Showing 1–50 of 64 results for author: Giordani, M

Optimizing Energy Efficiency of 5G RedCap Beam Management for Smart Agriculture Applications

Authors: Manishika Rawat, Matteo Pagin, Marco Giordani, Louis-Adrien Dufrene, Quentin Lampin, Michele Zorzi

Abstract: Beam management in 5G NR involves the transmission and reception of control signals such as Synchronization Signal Blocks (SSBs), crucial for tasks like initial access and/or channel estimation. However, this procedure consumes energy, which is particularly challenging to handle for battery-constrained nodes such as RedCap devices. Specifically, in this work we study a mid-market Internet of Thing… ▽ More Beam management in 5G NR involves the transmission and reception of control signals such as Synchronization Signal Blocks (SSBs), crucial for tasks like initial access and/or channel estimation. However, this procedure consumes energy, which is particularly challenging to handle for battery-constrained nodes such as RedCap devices. Specifically, in this work we study a mid-market Internet of Things (IoT) Smart Agriculture (SmA) deployment where an Unmanned Autonomous Vehicle (UAV) acts as a base station "from the sky" (UAV-gNB) to monitor and control ground User Equipments (UEs) in the field. Then, we formalize a multi-variate optimization problem to determine the optimal beam management design for RedCap SmA devices in order to reduce the energy consumption at the UAV-gNB. Specifically, we jointly optimize the transmission power and the beamwidth at the UAV-gNB. Based on the analysis, we derive the so-called "regions of feasibility," i.e., the upper limit(s) of the beam management parameters for which RedCap Quality of Service (QoS) and energy constraints are met. We study the impact of factors like the total transmission power at the gNB, the Signal-to-Noise Ratio (SNR) threshold for successful packet decoding, the number of UEs in the region, and the misdetection probability. Simulation results demonstrate that there exists an optimal configuration for beam management to promote energy efficiency, which depends on the speed of the UEs, the beamwidth, and other network parameters. △ Less

Submitted 24 April, 2024; originally announced April 2024.

Comments: This paper has been submitted to IEEE for publication. Copyright may change without notice

A Distributed Neural Linear Thompson Sampling Framework to Achieve URLLC in Industrial IoT

Authors: Francesco Pase, Marco Giordani, Sara Cavallero, Malte Schellmann, Josef Eichinger, Roberto Verdone, Michele Zorzi

Abstract: Industrial Internet of Things (IIoT) networks will provide Ultra-Reliable Low-Latency Communication (URLLC) to support critical processes underlying the production chains. However, standard protocols for allocating wireless resources may not optimize the latency-reliability trade-off, especially for uplink communication. For example, centralized grant-based scheduling can ensure almost zero collis… ▽ More Industrial Internet of Things (IIoT) networks will provide Ultra-Reliable Low-Latency Communication (URLLC) to support critical processes underlying the production chains. However, standard protocols for allocating wireless resources may not optimize the latency-reliability trade-off, especially for uplink communication. For example, centralized grant-based scheduling can ensure almost zero collisions, but introduces delays in the way resources are requested by the User Equipments (UEs) and granted by the gNB. In turn, distributed scheduling (e.g., based on random access), in which UEs autonomously choose the resources for transmission, may lead to potentially many collisions especially when the traffic increases. In this work we propose DIStributed combinatorial NEural linear Thompson Sampling (DISNETS), a novel scheduling framework that combines the best of the two worlds. By leveraging a feedback signal from the gNB and reinforcement learning, the UEs are trained to autonomously optimize their uplink transmissions by selecting the available resources to minimize the number of collisions, without additional message exchange to/from the gNB. DISNETS is a distributed, multi-agent adaptation of the Neural Linear Thompson Sampling (NLTS) algorithm, which has been further extended to admit multiple parallel actions. We demonstrate the superior performance of DISNETS in addressing URLLC in IIoT scenarios compared to other baselines. △ Less

Submitted 21 November, 2023; originally announced January 2024.

