalar fields. The interaction considered is the quartic interaction in the form of a product of the modulus square of the complex field and the square of the real field. In addition, it is also considered the self-interaction associated with each field. In this theory, the scalar field is constrained to always obey periodic condition while the complex field obeys in one case a quasiperiodic condition and in other case mixed boundary conditions. The Casimir energy density, loop corrections, and topological mass are evaluated analytically for the massive and massless scalar fields considered. An analysis of possible different stable vacuum states and the corresponding stability condition is also provided. In order to better understand our investigation, some graphs are also presented. The formalism we use here to perform such investigation is the effective potential, which is written as loop expansions via path integral in quantum field theory.
△ Less
Submitted 25 May, 2023; v1 submitted 28 February, 2023;
originally announced February 2023.
-
On the Mechanical, Electronic, and Optical Properties of 8-16-4 Graphyne: A 2D Carbon Allotrope with Dirac Cones
Authors:
Raphael M. Tromer,
Marcelo L. Pereira Junior,
Kleuton A. L. Lima,
Alexandre F. Fonseca,
Luciano R. da Silva,
Douglas S. Galvao,
Luiz A. Ribeiro Junior
Abstract:
Due to the success achieved by graphene, several 2D carbon-based allotropes were theoretically predicted and experimentally synthesized. We used density functional theory and reactive molecular dynamics simulations to investigate the mechanical, structural, electronic, and optical properties of 8-16-4 Graphyne. The results showed that this material exhibits good dynamical and thermal stabilities.…
▽ More
Due to the success achieved by graphene, several 2D carbon-based allotropes were theoretically predicted and experimentally synthesized. We used density functional theory and reactive molecular dynamics simulations to investigate the mechanical, structural, electronic, and optical properties of 8-16-4 Graphyne. The results showed that this material exhibits good dynamical and thermal stabilities. Its formation energy and elastic moduli are -8.57 eV/atom and 262.37 GPa, respectively. This graphyne analogue is a semi-metal and presents two Dirac cones in its band structure. Moreover, it is transparent, and its intense optical activity is limited to the infrared region. Remarkably, the band structure of 8-16-4 Graphyne remains practically unchanged at even moderate strain regimes. As far as we know, this is the first 2D carbon allotrope to exhibit this behavior.
△ Less
Submitted 3 March, 2023; v1 submitted 16 February, 2023;
originally announced February 2023.
-
KdV-type equations in projective Gevrey classes
Authors:
Alexandre Arias Junior,
Alessia Ascanelli,
Marco Cappiello
Abstract:
We prove well-posedness of the Cauchy problem for a class of third order quasilinear evolution equations with variable coefficients in projective Gevrey spaces. The class considered is connected with several equations in Mathematical Physics as the KdV and KdVB equation and some of their many generalizations.
We prove well-posedness of the Cauchy problem for a class of third order quasilinear evolution equations with variable coefficients in projective Gevrey spaces. The class considered is connected with several equations in Mathematical Physics as the KdV and KdVB equation and some of their many generalizations.
△ Less
Submitted 20 December, 2022;
originally announced December 2022.
-
Interpretability Analysis of Deep Models for COVID-19 Detection
Authors:
Daniel Peixoto Pinto da Silva,
Edresson Casanova,
Lucas Rafael Stefanel Gris,
Arnaldo Candido Junior,
Marcelo Finger,
Flaviane Svartman,
Beatriz Raposo,
Marcus Vinícius Moreira Martins,
Sandra Maria Aluísio,
Larissa Cristina Berti,
João Paulo Teixeira
Abstract:
During the outbreak of COVID-19 pandemic, several research areas joined efforts to mitigate the damages caused by SARS-CoV-2. In this paper we present an interpretability analysis of a convolutional neural network based model for COVID-19 detection in audios. We investigate which features are important for model decision process, investigating spectrograms, F0, F0 standard deviation, sex and age.…
▽ More
During the outbreak of COVID-19 pandemic, several research areas joined efforts to mitigate the damages caused by SARS-CoV-2. In this paper we present an interpretability analysis of a convolutional neural network based model for COVID-19 detection in audios. We investigate which features are important for model decision process, investigating spectrograms, F0, F0 standard deviation, sex and age. Following, we analyse model decisions by generating heat maps for the trained models to capture their attention during the decision process. Focusing on a explainable Inteligence Artificial approach, we show that studied models can taken unbiased decisions even in the presence of spurious data in the training set, given the adequate preprocessing steps. Our best model has 94.44% of accuracy in detection, with results indicating that models favors spectrograms for the decision process, particularly, high energy areas in the spectrogram related to prosodic domains, while F0 also leads to efficient COVID-19 detection.
△ Less
Submitted 25 November, 2022;
originally announced November 2022.
-
Quantum Biochemical Analysis of the TtgR Regulator and Effectors
Authors:
E. G. C. Matias,
K. S. Bezerra,
A. H. Lima Costa,
W. S. Clemente,
J. I. N. Oliveira,
L. A. Ribeiro Junior,
D. S. Galvao,
U. L. Fulco
Abstract:
The recent expansion of multidrug-resistant (MDR) pathogens poses significant challenges in treating healthcare-associated infections. Although antibacterial resistance occurs by numerous mechanisms, active efflux of the drugs is a critical concern. A single species of efflux pump can produce a simultaneous resistance to several drugs. One of the best-studied efflux pumps is the TtgABC: a triparti…
▽ More
The recent expansion of multidrug-resistant (MDR) pathogens poses significant challenges in treating healthcare-associated infections. Although antibacterial resistance occurs by numerous mechanisms, active efflux of the drugs is a critical concern. A single species of efflux pump can produce a simultaneous resistance to several drugs. One of the best-studied efflux pumps is the TtgABC: a tripartite resistance-nodulation-division (RND) efflux pump implicated in the intrinsic antibiotic resistance in Pseudomonas putida DOT-T1E. The expression of the TtgABC gene is down-regulated by the HTH-type transcriptional repressor TtgR. In this context, by employing quantum chemistry methods based on the Density Functional Theory (DFT) within the Molecular Fragmentation with Conjugate Caps (MFCC) approach, we investigate the coupling profiles of the transcriptional regulator TtgR in complex with quercetin (QUE), a natural polyphenolic flavonoid, tetracycline (TAC), and chloramphenicol (CLM), two broad-spectrum antimicrobial agents. Our quantum biochemical computational results show the: [i] convergence radius, [ii] total binding energy, [iii] relevance (energetically) of the ligands regions, and [iv] most relevant amino acids residues of the TtgR-QUE/TAC/CLM complexes, pointing out distinctions and similarities among them. These findings improve the understanding of the binding mechanism of effectors and facilitate the development of new chemicals targeting TtgR, helping in the battle against the rise of resistance to antimicrobial drugs.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Bringing NURC/SP to Digital Life: the Role of Open-source Automatic Speech Recognition Models
Authors:
Lucas Rafael Stefanel Gris,
Arnaldo Candido Junior,
Vinícius G. dos Santos,
Bruno A. Papa Dias,
Marli Quadros Leite,
Flaviane Romani Fernandes Svartman,
Sandra Aluísio
Abstract:
The NURC Project that started in 1969 to study the cultured linguistic urban norm spoken in five Brazilian capitals, was responsible for compiling a large corpus for each capital. The digitized NURC/SP comprises 375 inquiries in 334 hours of recordings taken in São Paulo capital. Although 47 inquiries have transcripts, there was no alignment between the audio-transcription, and 328 inquiries were…
▽ More
The NURC Project that started in 1969 to study the cultured linguistic urban norm spoken in five Brazilian capitals, was responsible for compiling a large corpus for each capital. The digitized NURC/SP comprises 375 inquiries in 334 hours of recordings taken in São Paulo capital. Although 47 inquiries have transcripts, there was no alignment between the audio-transcription, and 328 inquiries were not transcribed. This article presents an evaluation and error analysis of three automatic speech recognition models trained with spontaneous speech in Portuguese and one model trained with prepared speech. The evaluation allowed us to choose the best model, using WER and CER metrics, in a manually aligned sample of NURC/SP, to automatically transcribe 284 hours.
