-
Refractive index in the JUNO liquid scintillator
Authors:
H. S. Zhang,
M. Beretta,
S. Cialdi,
C. X. Yang,
J. H. Huang,
F. Ferraro,
G. F. Cao,
G. Reina,
Z. Y. Deng,
E. Suerra,
S. Altilia,
V. Antonelli,
D. Basilico,
A. Brigatti,
B. Caccianiga,
M. G. Giammarchi,
C. Landini,
P. Lombardi,
L. Miramonti,
E. Percalli,
G. Ranucci,
A. C. Re,
P. Saggese,
M. D. C. Torri,
S. Aiello
, et al. (51 additional authors not shown)
Abstract:
In the field of rare event physics, it is common to have huge masses of organic liquid scintillator as detection medium. In particular, they are widely used to study neutrino properties or astrophysical neutrinos. Thanks to its safety properties (such as low toxicity and high flash point) and easy scalability, linear alkyl benzene is the most common solvent used to produce liquid scintillators for…
▽ More
In the field of rare event physics, it is common to have huge masses of organic liquid scintillator as detection medium. In particular, they are widely used to study neutrino properties or astrophysical neutrinos. Thanks to its safety properties (such as low toxicity and high flash point) and easy scalability, linear alkyl benzene is the most common solvent used to produce liquid scintillators for large mass experiments. The knowledge of the refractive index is a pivotal point to understand the detector response, as this quantity (and its wavelength dependence) affects the Cherenkov radiation and photon propagation in the medium. In this paper, we report the measurement of the refractive index of the JUNO liquid scintillator between 260-1064 nm performed with two different methods (an ellipsometer and a refractometer), with a sub percent level precision. In addition, we used an interferometer to measure the group velocity in the JUNO liquid scintillator and verify the expected value derived from the refractive index measurements.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
A Tidy Framework and Infrastructure to Systematically Assemble Spatio-temporal Indexes from Multivariate Data
Authors:
H. Sherry Zhang,
Dianne Cook,
Ursula Laa,
Nicolas Langrené,
Patricia Menéndez
Abstract:
Indexes are useful for summarizing multivariate information into single metrics for monitoring, communicating, and decision-making. While most work has focused on defining new indexes for specific purposes, more attention needs to be directed towards making it possible to understand index behavior in different data conditions, and to determine how their structure affects their values and variation…
▽ More
Indexes are useful for summarizing multivariate information into single metrics for monitoring, communicating, and decision-making. While most work has focused on defining new indexes for specific purposes, more attention needs to be directed towards making it possible to understand index behavior in different data conditions, and to determine how their structure affects their values and variation in values. Here we discuss a modular data pipeline recommendation to assemble indexes. It is universally applicable to index computation and allows investigation of index behavior as part of the development procedure. One can compute indexes with different parameter choices, adjust steps in the index definition by adding, removing, and swapping them to experiment with various index designs, calculate uncertainty measures, and assess indexes robustness. The paper presents three examples to illustrate the pipeline framework usage: comparison of two different indexes designed to monitor the spatio-temporal distribution of drought in Queensland, Australia; the effect of dimension reduction choices on the Global Gender Gap Index (GGGI) on countries ranking; and how to calculate bootstrap confidence intervals for the Standardized Precipitation Index (SPI). The methods are supported by a new R package, called tidyindex.
△ Less
Submitted 13 May, 2024; v1 submitted 11 January, 2024;
originally announced January 2024.
-
cubble: An R Package for Organizing and Wrangling Multivariate Spatio-temporal Data
Authors:
H. Sherry Zhang,
Dianne Cook,
Ursula Laa,
Nicolas Langrené,
Patricia Menéndez
Abstract:
Multivariate spatio-temporal data refers to multiple measurements taken across space and time. For many analyses, spatial and time components can be separately studied: for example, to explore the temporal trend of one variable for a single spatial location, or to model the spatial distribution of one variable at a given time. However for some studies, it is important to analyse different aspects…
▽ More
Multivariate spatio-temporal data refers to multiple measurements taken across space and time. For many analyses, spatial and time components can be separately studied: for example, to explore the temporal trend of one variable for a single spatial location, or to model the spatial distribution of one variable at a given time. However for some studies, it is important to analyse different aspects of the spatio-temporal data simultaneouly, like for instance, temporal trends of multiple variables across locations. In order to facilitate the study of different portions or combinations of spatio-temporal data, we introduce a new data structure, cubble, with a suite of functions enabling easy slicing and dicing on the different components spatio-temporal components. The proposed cubble structure ensures that all the components of the data are easy to access and manipulate while providing flexibility for data analysis. In addition, cubble facilitates visual and numerical explorations of the data while easing data wrangling and modelling. The cubble structure and the functions provided in the cubble R package equip users with the capability to handle hierarchical spatial and temporal structures. The cubble structure and the tools implemented in the package are illustrated with different examples of Australian climate data.
△ Less
Submitted 10 January, 2024; v1 submitted 30 April, 2022;
originally announced May 2022.
-
A Review of the State-of-the-Art on Tours for Dynamic Visualization of High-dimensional Data
Authors:
Stuart Lee,
Dianne Cook,
Natalia da Silva,
Ursula Laa,
Earo Wang,
Nick Spyrison,
H. Sherry Zhang
Abstract:
This article discusses a high-dimensional visualization technique called the tour, which can be used to view data in more than three dimensions. We review the theory and history behind the technique, as well as modern software developments and applications of the tour that are being found across the sciences and machine learning.
This article discusses a high-dimensional visualization technique called the tour, which can be used to view data in more than three dimensions. We review the theory and history behind the technique, as well as modern software developments and applications of the tour that are being found across the sciences and machine learning.