On the Energy Consumption of UAV Edge Computing in Non-Terrestrial Networks

Authors: Alessandro Traspadini, Marco Giordani, Giovanni Giambene, Tomaso De Cola, Michele Zorzi

Abstract: During the last few years, the use of Unmanned Aerial Vehicles (UAVs) equipped with sensors and cameras has emerged as a cutting-edge technology to provide services such as surveillance, infrastructure inspections, and target acquisition. However, this approach requires UAVs to process data onboard, mainly for person/object detection and recognition, which may pose significant energy constraints a… ▽ More During the last few years, the use of Unmanned Aerial Vehicles (UAVs) equipped with sensors and cameras has emerged as a cutting-edge technology to provide services such as surveillance, infrastructure inspections, and target acquisition. However, this approach requires UAVs to process data onboard, mainly for person/object detection and recognition, which may pose significant energy constraints as UAVs are battery-powered. A possible solution can be the support of Non-Terrestrial Networks (NTNs) for edge computing. In particular, UAVs can partially offload data (e.g., video acquisitions from onboard sensors) to more powerful upstream High Altitude Platforms (HAPs) or satellites acting as edge computing servers to increase the battery autonomy compared to local processing, even though at the expense of some data transmission delays. Accordingly, in this study we model the energy consumption of UAVs, HAPs, and satellites considering the energy for data processing, offloading, and hovering. Then, we investigate whether data offloading can improve the system performance. Simulations demonstrate that edge computing can improve both UAV autonomy and end-to-end delay compared to onboard processing in many configurations. △ Less

Submitted 20 December, 2023; originally announced December 2023.

Comments: 7 pages, 5 figures, 1 table. This paper has been accepted for presentation at the 57th Asilomar Conference on Signals, Systems, and Computers. Copyright IEEE 2023. Please cite it as: A. Traspadini, M. Giordani, G. Giambene, T. De Cola, and M. Zorzi, "On the Energy Consumption of UAV Edge Computing in Non-Terrestrial Networks," 57th Asilomar Conference on Signals, Systems, and Computers, 2023

Preliminary Performance Evaluation of a Satellite-to-HAP Communication Link

Authors: Giovanni Grieco, Giovanni Iacovelli, Mattia Sandri, Marco Giordani, Michele Zorzi, Luigi Alfredo Grieco

Abstract: The emergence of Fifth-Generation (5G) communication networks has brought forth unprecedented connectivity with ultra-low latency, high data rates, and pervasive coverage. However, meeting the increasing demands of applications for seamless and high-quality communication, especially in rural areas, requires exploring innovative solutions that expand 5G beyond traditional terrestrial networks. With… ▽ More The emergence of Fifth-Generation (5G) communication networks has brought forth unprecedented connectivity with ultra-low latency, high data rates, and pervasive coverage. However, meeting the increasing demands of applications for seamless and high-quality communication, especially in rural areas, requires exploring innovative solutions that expand 5G beyond traditional terrestrial networks. Within the context of Non-Terrestrial Networks (NTNs), two promising technologies with vast potential are High Altitude Platforms (HAPs) and satellites. The combination of these two platforms is able to provide wide coverage and reliable communication in remote and inaccessible areas, and/or where terrestrial infrastructure is unavailable. This study evaluates the performance of the communication link between a Geostationary Equatorial Orbit (GEO) satellite and a HAP using the Internet of Drones Simulator (IoD-Sim), implemented in ns-3 and incorporating the 3GPP TR 38.811 channel model. The code base of IoD-Sim is extended to simulate HAPs, accounting for the Earths curvature in various geographic coordinate systems, and considering realistic mobility patterns. A simulation campaign is conducted to evaluate the GEO-to-HAP communication link in terms of Signal-to-Noise Ratio (SNR) in two different scenarios, considering the mobility of the HAP, and as a function of the frequency and the distance. △ Less

Submitted 2 October, 2023; originally announced October 2023.

Journal ref: European Wireless 2023; 28th European Wireless Conference, Rome, Italy, 2023

Minimizing Energy Consumption for 5G NR Beam Management for RedCap Devices

Authors: Manishika Rawat, Matteo Pagin, Marco Giordani, Louis-Adrien Dufrene, Quentin Lampin, Michele Zorzi

Abstract: In 5G New Radio (NR), beam management entails periodic and continuous transmission and reception of control signals in the form of synchronization signal blocks (SSBs), used to perform initial access and/or channel estimation. However, this procedure demands continuous energy consumption, which is particularly challenging to handle for low-cost, low-complexity, and battery-constrained devices, suc… ▽ More In 5G New Radio (NR), beam management entails periodic and continuous transmission and reception of control signals in the form of synchronization signal blocks (SSBs), used to perform initial access and/or channel estimation. However, this procedure demands continuous energy consumption, which is particularly challenging to handle for low-cost, low-complexity, and battery-constrained devices, such as RedCap devices to support mid-market Internet of Things (IoT) use cases. In this context, this work aims at reducing the energy consumption during beam management for RedCap devices, while ensuring that the desired Quality of Service (QoS) requirements are met. To do so, we formalize an optimization problem in an Indoor Factory (InF) scenario to select the best beam management parameters, including the beam update periodicity and the beamwidth, to minimize energy consumption based on users' distribution and their speed. The analysis yields the regions of feasibility, i.e., the upper limit(s) on the beam management parameters for RedCap devices, that we use to provide design guidelines accordingly. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Downlink Clustering-Based Scheduling of IRS-Assisted Communications With Reconfiguration Constraints