△ Less
Submitted 14 October, 2022;
originally announced October 2022.
-
Persistent entanglement of valley exciton qubits in transition metal dichalcogenides integrated into a bimodal optical cavity
Authors:
Borges H. S.,
Celso A. N. Júnior,
David S. Brandão,
Fujun Liu,
V. V. R. Pereira,
S. J. Xie,
Fanyao Qu,
A. M. Alcalde
Abstract:
We report dissipative dynamics of two valley excitons residing in the $K$ and $K^\prime$-valleys of bare WSe$_2$ monolayer and the one being integrated into a bimodal optical cavity. In the former, only when the exciton-field detunings in the $K$ and $K^\prime$-valleys are rigorously equal (resonant detuning), partially entangled stationary states can be created. Otherwise the concurrence of excit…
▽ More
We report dissipative dynamics of two valley excitons residing in the $K$ and $K^\prime$-valleys of bare WSe$_2$ monolayer and the one being integrated into a bimodal optical cavity. In the former, only when the exciton-field detunings in the $K$ and $K^\prime$-valleys are rigorously equal (resonant detuning), partially entangled stationary states can be created. Otherwise the concurrence of exciton qubits turns to zero. Remarkably, in the latter (the WSe$_2$ monolayer in a bimodal optical cavity), the transfers of entanglement from one subsystem (exciton/light) to the other (light/exciton) take place. Hence a finite stationary concurrence of exciton qubits is always generated, independent of whether the exciton-field detuning in two valleys is resonant or non-resonant. In addition, it can even reach as high as 1 (maximally entangled state of two valley excitons). Since there no real system which has a strictly resonant detuning, an immersion of the WSe$_2$ monolayer in a bimodal optical cavity provides an opportunity to overcome the challenge facing by the bare WSe$_2$, opening a novel realm of potential qubits.
△ Less
Submitted 9 September, 2022;
originally announced September 2022.
-
Generalizing intrusion detection for heterogeneous networks: A stacked-unsupervised federated learning approach
Authors:
Gustavo de Carvalho Bertoli,
Lourenço Alves Pereira Junior,
Aldri Luiz dos Santos,
Osamu Saotome
Abstract:
The constantly evolving digital transformation imposes new requirements on our society. Aspects relating to reliance on the networking domain and the difficulty of achieving security by design pose a challenge today. As a result, data-centric and machine-learning approaches arose as feasible solutions for securing large networks. Although, in the network security domain, ML-based solutions face a…
▽ More
The constantly evolving digital transformation imposes new requirements on our society. Aspects relating to reliance on the networking domain and the difficulty of achieving security by design pose a challenge today. As a result, data-centric and machine-learning approaches arose as feasible solutions for securing large networks. Although, in the network security domain, ML-based solutions face a challenge regarding the capability to generalize between different contexts. In other words, solutions based on specific network data usually do not perform satisfactorily on other networks. This paper describes the stacked-unsupervised federated learning (FL) approach to generalize on a cross-silo configuration for a flow-based network intrusion detection system (NIDS). The proposed approach we have examined comprises a deep autoencoder in conjunction with an energy flow classifier in an ensemble learning task. Our approach performs better than traditional local learning and naive cross-evaluation (training in one context and testing on another network data). Remarkably, the proposed approach demonstrates a sound performance in the case of non-iid data silos. In conjunction with an informative feature in an ensemble architecture for unsupervised learning, we advise that the proposed FL-based NIDS results in a feasible approach for generalization between heterogeneous networks. To the best of our knowledge, our proposal is the first successful approach to applying unsupervised FL on the problem of network intrusion detection generalization using flow-based data.
△ Less
Submitted 28 November, 2022; v1 submitted 1 September, 2022;
originally announced September 2022.
-
2D Porphyrazine: A New Nanoporous Material
Authors:
R. M. Tromer,
M. L. Pereira Junior,
L. A. Ribeiro Junior,
D. S. Galvão
Abstract:
Crystalline microporous materials are solids formed by interconnected pores of less than 2 nm in size. Typically, they possess large surface areas desirable for versatile applications such as catalysis, gas adsorption, and energy storage. In the present work, we propose a new porphyrin-based 2D nanoporous crystal, named 2D Porphyrazine (2DP), which is formed by topological assembling H$_{5}$C…
▽ More
Crystalline microporous materials are solids formed by interconnected pores of less than 2 nm in size. Typically, they possess large surface areas desirable for versatile applications such as catalysis, gas adsorption, and energy storage. In the present work, we propose a new porphyrin-based 2D nanoporous crystal, named 2D Porphyrazine (2DP), which is formed by topological assembling H$_{5}$C$_{13}$N$_{4}$ porphyrins. We have considered its monolayer, bi-layer, and molecular crystal (bulk) arrangements. We carried out DFT calculations to investigate 2DP structural and electronic properties. Results show that 2DP is a very stable structure with a direct bandgap of 0.65 eV and significant optical absorption in the visible range. 2DP exhibited satisfactory affinity to lithium atoms. Simulations also showed the existence of proton transfer between nitrogen atoms. It is the first report on the site-specific hydrogen exchange process in 2D crystals.
△ Less
Submitted 23 August, 2022;
originally announced August 2022.
-
Irida-Graphene: A New 2D Carbon Allotrope
Authors:
M. L. Pereira Junior,
W. F. da Cunha,
W. F. Giozza,
R. T. de Sousa Junior,
L. A. Ribeiro Junior
Abstract:
Several 2D carbon-based materials have been computationally designed in the last years due to the success achieved by graphene. Here, we propose a new 2D all-sp$^2$ carbon allotrope, named Irida-Graphene (IG), using a bottom-up approach. IG is composed of fused rings containing 3-6-8 carbon atoms. We employed density functional theory calculations and reactive (ReaxFF) molecular dynamics simulatio…
▽ More
Several 2D carbon-based materials have been computationally designed in the last years due to the success achieved by graphene. Here, we propose a new 2D all-sp$^2$ carbon allotrope, named Irida-Graphene (IG), using a bottom-up approach. IG is composed of fused rings containing 3-6-8 carbon atoms. We employed density functional theory calculations and reactive (ReaxFF) molecular dynamics simulations to examine its mechanical, structural, electronic, and optical properties. Results showed that IG exhibits good dynamical and thermal stabilities. Its estimated elastic modulus varies between 80-113 GPa. IG is a metallic material and presents a Dirac cone above the Fermi level in the center of the band. The intense optical activity of IG is restricted to the infrared and violet regions. IG can act as a violet collector for photon energies of about 3.0 eV since it presents very low reflectivity and refractive index greater than one.
△ Less
Submitted 18 August, 2022;
originally announced August 2022.