△ Less
Submitted 19 April, 2021; v1 submitted 16 April, 2021;
originally announced April 2021.
-
Visual Diagnostics for Constrained Optimisation with Application to Guided Tours
Authors:
H. Sherry Zhang,
Dianne Cook,
Ursula Laa,
Nicolas Langrené,
Patricia Menéndez
Abstract:
A guided tour helps to visualise high-dimensional data by showing low-dimensional projections along a projection pursuit optimisation path. Projection pursuit is a generalisation of principal component analysis, in the sense that different indexes are used to define the interestingness of the projected data. While much work has been done in developing new indexes in the literature, less has been d…
▽ More
A guided tour helps to visualise high-dimensional data by showing low-dimensional projections along a projection pursuit optimisation path. Projection pursuit is a generalisation of principal component analysis, in the sense that different indexes are used to define the interestingness of the projected data. While much work has been done in developing new indexes in the literature, less has been done on understanding the optimisation. Index functions can be noisy, might have multiple local maxima as well as an optimal maximum, and are constrained to generate orthonormal projection frames, which complicates the optimization. In addition, projection pursuit is primarily used for exploratory data analysis, and finding the local maxima is also useful. The guided tour is especially useful for exploration, because it conducts geodesic interpolation connecting steps in the optimisation and shows how the projected data changes as a maxima is approached. This work provides new visual diagnostics for examining a choice of optimisation procedure, based on the provision of a new data object which collects information throughout the optimisation. It has helped to diagnose and fix several problems with projection pursuit guided tour. This work might be useful more broadly for diagnosing optimisers, and comparing their performance. The diagnostics are implemented in the R package, ferrn.
△ Less
Submitted 7 April, 2021;
originally announced April 2021.
-
A search for prompt gamma-ray counterparts to fast radio bursts in the Insight-HXMT data
Authors:
C. Guidorzi,
M. Marongiu,
R. Martone,
L. Nicastro,
S. L. Xiong,
J. Y. Liao,
G. Li,
S. N. Zhang,
L. Amati,
F. Frontera,
M. Orlandini,
P. Rosati,
E. Virgilli,
S. Zhang,
Q. C. Bu,
C. Cai,
X. L. Cao,
Z. Chang,
G. Chen,
L. Chen,
T. X. Chen,
Y. B. Chen,
Y. P. Chen,
W. Cui,
W. W. Cui
, et al. (98 additional authors not shown)
Abstract:
No robust detection of prompt electromagnetic counterparts to fast radio bursts (FRBs) has yet been obtained, in spite of several multi-wavelength searches carried out so far. Specifically, X/gamma-ray counterparts are predicted by some models. We planned on searching for prompt gamma-ray counterparts in the Insight-Hard X-ray Modulation Telescope (Insight-HXMT) data, taking advantage of the uniqu…
▽ More
No robust detection of prompt electromagnetic counterparts to fast radio bursts (FRBs) has yet been obtained, in spite of several multi-wavelength searches carried out so far. Specifically, X/gamma-ray counterparts are predicted by some models. We planned on searching for prompt gamma-ray counterparts in the Insight-Hard X-ray Modulation Telescope (Insight-HXMT) data, taking advantage of the unique combination of large effective area in the keV-MeV energy range and of sub-ms time resolution. We selected 39 FRBs that were promptly visible from the High-Energy (HE) instrument aboard Insight-HXMT. After calculating the expected arrival times at the location of the spacecraft, we searched for a significant excess in both individual and cumulative time profiles over a wide range of time resolutions, from several seconds down to sub-ms scales. Using the dispersion measures in excess of the Galactic terms, we estimated the upper limits on the redshifts. No convincing signal was found and for each FRB we constrained the gamma-ray isotropic-equivalent luminosity and the released energy as a function of emission timescale. For the nearest FRB source, the periodic repeater FRB180916.J0158+65, we find $L_{γ,iso}<5.5\times 10^{47}$ erg/s over 1 s, whereas $L_{γ,iso}<10^{49}-10^{51}$ erg/s for the bulk of FRBs. The same values scale up by a factor of ~100 for a ms-long emission. Even on a timescale comparable with that of the radio pulse itself no keV-MeV emission is observed. A systematic association with either long or short GRBs is ruled out with high confidence, except for subluminous events, as is the case for core-collapse of massive stars (long) or binary neutron star mergers (short) viewed off axis. Only giant flares from extra-galactic magnetars at least ten times more energetic than Galactic siblings are ruled out for the nearest FRB.
△ Less
Submitted 24 March, 2020;
originally announced March 2020.
-
Face Attribute Invertion
Authors:
X G Tu,
Y Luo,
H S Zhang,
W J Ai,
Z Ma,
M Xie
Abstract:
Manipulating human facial images between two domains is an important and interesting problem. Most of the existing methods address this issue by applying two generators or one generator with extra conditional inputs. In this paper, we proposed a novel self-perception method based on GANs for automatical face attribute inverse. The proposed method takes face images as inputs and employs only one si…
▽ More
Manipulating human facial images between two domains is an important and interesting problem. Most of the existing methods address this issue by applying two generators or one generator with extra conditional inputs. In this paper, we proposed a novel self-perception method based on GANs for automatical face attribute inverse. The proposed method takes face images as inputs and employs only one single generator without being conditioned on other inputs. Profiting from the multi-loss strategy and modified U-net structure, our model is quite stable in training and capable of preserving finer details of the original face images.
△ Less
Submitted 14 January, 2020;
originally announced January 2020.