Authors: Alberto Rech, Matteo Pagin, Leonardo Badia, Stefano Tomasin, Marco Giordani, Jonathan Gambini, Michele Zorzi

Abstract: Intelligent reflecting surfaces (IRSs) are being widely investigated as a potential low-cost and energy-efficient alternative to active relays for improving coverage in next-generation cellular networks. However, technical constraints in the configuration of IRSs should be taken into account in the design of scheduling solutions and the assessment of their performance. To this end, we examine an I… ▽ More Intelligent reflecting surfaces (IRSs) are being widely investigated as a potential low-cost and energy-efficient alternative to active relays for improving coverage in next-generation cellular networks. However, technical constraints in the configuration of IRSs should be taken into account in the design of scheduling solutions and the assessment of their performance. To this end, we examine an IRS-assisted time division multiple access (TDMA) cellular network where the reconfiguration of the IRS incurs a communication cost; thus, we aim at limiting the number of reconfigurations over time. Along these lines, we propose a clustering-based heuristic scheduling scheme that maximizes the cell sum capacity, subject to a fixed number of reconfigurations within a TDMA frame. First, the best configuration of each user equipment (UE), in terms of joint beamforming and optimal IRS configuration, is determined using an iterative algorithm. Then, we propose different clustering techniques to divide the UEs into subsets sharing the same sub-optimal IRS configuration, derived through distance- and capacity-based algorithms. Finally, UEs within the same cluster are scheduled accordingly. We provide extensive numerical results for different propagation scenarios, IRS sizes, and phase shifters quantization constraints, showing the effectiveness of our approach in supporting multi-user IRS systems with practical constraints. △ Less

Submitted 12 February, 2024; v1 submitted 23 May, 2023; originally announced May 2023.

Comments: 13 pages, 12 figures, journal paper. arXiv admin note: text overlap with arXiv:2301.10738

Implementation of a Channel Model for Non-Terrestrial Networks in ns-3

Authors: Mattia Sandri, Matteo Pagin, Marco Giordani, Michele Zorzi

Abstract: While the 5th generation (5G) of mobile networks has landed in the commercial area, the research community is exploring new functionalities for 6th generation (6G) networks, for example non-terrestrial networks (NTNs) via space/air nodes such as Unmanned Aerial Vehicles (UAVs), High Altitute Platforms (HAPs) or satellites. Specifically, satellite-based communication offers new opportunities for fu… ▽ More While the 5th generation (5G) of mobile networks has landed in the commercial area, the research community is exploring new functionalities for 6th generation (6G) networks, for example non-terrestrial networks (NTNs) via space/air nodes such as Unmanned Aerial Vehicles (UAVs), High Altitute Platforms (HAPs) or satellites. Specifically, satellite-based communication offers new opportunities for future wireless applications, such as providing connectivity to remote or otherwise unconnected areas, complementing terrestrial networks to reduce connection downtime, as well as increasing traffic efficiency in hot spot areas. In this context, an accurate characterization of the NTN channel is the first step towards proper protocol design. Along these lines, this paper provides an ns-3 implementation of the 3rd Generation Partnership Project (3GPP) channel and antenna models for NTN described in Technical Report 38.811. In particular, we extend the ns-3 code base with new modules to implement the attenuation of the signal in air/space due to atmospheric gases and scintillation, and new mobility and fading models to account for the Geocentric Cartesian coordinate system of satellites. Finally, we validate the accuracy of our ns-3 module via simulations against 3GPP calibration results △ Less

Submitted 9 May, 2023; originally announced May 2023.