-
Dynamical Formation of Graphene and Graphane Nanoscrolls
Authors:
M. L. Pereira Júnior,
L. A. Ribeiro Júnior,
D. S. Galvão,
J. M. De Sousa
Abstract:
Carbon nanoscrolls (CNSs) are nanomaterials with geometry resembling graphene layers rolled up into a spiral (papyrus-like) form. Effects of hydrogenation and temperature on the self-scrolling process of two nanoribbons interacting with a carbon nanotube (CNT) have been studied by molecular dynamics simulations for three configurations: (1) graphene/graphene/CNT; (2) graphene/graphane/CNT, and (3)…
▽ More
Carbon nanoscrolls (CNSs) are nanomaterials with geometry resembling graphene layers rolled up into a spiral (papyrus-like) form. Effects of hydrogenation and temperature on the self-scrolling process of two nanoribbons interacting with a carbon nanotube (CNT) have been studied by molecular dynamics simulations for three configurations: (1) graphene/graphene/CNT; (2) graphene/graphane/CNT, and (3) graphane/graphane/CNT. Graphane refers to a fully hydrogenated graphene nanoribbon. Nanoscroll formation is observed for configurations (1) and (2) for temperatures 300-1000 K, while nanoribbons wrap CNT without nanoscroll formation for configuration (3).
△ Less
Submitted 30 July, 2022;
originally announced August 2022.
-
Thermal Stability and Fracture Patterns of a Recently Synthesized Monolayer Fullerene Network: A Reactive Molecular Dynamics Study
Authors:
L. A. Ribeiro Junior,
M. L. Pereira Júnior,
W. F. Giozza,
R. M. Tromer,
D. S. Galvão
Abstract:
New monolayer 2D carbon structures, namely qHPC60 and qTPC60, were recently synthesized by covalently bonding C60 polymers. Here, we carried out Reactive (ReaxFF) molecular dynamics simulations to study the thermodynamic stability and fracture patterns of qHPC60 and qTPC60. Our results showed that these structures present similar thermal stability, with sublimation points of 3898K and 3965K, respe…
▽ More
New monolayer 2D carbon structures, namely qHPC60 and qTPC60, were recently synthesized by covalently bonding C60 polymers. Here, we carried out Reactive (ReaxFF) molecular dynamics simulations to study the thermodynamic stability and fracture patterns of qHPC60 and qTPC60. Our results showed that these structures present similar thermal stability, with sublimation points of 3898K and 3965K, respectively. qHPC60 and qTPC60 undergo an abrupt structural transition becoming totally fractured after a critical strain threshold. The crack propagation is linear (non-linear) for qHPC60 (qTPC60). The estimated elastic modulus for qHPC60 and qTPC60 are 175.9 GPa and 100.7 GPa, respectively.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
A Computational Study On the Mechanical Properties of Pentahexoctite Single-layer: Combining DFT and Classical Molecular Dynamics Simulations
Authors:
W. H. S. Brandão,
A. L. Aguiar,
L. A. Ribeiro Júnior,
D. S. Galvão,
J. M. De Sousa
Abstract:
Studies aimed at designing new allotropic forms of carbon have received much attention. Recently, a new 2D graphene-like allotrope named Pentahexoctite was theoretically proposed. Pentahexoctite has a metallic signature, and its structure consists of continuous 5-6-8 rings of carbon atoms with sp2 hybridization. Here, we carried out fully-atomistic computational simulations, combining reactive (Re…
▽ More
Studies aimed at designing new allotropic forms of carbon have received much attention. Recently, a new 2D graphene-like allotrope named Pentahexoctite was theoretically proposed. Pentahexoctite has a metallic signature, and its structure consists of continuous 5-6-8 rings of carbon atoms with sp2 hybridization. Here, we carried out fully-atomistic computational simulations, combining reactive (ReaxFF) molecular dynamics (MD) and density functional theory (DFT) methods, to study the elastic properties and fracture patterns of Pentahexoctite monolayer. Results revealed a Young's Modulus of 0.74 TPa, smaller than the graphene one (about 1.0 TPa). The Pentahexoctite monolayer, when subjected to a critical strain, goes directly from elastic to completely fractured regimes. This process occurs with no plasticity stages between these two regimes. Importantly, graphene presents a similar fracture process. The elastic properties calculated with both DFT and MD are in good agreement. Keywords: Reactive Molecular Dynamics, DFT, Mechanical Properties, Carbon Allotrope,
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
Mathematical analysis and numerical simulation of the Guyer-Krumhansl heat equation
Authors:
Anderson Ramos,
Róbert Kovács,
Mirelson Freitas,
Almeida Júnior
Abstract:
The Guyer-Krumhansl heat equation has numerous important practical applications in both low-temperature and room temperature heat conduction problems. In recent years, it turned out that the Guyer-Krumhansl model can effectively describe the thermal behaviour of macroscale heterogeneous materials. Thus, the Guyer-Krumhansl equation is a promising candidate to be the next standard model in engineer…
▽ More
The Guyer-Krumhansl heat equation has numerous important practical applications in both low-temperature and room temperature heat conduction problems. In recent years, it turned out that the Guyer-Krumhansl model can effectively describe the thermal behaviour of macroscale heterogeneous materials. Thus, the Guyer-Krumhansl equation is a promising candidate to be the next standard model in engineering. However, to support the Guyer-Krumhansl equation's introduction into the engineering practice, its mathematical properties must be thoroughly investigated and understood. In the present paper, we show the basic structure of this particular heat equation, focusing on the differences in comparison to the Fourier heat equation {obtained when $(τ_{q}, μ^{2})\rightarrow (0,0)$}. Additionally, we prove the well-posedness of a particular, practically significant initial and boundary value problem. The stability of the solution is also investigated in the discrete space using a finite difference approach.
△ Less
Submitted 13 July, 2022; v1 submitted 12 July, 2022;
originally announced July 2022.
-
Geometric structure of thermal cones
Authors:
A. de Oliveira Junior,
Jakub Czartowski,
Karol Życzkowski,
Kamil Korzekwa
Abstract:
The second law of thermodynamics imposes a fundamental asymmetry in the flow of events. The so-called thermodynamic arrow of time introduces an ordering that divides the system's state space into past, future and incomparable regions. In this work, we analyse the structure of the resulting thermal cones, i.e., sets of states that a given state can thermodynamically evolve to (the future thermal co…
▽ More
The second law of thermodynamics imposes a fundamental asymmetry in the flow of events. The so-called thermodynamic arrow of time introduces an ordering that divides the system's state space into past, future and incomparable regions. In this work, we analyse the structure of the resulting thermal cones, i.e., sets of states that a given state can thermodynamically evolve to (the future thermal cone) or evolve from (the past thermal cone). Specifically, for a $d$-dimensional classical state of a system interacting with a heat bath, we find explicit construction of the past thermal cone and the incomparable region. Moreover, we provide a detailed analysis of their behaviour based on thermodynamic monotones given by the volumes of thermal cones. Results obtained apply also to other majorisation-based resource theories (such as that of entanglement and coherence), since the partial ordering describing allowed state transformations is then the opposite of the thermodynamic order in the infinite temperature limit. Finally, we also generalise the construction of thermal cones to account for probabilistic transformations.
△ Less
Submitted 13 December, 2022; v1 submitted 5 July, 2022;
originally announced July 2022.