Comments: 7 pages, 4 figures, paper created for the 2023 Workshop on ns-3 (WNS3)

A New Scheduler for URLLC in 5G NR IIoT Networks with Spatio-Temporal Traffic Correlations

Authors: Sara Cavallero, Nicole Sarcone Grande, Francesco Pase, Marco Giordani, Joseph Eichinger, Roberto Verdone, Michele Zorzi

Abstract: This paper explores the issue of enabling Ultra-Reliable Low-Latency Communications (URLLC) in view of the spatio-temporal correlations that characterize real 5th generation (5G) Industrial Internet of Things (IIoT) networks. In this context, we consider a common Standalone Non-Public Network (SNPN) architecture as promoted by the 5G Alliance for Connected Industries and Automation (5G-ACIA), and… ▽ More This paper explores the issue of enabling Ultra-Reliable Low-Latency Communications (URLLC) in view of the spatio-temporal correlations that characterize real 5th generation (5G) Industrial Internet of Things (IIoT) networks. In this context, we consider a common Standalone Non-Public Network (SNPN) architecture as promoted by the 5G Alliance for Connected Industries and Automation (5G-ACIA), and propose a new variant of the 5G NR semi-persistent scheduler (SPS) to deal with uplink traffic correlations. A benchmark solution with a "smart" scheduler (SSPS) is compared with a more realistic adaptive approach (ASPS) that requires the scheduler to estimate some unknown network parameters. We demonstrate via simulations that the 1-ms latency requirement for URLLC is fulfilled in both solutions, at the expense of some complexity introduced in the management of the traffic. Finally, we provide numerical guidelines to dimension IIoT networks as a function of the use case, the number of machines in the factory, and considering both periodic and aperiodic traffic. △ Less

Submitted 24 February, 2023; originally announced February 2023.

Comments: This paper has been accepted for presentation at the 2023 IEEE International Conference on Communications (ICC)

Towards Decentralized Predictive Quality of Service in Next-Generation Vehicular Networks

Authors: Filippo Bragato, Tommaso Lotta, Gianmaria Ventura, Matteo Drago, Federico Mason, Marco Giordani, Michele Zorzi

Abstract: To ensure safety in teleoperated driving scenarios, communication between vehicles and remote drivers must satisfy strict latency and reliability requirements. In this context, Predictive Quality of Service (PQoS) was investigated as a tool to predict unanticipated degradation of the Quality of Service (QoS), and allow the network to react accordingly. In this work, we design a reinforcement learn… ▽ More To ensure safety in teleoperated driving scenarios, communication between vehicles and remote drivers must satisfy strict latency and reliability requirements. In this context, Predictive Quality of Service (PQoS) was investigated as a tool to predict unanticipated degradation of the Quality of Service (QoS), and allow the network to react accordingly. In this work, we design a reinforcement learning (RL) agent to implement PQoS in vehicular networks. To do so, based on data gathered at the Radio Access Network (RAN) and/or the end vehicles, as well as QoS predictions, our framework is able to identify the optimal level of compression to send automotive data under low latency and reliability constraints. We consider different learning schemes, including centralized, fully-distributed, and federated learning. We demonstrate via ns-3 simulations that, while centralized learning generally outperforms any other solution, decentralized learning, and especially federated learning, offers a good trade-off between convergence time and reliability, with positive implications in terms of privacy and complexity. △ Less

Submitted 22 February, 2023; originally announced February 2023.

Comments: This paper has been accepted for publication at IEEE Information Theory and Applications Workshop (ITA), 2023

On the Optimal Beamwidth of UAV-Assisted Networks Operating at Millimeter Waves

Authors: Manishika Rawat, Marco Giordani, Brejesh Lall, Abdelaali Chaoub, Michele Zorzi

Abstract: The millimeter-wave (mm-wave) bands enable very large antenna arrays that can generate narrow beams for beamforming and spatial multiplexing. However, directionality introduces beam misalignment and leads to reduced energy efficiency. Thus, employing the narrowest possible beam in a cell may not necessarily imply maximum coverage. The objective of this work is to determine the optimal sector beamw… ▽ More The millimeter-wave (mm-wave) bands enable very large antenna arrays that can generate narrow beams for beamforming and spatial multiplexing. However, directionality introduces beam misalignment and leads to reduced energy efficiency. Thus, employing the narrowest possible beam in a cell may not necessarily imply maximum coverage. The objective of this work is to determine the optimal sector beamwidth for a cellular architecture served by an unmanned aerial vehicle (UAV) acting as a base station (BS). The users in a cell are assumed to be distributed according to a Poisson Point Process (PPP) with a given user density. We consider hybrid beamforming at the UAV, such that multiple concurrent beams serve all the sectors simultaneously. An optimization problem is formulated to maximize the sum rate over a given area while limiting the total power available to each sector. We observe that, for a given transmit power, the optimal sector beamwidth increases as the user density in a cell decreases, and varies based on the height of the UAV. Thus, we provide guidelines towards the optimal beamforming configurations for users in rural areas. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: 7 pages, 7 figures