-
A DFT Study of the Electronic, Optical, and Mechanical Properties of a Recently Synthesized Monolayer Fullerene Network
Authors:
Raphael M. Tromer,
Luiz A. Ribeiro Junior,
Douglas S. Galvão
Abstract:
Closely packed quasi-hexagonal and quasi-tetragonal crystalline phase of C$_{60}$ molecules (named qHPC$_{60}$) was recently synthesized. Here, we used DFT simulations to investigate the electronic, optical, and mechanical properties of qHPC$_{60}$ monolayers. qHPC$_{60}$ has a moderate direct electronic bandgap, with anisotropic mechanical properties. Their elastic modulus ranges between 50 and 6…
▽ More
Closely packed quasi-hexagonal and quasi-tetragonal crystalline phase of C$_{60}$ molecules (named qHPC$_{60}$) was recently synthesized. Here, we used DFT simulations to investigate the electronic, optical, and mechanical properties of qHPC$_{60}$ monolayers. qHPC$_{60}$ has a moderate direct electronic bandgap, with anisotropic mechanical properties. Their elastic modulus ranges between 50 and 62 GPa. The results for optical properties suggest that qHPC$_{60}$ can act as UV collectors for photon energies until 5.5 eV since they present low reflectivity and refractive index greater than one. The estimated optical bandgap (1.5-1.6 eV) is in very good agreement with the experimental one (1.6 eV).
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Large-Margin Representation Learning for Texture Classification
Authors:
Jonathan de Matos,
Luiz Eduardo Soares de Oliveira,
Alceu de Souza Britto Junior,
Alessandro Lameiras Koerich
Abstract:
This paper presents a novel approach combining convolutional layers (CLs) and large-margin metric learning for training supervised models on small datasets for texture classification. The core of such an approach is a loss function that computes the distances between instances of interest and support vectors. The objective is to update the weights of CLs iteratively to learn a representation with…
▽ More
This paper presents a novel approach combining convolutional layers (CLs) and large-margin metric learning for training supervised models on small datasets for texture classification. The core of such an approach is a loss function that computes the distances between instances of interest and support vectors. The objective is to update the weights of CLs iteratively to learn a representation with a large margin between classes. Each iteration results in a large-margin discriminant model represented by support vectors based on such a representation. The advantage of the proposed approach w.r.t. convolutional neural networks (CNNs) is two-fold. First, it allows representation learning with a small amount of data due to the reduced number of parameters compared to an equivalent CNN. Second, it has a low training cost since the backpropagation considers only support vectors. The experimental results on texture and histopathologic image datasets have shown that the proposed approach achieves competitive accuracy with lower computational cost and faster convergence when compared to equivalent CNNs.
△ Less
Submitted 17 June, 2022;
originally announced June 2022.
-
Non-Intrusive Reduced Models based on Operator Inference for Chaotic Systems
Authors:
João Lucas de Sousa Almeida,
Arthur Cancellieri Pires,
Klaus Feine Vaz Cid,
Alberto Costa Nogueira Junior
Abstract:
This work explores the physics-driven machine learning technique Operator Inference (OpInf) for predicting the state of chaotic dynamical systems. OpInf provides a non-intrusive approach to infer approximations of polynomial operators in reduced space without having access to the full order operators appearing in discretized models. Datasets for the physics systems are generated using conventional…
▽ More
This work explores the physics-driven machine learning technique Operator Inference (OpInf) for predicting the state of chaotic dynamical systems. OpInf provides a non-intrusive approach to infer approximations of polynomial operators in reduced space without having access to the full order operators appearing in discretized models. Datasets for the physics systems are generated using conventional numerical solvers and then projected to a low-dimensional space via Principal Component Analysis (PCA). In latent space, a least-squares problem is set to fit a quadratic polynomial operator, which is subsequently employed in a time-integration scheme in order to produce extrapolations in the same space. Once solved, the inverse PCA operation is applied to reconstruct the extrapolations in the original space. The quality of the OpInf predictions is assessed via the Normalized Root Mean Squared Error (NRMSE) metric from which the Valid Prediction Time (VPT) is computed. Numerical experiments considering the chaotic systems Lorenz 96 and the Kuramoto-Sivashinsky equation show promising forecasting capabilities of the OpInf reduced order models with VPT ranges that outperform state-of-the-art machine learning methods such as backpropagation and reservoir computing recurrent neural networks [1], as well as Markov neural operators [2].
△ Less
Submitted 21 September, 2022; v1 submitted 1 June, 2022;
originally announced June 2022.
-
Resource theory of Absolute Negativity
Authors:
Roberto Salazar,
Jakub Czartowski,
A. de Oliveira Junior
Abstract:
A crucial goal of quantum information is to find new ways to exploit the properties of quantum devices as resources. One of the prominent properties of quantum devices of particular interest is their negativity in quasi-probability representations, intensively studied in foundational and practical investigations. In this article, we introduce the concept of Absolute Negativity to characterise the…
▽ More
A crucial goal of quantum information is to find new ways to exploit the properties of quantum devices as resources. One of the prominent properties of quantum devices of particular interest is their negativity in quasi-probability representations, intensively studied in foundational and practical investigations. In this article, we introduce the concept of Absolute Negativity to characterise the negativity of sets of quantum devices in a basis-independent way. Moreover, we provide a resource theory for our relational notion of Absolute Negativity, which applies to sets of quantum state-measurement pairs. Additionally, we determine a complete hierarchy of upper bounds for resource measures, which allows for estimating the resources of a set of devices. We demonstrate operational interpretations of our resource theory for communication and output-estimation advantages over state-measurement pairs with a classical probability representation. Furthermore, we illustrate the newly introduced concepts with an exhaustive analysis of a simple case of four qubit state-measurement pairs. Finally, we outline possible generalisations, applications and open questions.
△ Less
Submitted 26 August, 2022; v1 submitted 26 May, 2022;
originally announced May 2022.
-
Machine learning method for return direction forecasting of Exchange Traded Funds using classification and regression models
Authors:
Raphael P. B. Piovezan,
Pedro Paulo de Andrade Junior
Abstract:
This article aims to propose and apply a machine learning method to analyze the direction of returns from Exchange Traded Funds (ETFs) using the historical return data of its components, helping to make investment strategy decisions through a trading algorithm. In methodological terms, regression and classification models were applied, using standard datasets from Brazilian and American markets, i…
▽ More
This article aims to propose and apply a machine learning method to analyze the direction of returns from Exchange Traded Funds (ETFs) using the historical return data of its components, helping to make investment strategy decisions through a trading algorithm. In methodological terms, regression and classification models were applied, using standard datasets from Brazilian and American markets, in addition to algorithmic error metrics. In terms of research results, they were analyzed and compared to those of the Naïve forecast and the returns obtained by the buy & hold technique in the same period of time. In terms of risk and return, the models mostly performed better than the control metrics, with emphasis on the linear regression model and the classification models by logistic regression, support vector machine (using the LinearSVC model), Gaussian Naive Bayes and K-Nearest Neighbors, where in certain datasets the returns exceeded by two times and the Sharpe ratio by up to four times those of the buy & hold control model.
△ Less
Submitted 13 June, 2022; v1 submitted 25 May, 2022;
originally announced May 2022.
-
Magnetism and metal-insulator transitions in the Rashba-Hubbard model
Authors:
Welberth Kennedy,
Sebastião dos Anjos Sousa Júnior,
Natanael C. Costa,
Raimundo R. dos Santos
Abstract:
The nature of metal-insulator and magnetic transitions is still a subject under intense debate in condensed matter physics. Amongst the many possible mechanisms, the interplay between electronic correlations and spin-orbit couplings is an issue of a great deal of interest, in particular when dealing with quasi-2D compounds. In view of this, here we use a Hartree-Fock approach to investigate how th…
▽ More
The nature of metal-insulator and magnetic transitions is still a subject under intense debate in condensed matter physics. Amongst the many possible mechanisms, the interplay between electronic correlations and spin-orbit couplings is an issue of a great deal of interest, in particular when dealing with quasi-2D compounds. In view of this, here we use a Hartree-Fock approach to investigate how the Rashba spin-orbit coupling, $V_\text{SO}$, affects the magnetic ordering provided by a Hubbard interaction, $U$, on a square lattice. At half-filling, we have found a sequence of transitions for increasing $V_\text{SO}$: from a Mott insulator to a metallic antiferromagnet, and then to a paramagnetic Rashba metal. Also, our results indicate that the Rashba coupling favors magnetic striped phases in the doped regime. By analyzing spectral properties, we associate the rearrangement of the magnetic ordering with the emerging chirality created by the spin-orbit coupling. Our findings provide insights towards clarifying the competition between these tendencies.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
Border mapping multi-resolution (BMMR) technique for incompressible projection-based particle methods
Authors:
Cezar Augusto Bellezi,
Liang-Yee Cheng,
Rubens Augusto Amaro Junior,
Marcio Michiharu Tsukamoto
Abstract:
A novel multi-resolution technique called border mapping multi-resolution (BMMR) is proposed for projection-based particle methods. The BMMR aims to obtain background equivalent particle distributions in the two sides of a border between sub-domains with a 2:1 resolution ratio so that a single resolution framework is adopted to near-border particles calculations. The novelty of the BMMR is that it…
▽ More
A novel multi-resolution technique called border mapping multi-resolution (BMMR) is proposed for projection-based particle methods. The BMMR aims to obtain background equivalent particle distributions in the two sides of a border between sub-domains with a 2:1 resolution ratio so that a single resolution framework is adopted to near-border particles calculations. The novelty of the BMMR is that it obtains the background grid from the mapping of the actual particle distribution in the border and, as a result, the location of the particles in the background grid exactly matches the location of the actual particles. In this way, such technique aims to reduce the error from the interpolation of the physical quantities in the background grid and to avoid sudden changes in the particle distribution that may lead to unstable local pressure calculation. In the coarse side of the border, the refinement is made by a triangulation and by placing fictitious particles in the midpoints of the triangles. In the fine side of the border, the derefinement is made by defining a set of fine particles that result in a particle distribution that best resembles a coarse one. The accuracy and computational performance of the BMMR implemented in a moving particle semi-implicit (MPS) simulation system are verified by using benchmark test cases of 2D free surface flows.
△ Less
Submitted 3 April, 2023; v1 submitted 17 May, 2022;
originally announced May 2022.
-
Loop correction to the scalar Casimir energy density and generation of topological mass due to a helix boundary condition in a scenario with Lorentz violation
Authors:
A. J. D. Farias Junior,
Herondy F. Santana Mota
Abstract:
In this paper the effective potential approach in quantum field theory is used in order to investigate self-interaction loop correction to the Casimir energy density and generation of topological mass for both massless and massive real scalar fields. It is assumed that the scalar field obeys a helix boundary condition. In addition, it is also considered a CPT-even aether-type violation of the Lore…
▽ More
In this paper the effective potential approach in quantum field theory is used in order to investigate self-interaction loop correction to the Casimir energy density and generation of topological mass for both massless and massive real scalar fields. It is assumed that the scalar field obeys a helix boundary condition. In addition, it is also considered a CPT-even aether-type violation of the Lorentz symmetry. In the absence of the Lorentz violation we obtain analytical expressions for the loop correction to the Casimir energy density and to the mass of the scalar field. The same expressions are also obtained assuming the Lorentz violation in each of the spacetime directions. We also show some graphs that exhibit how the loop correction and the Lorentz violation affect the the Casimir energy density and the mass of the scalar field.
△ Less
Submitted 17 November, 2022; v1 submitted 20 April, 2022;
originally announced April 2022.
-
ASR data augmentation in low-resource settings using cross-lingual multi-speaker TTS and cross-lingual voice conversion
Authors:
Edresson Casanova,
Christopher Shulby,
Alexander Korolev,
Arnaldo Candido Junior,
Anderson da Silva Soares,
Sandra Aluísio,
Moacir Antonelli Ponti
Abstract:
We explore cross-lingual multi-speaker speech synthesis and cross-lingual voice conversion applied to data augmentation for automatic speech recognition (ASR) systems in low/medium-resource scenarios. Through extensive experiments, we show that our approach permits the application of speech synthesis and voice conversion to improve ASR systems using only one target-language speaker during model tr…
▽ More
We explore cross-lingual multi-speaker speech synthesis and cross-lingual voice conversion applied to data augmentation for automatic speech recognition (ASR) systems in low/medium-resource scenarios. Through extensive experiments, we show that our approach permits the application of speech synthesis and voice conversion to improve ASR systems using only one target-language speaker during model training. We also managed to close the gap between ASR models trained with synthesized versus human speech compared to other works that use many speakers. Finally, we show that it is possible to obtain promising ASR training results with our data augmentation method using only a single real speaker in a target language.
△ Less
Submitted 20 May, 2023; v1 submitted 29 March, 2022;
originally announced April 2022.
-
Improving stability of moving particle semi-implicit method by source terms based on time-scale correction of particle-level impulses
Authors:
Liang-Yee Cheng,
Rubens Augusto Amaro Junior,
Eric Henrique Favero
Abstract:
The aim of this paper is to investigate the unstable nature of pressure computation focusing on incompressible flow modeling through the projection-based particle methods. A new approach from the original viewpoint of the momentum conservation regarding particle-level collisions, hereinafter refered to as time-scale correction of particle-level impulses (TCPI), is proposed to derive new source ter…
▽ More
The aim of this paper is to investigate the unstable nature of pressure computation focusing on incompressible flow modeling through the projection-based particle methods. A new approach from the original viewpoint of the momentum conservation regarding particle-level collisions, hereinafter refered to as time-scale correction of particle-level impulses (TCPI), is proposed to derive new source terms of pressure Poisson equation (PPE). This results in more stable computations with drastic reduction of unphysical pressure oscillations and more robust simulation with pressure magnitudes almost independent to time step. Moreover, compared to other strategies, no additional computational effort is required, its implementation is extremely simple, and the only numerical parameter is the propagation speed of the perturbations, of which the calibration is much more straightforward due to its physical meaning. Simulations were carried out using moving particle semi-implicit (MPS) method improved by the proposed approach. The comparisons of computed results with theoretical and experimental ones confirmed the effectiveness of the proposed approach.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
A fully Lagrangian DEM-MPS mesh-free model for ice-wave dynamics
Authors:
Rubens Augusto Amaro Junior,
Andrea Mellado-Cusicahua,
Ahmad Shakibaeinia,
Liang-Yee Cheng
Abstract:
This paper develops and evaluates a novel 3D fully-Lagrangian (particle-based) numerical model, based on the hybrid discrete element method (DEM) and moving particle semi-implicit (MPS) mesh-free techniques, for modeling the highly-dynamic ice-wave interactions. Both MPS and DEM belong to mesh-free Lagrangian (particle) techniques. The model considers ice-wave dynamics as a multiphase continuum-di…
▽ More