Downlink TDMA Scheduling for IRS-aided Communications with Block-Static Constraints

Authors: Alberto Rech, Matteo Pagin, Stefano Tomasin, Federico Moretto, Leonardo Badia, Marco Giordani, Jonathan Gambini, Michele Zorzi

Abstract: Intelligent reflecting surfaces (IRSs) are being studied as possible low-cost energy-efficient alternatives to active relays, with the goal of solving the coverage issues of millimeter wave (mmWave) and terahertz (THz) network deployments. In the literature, these surfaces are often studied by idealizing their characteristics. Notably, it is often assumed that IRSs can tune with arbitrary frequenc… ▽ More Intelligent reflecting surfaces (IRSs) are being studied as possible low-cost energy-efficient alternatives to active relays, with the goal of solving the coverage issues of millimeter wave (mmWave) and terahertz (THz) network deployments. In the literature, these surfaces are often studied by idealizing their characteristics. Notably, it is often assumed that IRSs can tune with arbitrary frequency the phase-shifts induced by their elements, thanks to a wire-like control channel to the next generation node base (gNB). Instead, in this work we investigate an IRS-aided time division multiple access (TDMA) cellular network, where the reconfiguration of the IRS may entail an energy or communication cost, and we aim at limiting the number of reconfigurations over time. We develop a clustering-based heuristic scheduling, which optimizes the system sum-rate subject to a given number of reconfigurations within the TDMA frame. To such end, we first cluster user equipments (UEs) with a similar optimal IRS configuration. Then, we compute an overall IRS cluster configuration, which can be thus kept constant while scheduling the whole UEs cluster. Numerical results show that our approach is effective in supporting IRSs-aided systems with practical constraints, achieving up to 85% of the throughput obtained by an ideal deployment, while providing a 50% reduction in the number of IRS reconfigurations. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Comments: 6 pages, 4 figures, submitted to WCNC 2023 Workshops

Real-Time HAP-Assisted Vehicular Edge Computing for Rural Areas

Authors: Alessandro Traspadini, Marco Giordani, Giovanni Giambene, Michele Zorzi

Abstract: Non-Terrestrial Networks (NTNs) are expected to be a key component of 6th generation (6G) networks to support broadband seamless Internet connectivity and expand the coverage even in rural and remote areas. In this context, High Altitude Platforms (HAPs) can act as edge servers to process computational tasks offloaded by energy-constrained terrestrial devices such as Internet of Things (IoT) senso… ▽ More Non-Terrestrial Networks (NTNs) are expected to be a key component of 6th generation (6G) networks to support broadband seamless Internet connectivity and expand the coverage even in rural and remote areas. In this context, High Altitude Platforms (HAPs) can act as edge servers to process computational tasks offloaded by energy-constrained terrestrial devices such as Internet of Things (IoT) sensors and ground vehicles (GVs). In this paper, we analyze the opportunity to support Vehicular Edge Computing (VEC) via HAP in a rural scenario where GVs can decide whether to process data onboard or offload them to a HAP. We characterize the system as a set of queues in which computational tasks arrive according to a Poisson arrival process. Then, we assess the optimal VEC offloading factor to maximize the probability of real-time service, given latency and computational capacity constraints. △ Less

Submitted 24 January, 2023; originally announced January 2023.

Comments: 6 pages, 2 figures. This paper has been accepted for publication at IEEE Wireless Communications Letters (WCL). Copyright IEEE 2023. Please cite it as: A. Traspadini, M. Giordani, G. Giambene and M. Zorzi, "Real-Time HAP-Assistes Vehicular Edge Computing for Rural Areas," in IEEE Wireless Communications Letters, doi: 10.1109/LWC.2023.3238851

On the Performance of Non-Terrestrial Networks to Support the Internet of Things

Authors: Dengke Wang, Alessandro Traspadini, Marco Giordani, Mohamed-Slim Alouini, Michele Zorzi