This paper develops and evaluates a novel 3D fully-Lagrangian (particle-based) numerical model, based on the hybrid discrete element method (DEM) and moving particle semi-implicit (MPS) mesh-free techniques, for modeling the highly-dynamic ice-wave interactions. Both MPS and DEM belong to mesh-free Lagrangian (particle) techniques. The model considers ice-wave dynamics as a multiphase continuum-discrete system. While the MPS solves the continuum equations of free-surface flow in a Lagrangian particle-based domain, the DEM uses a multi-sphere Hertzian contact dynamic model to simulate the ice floes motion and interaction. The hybrid model predicts the motion and collision of ice floes as well as their interaction with water, boundaries, and any obstacle in their way. Considering the mesh-free Lagrangian nature of both DEM and MPS, the developed model has an inherent ability to predict the free-drift (absence of internal stress) movements of the ice floes, e.g., sliding, rolling, colliding, and piling-up, in violent free-surface flow. A small-scale and challenging experiment based on dam-break flow over dry and wet beds with floating block floes, which mimics the characteristics of an idealized jam release, has been conducted to provide useful and comprehensive quality data for the validation of the proposed model, as well as other numerical models. Experimental and numerical results of the free-surface profile and the position of the blocks are compared. The results show the ability of the model to numerically reproduce and predict the complex three-dimensional dynamic behavior of wave-ice floes interaction. Overall, this study is a first effort toward developing an ice-wave dynamics within a fully Lagrangian framework, and its results can be extended to bring an in-depth understanding of the physics of the real-scale ice-wave or river ice dynamic problems in the future.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Dynamical dimensional reduction in multi-valued Hamiltonians
Authors:
Alexsandre L. Ferreira Junior,
Nelson Pinto-Neto,
Jorge Zanelli
Abstract:
Several interesting physical systems, such as the Lovelock extension of General Relativity in higher dimensions, classical time crystals, k-essence fields, Horndeski theories, compressible fluids, and nonlinear electrodynamics, have apparent ill defined sympletic structures, due to the fact that their Hamiltonians are multi-valued functions of the momenta. In this paper, the dynamical evolution ge…
▽ More
Several interesting physical systems, such as the Lovelock extension of General Relativity in higher dimensions, classical time crystals, k-essence fields, Horndeski theories, compressible fluids, and nonlinear electrodynamics, have apparent ill defined sympletic structures, due to the fact that their Hamiltonians are multi-valued functions of the momenta. In this paper, the dynamical evolution generated by such Hamiltonians is described as a degenerate dynamical system, whose sympletic form does not have a constant rank, allowing novel features and interpretations not present in previous investigations. In particular, it is shown how the multi-valuedness is associated with a dynamical mechanism of dimensional reduction, as some degrees of freedom turn into gauge symmetries when the system degenerates.
△ Less
Submitted 2 May, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
A Review of Deep Learning-based Approaches for Deepfake Content Detection
Authors:
Leandro A. Passos,
Danilo Jodas,
Kelton A. P. da Costa,
Luis A. Souza Júnior,
Douglas Rodrigues,
Javier Del Ser,
David Camacho,
João Paulo Papa
Abstract:
Recent advancements in deep learning generative models have raised concerns as they can create highly convincing counterfeit images and videos. This poses a threat to people's integrity and can lead to social instability. To address this issue, there is a pressing need to develop new computational models that can efficiently detect forged content and alert users to potential image and video manipu…
▽ More
Recent advancements in deep learning generative models have raised concerns as they can create highly convincing counterfeit images and videos. This poses a threat to people's integrity and can lead to social instability. To address this issue, there is a pressing need to develop new computational models that can efficiently detect forged content and alert users to potential image and video manipulations. This paper presents a comprehensive review of recent studies for deepfake content detection using deep learning-based approaches. We aim to broaden the state-of-the-art research by systematically reviewing the different categories of fake content detection. Furthermore, we report the advantages and drawbacks of the examined works, and prescribe several future directions towards the issues and shortcomings still unsolved on deepfake detection.
△ Less
Submitted 15 February, 2024; v1 submitted 12 February, 2022;
originally announced February 2022.
-
The CYGNO Experiment
Authors:
Fernando Domingues Amaro,
Elisabetta Baracchini,
Luigi Benussi,
Stefano Bianco,
Cesidio Capoccia,
Michele Caponero,
Danilo Santos Cardoso,
Gianluca Cavoto,
André Cortez,
Igor Abritta Costa,
Rita Joanna da Cruz Roque,
Emiliano Dané,
Giorgio Dho,
Flaminia Di Giambattista,
Emanuele Di Marco,
Giovanni Grilli di Cortona,
Giulia D'Imperio,
Francesco Iacoangeli,
Herman Pessoa Lima Júnior,
Guilherme Sebastiao Pinheiro Lopes,
Amaro da Silva Lopes Júnior,
Giovanni Maccarrone,
Rui Daniel Passos Mano,
Michela Marafini,
Robert Renz Marcelo Gregorio
, et al. (25 additional authors not shown)
Abstract:
The search for a novel technology able to detect and reconstruct nuclear and electron recoil events with the energy of a few keV has become more and more important now that large regions of high-mass dark matter (DM) candidates have been excluded. Moreover, a detector sensitive to incoming particle direction will be crucial in the case of DM discovery to open the possibility of studying its proper…
▽ More
The search for a novel technology able to detect and reconstruct nuclear and electron recoil events with the energy of a few keV has become more and more important now that large regions of high-mass dark matter (DM) candidates have been excluded. Moreover, a detector sensitive to incoming particle direction will be crucial in the case of DM discovery to open the possibility of studying its properties. Gaseous time projection chambers (TPC) with optical readout are very promising detectors combining the detailed event information provided by the TPC technique with the high sensitivity and granularity of latest-generation scientific light sensors. The CYGNO experiment (a CYGNus module with Optical readout) aims to exploit the optical readout approach of multiple-GEM structures in large volume TPCs for the study of rare events as interactions of low-mass DM or solar neutrinos. The combined use of high-granularity sCMOS cameras and fast light sensors allows the reconstruction of the 3D direction of the tracks, offering good energy resolution and very high sensitivity in the few keV energy range, together with a very good particle identification useful for distinguishing nuclear recoils from electronic recoils. This experiment is part of the CYGNUS proto-collaboration, which aims at constructing a network of underground observatories for directional DM search. A one cubic meter demonstrator is expected to be built in 2022/23 aiming at a larger scale apparatus (30 m$^3$--100 m$^3$) at a later stage.
△ Less
Submitted 11 February, 2022;
originally announced February 2022.
-
2D Modeling of HTS Coils with $T$-$A$ Formulation: How to Handle Different Coupling Scenarios
Authors:
Bárbara Maria Oliveira Santos,
Gabriel Dos Santos,
Frédéric Sirois,
Roberto Brambilla,
Rubens de Andrade Junior,
Felipe Sass,
Guilherme Goncalves Sotelo,
Francesco Grilli
Abstract:
Numerical models based on the finite-element method (FEM) are popular tools for investigating the macroscopic electromagnetic behavior of high-temperature superconductor (HTS) applications. This article explains how to use the $T$-$A$ formulation for modeling HTS coils in 2D with different coupling scenarios between the turns. First we consider a racetrack coil wound from one piece of superconduct…
▽ More
Numerical models based on the finite-element method (FEM) are popular tools for investigating the macroscopic electromagnetic behavior of high-temperature superconductor (HTS) applications. This article explains how to use the $T$-$A$ formulation for modeling HTS coils in 2D with different coupling scenarios between the turns. First we consider a racetrack coil wound from one piece of superconducting tape. Then we consider a coil obtained by winding a cable composed of different HTS tapes. In the latter case, the tape turns are either electrically connected along their entire length or just at the two ends of the coil: in the model, these two different types of electrical connection are implemented with the help of the electrical circuit module. The current density distributions and the AC losses of the coils in the different coupling scenarios are compared and discussed. The limits of applicability of the presented approach are pointed out. The model is developed for the straight section of racetrack coils, but can be easily adapted to axisymmetric geometries.
△ Less
Submitted 4 February, 2022;
originally announced February 2022.
-
Conjugations on the Hardy space $H^{2}$
Authors:
Marcos S. Ferreira,
Geraldo de A. Júnior
Abstract:
A conjugation $C$ on a separable complex Hilbert space $\mathcal H$ is an antilinear operator that is isometric and involutive. In this notes, we characterize all conjugations on the Hardy-Hilbert space $H^{2}$ over the disk. In addition, we characterize complex symmetric Toeplitz operators with a special type of these conjugations.
A conjugation $C$ on a separable complex Hilbert space $\mathcal H$ is an antilinear operator that is isometric and involutive. In this notes, we characterize all conjugations on the Hardy-Hilbert space $H^{2}$ over the disk. In addition, we characterize complex symmetric Toeplitz operators with a special type of these conjugations.
△ Less
Submitted 30 January, 2022;
originally announced January 2022.
-
YourTTS: Towards Zero-Shot Multi-Speaker TTS and Zero-Shot Voice Conversion for everyone
Authors:
Edresson Casanova,
Julian Weber,
Christopher Shulby,
Arnaldo Candido Junior,
Eren Gölge,
Moacir Antonelli Ponti
Abstract:
YourTTS brings the power of a multilingual approach to the task of zero-shot multi-speaker TTS. Our method builds upon the VITS model and adds several novel modifications for zero-shot multi-speaker and multilingual training. We achieved state-of-the-art (SOTA) results in zero-shot multi-speaker TTS and results comparable to SOTA in zero-shot voice conversion on the VCTK dataset. Additionally, our…
▽ More
YourTTS brings the power of a multilingual approach to the task of zero-shot multi-speaker TTS. Our method builds upon the VITS model and adds several novel modifications for zero-shot multi-speaker and multilingual training. We achieved state-of-the-art (SOTA) results in zero-shot multi-speaker TTS and results comparable to SOTA in zero-shot voice conversion on the VCTK dataset. Additionally, our approach achieves promising results in a target language with a single-speaker dataset, opening possibilities for zero-shot multi-speaker TTS and zero-shot voice conversion systems in low-resource languages. Finally, it is possible to fine-tune the YourTTS model with less than 1 minute of speech and achieve state-of-the-art results in voice similarity and with reasonable quality. This is important to allow synthesis for speakers with a very different voice or recording characteristics from those seen during training.
△ Less
Submitted 30 April, 2023; v1 submitted 4 December, 2021;
originally announced December 2021.
-
Panoptic Segmentation Meets Remote Sensing
Authors:
Osmar Luiz Ferreira de Carvalho,
Osmar Abílio de Carvalho Júnior,
Cristiano Rosa e Silva,
Anesmar Olino de Albuquerque,
Nickolas Castro Santana,
Dibio Leandro Borges,
Roberto Arnaldo Trancoso Gomes,
Renato Fontes Guimarães
Abstract:
Panoptic segmentation combines instance and semantic predictions, allowing the detection of "things" and "stuff" simultaneously. Effectively approaching panoptic segmentation in remotely sensed data can be auspicious in many challenging problems since it allows continuous mapping and specific target counting. Several difficulties have prevented the growth of this task in remote sensing: (a) most a…
▽ More
Panoptic segmentation combines instance and semantic predictions, allowing the detection of "things" and "stuff" simultaneously. Effectively approaching panoptic segmentation in remotely sensed data can be auspicious in many challenging problems since it allows continuous mapping and specific target counting. Several difficulties have prevented the growth of this task in remote sensing: (a) most algorithms are designed for traditional images, (b) image labelling must encompass "things" and "stuff" classes, and (c) the annotation format is complex. Thus, aiming to solve and increase the operability of panoptic segmentation in remote sensing, this study has five objectives: (1) create a novel data preparation pipeline for panoptic segmentation, (2) propose an annotation conversion software to generate panoptic annotations; (3) propose a novel dataset on urban areas, (4) modify the Detectron2 for the task, and (5) evaluate difficulties of this task in the urban setting. We used an aerial image with a 0,24-meter spatial resolution considering 14 classes. Our pipeline considers three image inputs, and the proposed software uses point shapefiles for creating samples in the COCO format. Our study generated 3,400 samples with 512x512 pixel dimensions. We used the Panoptic-FPN with two backbones (ResNet-50 and ResNet-101), and the model evaluation considered semantic instance and panoptic metrics. We obtained 93.9, 47.7, and 64.9 for the mean IoU, box AP, and PQ. Our study presents the first effective pipeline for panoptic segmentation and an extensive database for other researchers to use and deal with other data or related problems requiring a thorough scene understanding.
△ Less
Submitted 30 November, 2021; v1 submitted 23 November, 2021;
originally announced November 2021.
-
Bounding Box-Free Instance Segmentation Using Semi-Supervised Learning for Generating a City-Scale Vehicle Dataset
Authors:
Osmar Luiz Ferreira de Carvalho,
Osmar Abílio de Carvalho Júnior,
Anesmar Olino de Albuquerque,
Nickolas Castro Santana,
Dibio Leandro Borges,
Roberto Arnaldo Trancoso Gomes,
Renato Fontes Guimarães
Abstract:
Vehicle classification is a hot computer vision topic, with studies ranging from ground-view up to top-view imagery. In remote sensing, the usage of top-view images allows for understanding city patterns, vehicle concentration, traffic management, and others. However, there are some difficulties when aiming for pixel-wise classification: (a) most vehicle classification studies use object detection…
▽ More
Vehicle classification is a hot computer vision topic, with studies ranging from ground-view up to top-view imagery. In remote sensing, the usage of top-view images allows for understanding city patterns, vehicle concentration, traffic management, and others. However, there are some difficulties when aiming for pixel-wise classification: (a) most vehicle classification studies use object detection methods, and most publicly available datasets are designed for this task, (b) creating instance segmentation datasets is laborious, and (c) traditional instance segmentation methods underperform on this task since the objects are small. Thus, the present research objectives are: (1) propose a novel semi-supervised iterative learning approach using GIS software, (2) propose a box-free instance segmentation approach, and (3) provide a city-scale vehicle dataset. The iterative learning procedure considered: (1) label a small number of vehicles, (2) train on those samples, (3) use the model to classify the entire image, (4) convert the image prediction into a polygon shapefile, (5) correct some areas with errors and include them in the training data, and (6) repeat until results are satisfactory. To separate instances, we considered vehicle interior and vehicle borders, and the DL model was the U-net with the Efficient-net-B7 backbone. When removing the borders, the vehicle interior becomes isolated, allowing for unique object identification. To recover the deleted 1-pixel borders, we proposed a simple method to expand each prediction. The results show better pixel-wise metrics when compared to the Mask-RCNN (82% against 67% in IoU). On per-object analysis, the overall accuracy, precision, and recall were greater than 90%. This pipeline applies to any remote sensing target, being very efficient for segmentation and generating datasets.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Implications between Induction Principles for $\mathbb{N}$ in Peano Arithmetic
Authors:
João Alves Silva Júnior
Abstract:
In introductory books about natural numbers, a common kind of assertion - often left as exercise to the reader - is that certain forms of induction on $\mathbb{N}$ (regular/ordinary, complete/strong) are equivalent one to each other and to the well-ordering principle. This means that if P1 and P2 are two of these principles, then, under all the other usually adopted postulates for the set of natur…
▽ More
In introductory books about natural numbers, a common kind of assertion - often left as exercise to the reader - is that certain forms of induction on $\mathbb{N}$ (regular/ordinary, complete/strong) are equivalent one to each other and to the well-ordering principle. This means that if P1 and P2 are two of these principles, then, under all the other usually adopted postulates for the set of natural numbers (e.g., Peano axioms other than the induction axiom), P1 implies P2 and vice-versa. In this paper, we shows that, for a reasonable formalization, based on Peano arithmetic, some of the alleged implications between these principles hold only if an additional, independent condition is assumed, namely: every nonzero natural number is a successor. This condition is a consequence of the regular induction principle, but not of other induction principles. So, it is necessary to review all currently accepted implications between induction principles and similar statements in $\mathbb{N}$. From a list of 9 properties, usually considered induction principles (or equivalent to), we identify all valid and "almost valid" implications between them, as well as disprove all invalid implications by counterexamples, which consist of structures similar to Peano models, but not necessarily satisfying the Peano's induction axiom, and having an order relation adequately subordinated to the zero and the successors. Final remarks are made about what can and what cannot be proved if we weaken the assumptions about the order relation. The aim of this paper is to shed light on the need for more caution when alleging equivalence between induction principles for $\mathbb{N}$.