Abstract: The advent of the Internet of Things (IoT) era, where billions of devices and sensors are becoming more and more connected and ubiquitous, is putting a strain on traditional terrestrial networks, that may no longer be able to fulfill service requirements efficiently. This issue is further complicated in rural and remote areas with scarce and low-quality cellular coverage. To fill this gap, the res… ▽ More The advent of the Internet of Things (IoT) era, where billions of devices and sensors are becoming more and more connected and ubiquitous, is putting a strain on traditional terrestrial networks, that may no longer be able to fulfill service requirements efficiently. This issue is further complicated in rural and remote areas with scarce and low-quality cellular coverage. To fill this gap, the research community is focusing on non-terrestrial networks (NTNs), where Unmanned Aerial Vehicles (UAVs), High Altitude Platforms (HAPs) and satellites can serve as aerial/space gateways to aggregate, process, and relay the IoT traffic. In this paper we demonstrate this paradigm, and evaluate how common Low-Power Wide Area Network (LPWAN) technologies, designed and developed to operate for IoT systems, work in NTNs. We then formalize an optimization problem to decide whether and how IoT traffic can be offloaded to LEO satellites to reduce the burden on terrestrial gateways. △ Less

Submitted 3 December, 2022; originally announced December 2022.

Comments: 7 pages, 5 figures, 3 tables. This paper has been accepted for publication at the 56th Asilomar Conference on Signals, Systems, and Computers. Copyright IEEE 2022. Please cite it as: D. Wang, A. Traspadini, M. Giordani, M.-S. Alouini, and M. Zorzi, "On the Performance of Non-Terrestrial Networks to Support the Internet of Things," 56th Asilomar Conference on Signals, Systems, and Computers, 2022

Distributed Resource Allocation for URLLC in IIoT Scenarios: A Multi-Armed Bandit Approach

Authors: Francesco Pase, Marco Giordani, Giampaolo Cuozzo, Sara Cavallero, Joseph Eichinger, Roberto Verdone, Michele Zorzi

Abstract: This paper addresses the problem of enabling inter-machine Ultra-Reliable Low-Latency Communication (URLLC) in future 6G Industrial Internet of Things (IIoT) networks. As far as the Radio Access Network (RAN) is concerned, centralized pre-configured resource allocation requires scheduling grants to be disseminated to the User Equipments (UEs) before uplink transmissions, which is not efficient for… ▽ More This paper addresses the problem of enabling inter-machine Ultra-Reliable Low-Latency Communication (URLLC) in future 6G Industrial Internet of Things (IIoT) networks. As far as the Radio Access Network (RAN) is concerned, centralized pre-configured resource allocation requires scheduling grants to be disseminated to the User Equipments (UEs) before uplink transmissions, which is not efficient for URLLC, especially in case of flexible/unpredictable traffic. To alleviate this burden, we study a distributed, user-centric scheme based on machine learning in which UEs autonomously select their uplink radio resources without the need to wait for scheduling grants or preconfiguration of connections. Using simulation, we demonstrate that a Multi-Armed Bandit (MAB) approach represents a desirable solution to allocate resources with URLLC in mind in an IIoT environment, in case of both periodic and aperiodic traffic, even considering highly populated networks and aggressive traffic. △ Less

Submitted 22 November, 2022; originally announced November 2022.

Comments: 2022 IEEE Globecom Workshops (GC Wkshps): Future of Wireless Access and Sensing for Industrial IoT (FutureIIoT)

Autonomous Driving From the Sky: Design and End-to-End Performance Evaluation

Authors: Matteo Bordin, Marco Giordani, Michele Polese, Tommaso Melodia, Michele Zorzi

Abstract: For autonomous vehicles to operate without human intervention, information sharing from local sensors plays a fundamental role. This can be challenging to handle with bandwidth-constrained communication systems, which calls for the adoption of new wireless technologies, like in the mmwave bands, to solve capacity issues. Another approach is to exploit uav, able to provide human users and their car… ▽ More For autonomous vehicles to operate without human intervention, information sharing from local sensors plays a fundamental role. This can be challenging to handle with bandwidth-constrained communication systems, which calls for the adoption of new wireless technologies, like in the mmwave bands, to solve capacity issues. Another approach is to exploit uav, able to provide human users and their cars with an aerial bird's-eye view of the scene otherwise unavailable, thus offering broader and more centralized observations. In this article we combine both aspects and design a novel framework in which uav, operating at mmwave, broadcast sensory information to the ground as a means to extend the (local) perception range of vehicles. To do so, we conduct a full-stack end-to-end simulation campaign with ns-3 considering real UAV data from the Stanford Drone Dataset, and study four scenarios representing different uav-to-ground communication strategies. Our results focus on the trade-off between centralized data processing in the sky vs. distributed local processing on the ground, with considerations related to the throughput, latency and reliability of the communication process. △ Less

Submitted 24 May, 2022; originally announced May 2022.

SELMA: SEmantic Large-scale Multimodal Acquisitions in Variable Weather, Daytime and Viewpoints

Authors: Paolo Testolina, Francesco Barbato, Umberto Michieli, Marco Giordani, Pietro Zanuttigh, Michele Zorzi

Abstract: Accurate scene understanding from multiple sensors mounted on cars is a key requirement for autonomous driving systems. Nowadays, this task is mainly performed through data-hungry deep learning techniques that need very large amounts of data to be trained. Due to the high cost of performing segmentation labeling, many synthetic datasets have been proposed. However, most of them miss the multi-sens… ▽ More Accurate scene understanding from multiple sensors mounted on cars is a key requirement for autonomous driving systems. Nowadays, this task is mainly performed through data-hungry deep learning techniques that need very large amounts of data to be trained. Due to the high cost of performing segmentation labeling, many synthetic datasets have been proposed. However, most of them miss the multi-sensor nature of the data, and do not capture the significant changes introduced by the variation of daytime and weather conditions. To fill these gaps, we introduce SELMA, a novel synthetic dataset for semantic segmentation that contains more than 30K unique waypoints acquired from 24 different sensors including RGB, depth, semantic cameras and LiDARs, in 27 different atmospheric and daytime conditions, for a total of more than 20M samples. SELMA is based on CARLA, an open-source simulator for generating synthetic data in autonomous driving scenarios, that we modified to increase the variability and the diversity in the scenes and class sets, and to align it with other benchmark datasets. As shown by the experimental evaluation, SELMA allows the efficient training of standard and multi-modal deep learning architectures, and achieves remarkable results on real-world data. SELMA is free and publicly available, thus supporting open science and research. △ Less

Submitted 20 April, 2022; originally announced April 2022.

Comments: 14 figures, 14 tables. This paper has been submitted to IEEE. Copyright may change without notice

Artificial Intelligence in Vehicular Wireless Networks: A Case Study Using ns-3

Authors: Matteo Drago, Tommaso Zugno, Federico Mason, Marco Giordani, Mate Boban, Michele Zorzi

Abstract: Artificial intelligence (AI) techniques have emerged as a powerful approach to make wireless networks more efficient and adaptable. In this paper we present an ns-3 simulation framework, able to implement AI algorithms for the optimization of wireless networks. Our pipeline consists of: (i) a new geometry-based mobility-dependent channel model for V2X; (ii) all the layers of a 5G-NR-compliant prot… ▽ More Artificial intelligence (AI) techniques have emerged as a powerful approach to make wireless networks more efficient and adaptable. In this paper we present an ns-3 simulation framework, able to implement AI algorithms for the optimization of wireless networks. Our pipeline consists of: (i) a new geometry-based mobility-dependent channel model for V2X; (ii) all the layers of a 5G-NR-compliant protocol stack, based on the ns3-mmwave module; (iii) a new application to simulate V2X data transmission, and (iv) a new intelligent entity for the control of the network via AI. Thanks to its flexible and modular design, researchers can use this tool to implement, train, and evaluate their own algorithms in a realistic and controlled environment. We test the behavior of our framework in a Predictive Quality of Service (PQoS) scenario, where AI functionalities are implemented using Reinforcement Learning (RL), and demonstrate that it promotes better network optimization compared to baseline solutions that do not implement AI. △ Less

Submitted 10 March, 2022; originally announced March 2022.

Comments: 8 pages, 4 figures, submitted to WNS3 2022

End-to-End Simulation of 5G Networks Assisted by IRS and AF Relays

Authors: Matteo Pagin, Marco Giordani, Amir Ashtari Gargari, Alberto Rech, Federico Moretto, Stefano Tomasin, Jonathan Gambini, Michele Zorzi