△ Less
Submitted 20 November, 2021;
originally announced November 2021.
-
Understanding mobility in networks: A node embedding approach
Authors:
Matheus F. C. Barros,
Carlos H. G. Ferreira,
Bruno Pereira dos Santos,
Lourenço A. P. Júnior,
Marco Mellia,
Jussara M. Almeida
Abstract:
Motivated by the growing number of mobile devices capable of connecting and exchanging messages, we propose a methodology aiming to model and analyze node mobility in networks. We note that many existing solutions in the literature rely on topological measurements calculated directly on the graph of node contacts, aiming to capture the notion of the node's importance in terms of connectivity and m…
▽ More
Motivated by the growing number of mobile devices capable of connecting and exchanging messages, we propose a methodology aiming to model and analyze node mobility in networks. We note that many existing solutions in the literature rely on topological measurements calculated directly on the graph of node contacts, aiming to capture the notion of the node's importance in terms of connectivity and mobility patterns beneficial for prototyping, design, and deployment of mobile networks. However, each measure has its specificity and fails to generalize the node importance notions that ultimately change over time. Unlike previous approaches, our methodology is based on a node embedding method that models and unveils the nodes' importance in mobility and connectivity patterns while preserving their spatial and temporal characteristics. We focus on a case study based on a trace of group meetings. The results show that our methodology provides a rich representation for extracting different mobility and connectivity patterns, which can be helpful for various applications and services in mobile networks.
△ Less
Submitted 11 November, 2021;
originally announced November 2021.
-
CORAA: a large corpus of spontaneous and prepared speech manually validated for speech recognition in Brazilian Portuguese
Authors:
Arnaldo Candido Junior,
Edresson Casanova,
Anderson Soares,
Frederico Santos de Oliveira,
Lucas Oliveira,
Ricardo Corso Fernandes Junior,
Daniel Peixoto Pinto da Silva,
Fernando Gorgulho Fayet,
Bruno Baldissera Carlotto,
Lucas Rafael Stefanel Gris,
Sandra Maria Aluísio
Abstract:
Automatic Speech recognition (ASR) is a complex and challenging task. In recent years, there have been significant advances in the area. In particular, for the Brazilian Portuguese (BP) language, there were about 376 hours public available for ASR task until the second half of 2020. With the release of new datasets in early 2021, this number increased to 574 hours. The existing resources, however,…
▽ More
Automatic Speech recognition (ASR) is a complex and challenging task. In recent years, there have been significant advances in the area. In particular, for the Brazilian Portuguese (BP) language, there were about 376 hours public available for ASR task until the second half of 2020. With the release of new datasets in early 2021, this number increased to 574 hours. The existing resources, however, are composed of audios containing only read and prepared speech. There is a lack of datasets including spontaneous speech, which are essential in different ASR applications. This paper presents CORAA (Corpus of Annotated Audios) v1. with 290.77 hours, a publicly available dataset for ASR in BP containing validated pairs (audio-transcription). CORAA also contains European Portuguese audios (4.69 hours). We also present a public ASR model based on Wav2Vec 2.0 XLSR-53 and fine-tuned over CORAA. Our model achieved a Word Error Rate of 24.18% on CORAA test set and 20.08% on Common Voice test set. When measuring the Character Error Rate, we obtained 11.02% and 6.34% for CORAA and Common Voice, respectively. CORAA corpora were assembled to both improve ASR models in BP with phenomena from spontaneous speech and motivate young researchers to start their studies on ASR for Portuguese. All the corpora are publicly available at https://github.com/nilc-nlp/CORAA under the CC BY-NC-ND 4.0 license.
△ Less
Submitted 18 November, 2021; v1 submitted 14 October, 2021;
originally announced October 2021.
-
Bridging the gap to real-world for network intrusion detection systems with data-centric approach
Authors:
Gustavo de Carvalho Bertoli,
Lourenço Alves Pereira Junior,
Filipe Alves Neto Verri,
Aldri Luiz dos Santos,
Osamu Saotome
Abstract:
Most research using machine learning (ML) for network intrusion detection systems (NIDS) uses well-established datasets such as KDD-CUP99, NSL-KDD, UNSW-NB15, and CICIDS-2017. In this context, the possibilities of machine learning techniques are explored, aiming for metrics improvements compared to the published baselines (model-centric approach). However, those datasets present some limitations a…
▽ More
Most research using machine learning (ML) for network intrusion detection systems (NIDS) uses well-established datasets such as KDD-CUP99, NSL-KDD, UNSW-NB15, and CICIDS-2017. In this context, the possibilities of machine learning techniques are explored, aiming for metrics improvements compared to the published baselines (model-centric approach). However, those datasets present some limitations as aging that make it unfeasible to transpose those ML-based solutions to real-world applications. This paper presents a systematic data-centric approach to address the current limitations of NIDS research, specifically the datasets. This approach generates NIDS datasets composed of the most recent network traffic and attacks, with the labeling process integrated by design.
△ Less
Submitted 8 January, 2022; v1 submitted 25 October, 2021;
originally announced October 2021.
-
Anisotropic motion of an electric dipole in a photon gas near a flat conducting boundary
Authors:
G. H. S. Camargo,
V. A. De Lorenci,
A. L. Ferreira Junior,
C. C. H. Ribeiro
Abstract:
The quantum Brownian motion of a single neutral particle with nonzero electric dipole moment placed in a photon gas at fixed temperature and close to a conducting wall is here examined. The interaction of the particle with the photon field leads to quantum dispersions of its linear and angular momenta, whose magnitudes depend on the temperature, distance to the wall, and also on the dipole moment…
▽ More
The quantum Brownian motion of a single neutral particle with nonzero electric dipole moment placed in a photon gas at fixed temperature and close to a conducting wall is here examined. The interaction of the particle with the photon field leads to quantum dispersions of its linear and angular momenta, whose magnitudes depend on the temperature, distance to the wall, and also on the dipole moment characteristics. It is shown that for typical experimental parameters the amount of energy held by the dipole rotation is expressively larger than the one related to the center of mass translation. Furthermore, the particle kinetic energy in presence of a thermal bath can decrease if the wall is added to the system, representing a novel quantum cooling effect where the work done by the quantum vacuum extracts energy from the particle. Finally, possible observable consequences are discussed.
△ Less
Submitted 22 June, 2023; v1 submitted 25 October, 2021;
originally announced October 2021.