Abstract: The high propagation and penetration loss experienced at millimeter wave (mmWave) frequencies requires ultra-dense deployments of 5th generation (5G) base stations, which may be infeasible and costly for network operators. Integrated Access and Backhaul (IAB) has been proposed to partially address this issue, even though raising concerns in terms of power consumption and scalability. Recently, the… ▽ More The high propagation and penetration loss experienced at millimeter wave (mmWave) frequencies requires ultra-dense deployments of 5th generation (5G) base stations, which may be infeasible and costly for network operators. Integrated Access and Backhaul (IAB) has been proposed to partially address this issue, even though raising concerns in terms of power consumption and scalability. Recently, the research community has been investigating Intelligent Reflective Surfaces (IRSs) and Amplify-and-Forward (AF) relays as more energy-efficient alternatives to solve coverage issues in 5G scenarios. Along these lines, this paper relies on a new simulation framework, based on ns-3, to simulate IRS/AF systems with a full-stack, end-to-end perspective, with considerations on to the impact of the channel model and the protocol stack of 5G NR networks. Our goal is to demonstrate whether these technologies can be used to relay 5G traffic requests and, if so, how to dimension IRS/AF nodes as a function of the number of end users. △ Less

Submitted 4 March, 2022; v1 submitted 2 March, 2022; originally announced March 2022.

Comments: Submitted to IEEE for possible publication. 8 pages, 7 figures

UAV/HAP-Assisted Vehicular Edge Computing in 6G: Where and What to Offload?

Authors: Alessandro Traspadini, Marco Giordani, Michele Zorzi

Abstract: In the context of 6th generation (6G) networks, vehicular edge computing (VEC) is emerging as a promising solution to let battery-powered ground vehicles with limited computing and storage resources offload processing tasks to more powerful devices. Given the dynamic vehicular environment, VEC systems need to be as flexible, intelligent, and adaptive as possible. To this aim, in this paper we stud… ▽ More In the context of 6th generation (6G) networks, vehicular edge computing (VEC) is emerging as a promising solution to let battery-powered ground vehicles with limited computing and storage resources offload processing tasks to more powerful devices. Given the dynamic vehicular environment, VEC systems need to be as flexible, intelligent, and adaptive as possible. To this aim, in this paper we study the opportunity to realize VEC via non-terrestrial networks (NTNs), where ground vehicles offload resource-hungry tasks to Unmanned Aerial Vehicles (UAVs), High Altitude Platforms (HAPs), or a combination of the two. We define an optimization problem in which tasks are modeled as a Poisson arrival process, and apply queuing theory to find the optimal offloading factor in the system. Numerical results show that aerial-assisted VEC is feasible even in dense networks, provided that high-capacity HAP/UAV platforms are available. △ Less

Submitted 22 February, 2022; originally announced February 2022.

Comments: 6 pages, 5 figures, 1 table. This paper has been submitted to IEEE for publication. Copyright may change without notice

A Reinforcement Learning Framework for PQoS in a Teleoperated Driving Scenario

Authors: Federico Mason, Matteo Drago, Tommaso Zugno, Marco Giordani, Mate Boban, Michele Zorzi

Abstract: In recent years, autonomous networks have been designed with Predictive Quality of Service (PQoS) in mind, as a means for applications operating in the industrial and/or automotive sectors to predict unanticipated Quality of Service (QoS) changes and react accordingly. In this context, Reinforcement Learning (RL) has come out as a promising approach to perform accurate predictions, and optimize th… ▽ More In recent years, autonomous networks have been designed with Predictive Quality of Service (PQoS) in mind, as a means for applications operating in the industrial and/or automotive sectors to predict unanticipated Quality of Service (QoS) changes and react accordingly. In this context, Reinforcement Learning (RL) has come out as a promising approach to perform accurate predictions, and optimize the efficiency and adaptability of wireless networks. Along these lines, in this paper we propose the design of a new entity, implemented at the RAN-level that, with the support of an RL framework, implements PQoS functionalities. Specifically, we focus on the design of the reward function of the learning agent, able to convert QoS estimates into appropriate countermeasures if QoS requirements are not satisfied. We demonstrate via ns-3 simulations that our approach achieves the best trade-off in terms of QoS and Quality of Experience (QoE) performance of end users in a teleoperated-driving-like scenario, compared to other baseline solutions. △ Less

Submitted 3 February, 2022; originally announced February 2022.

Comments: 6 pages, 5 figures, 2 tables. The paper has been submitted to IEEE WCNC 2022. Copyright may change without notice

Point Cloud Compression for Efficient Data Broadcasting: A Performance Comparison

Authors: Francesco Nardo, Davide Peressoni, Paolo Testolina, Marco Giordani, Andrea Zanella

Abstract: The worldwide commercialization of fifth generation (5G) wireless networks and the exciting possibilities offered by connected and autonomous vehicles (CAVs) are pushing toward the deployment of heterogeneous sensors for tracking dynamic objects in the automotive environment. Among them, Light Detection and Ranging (LiDAR) sensors are witnessing a surge in popularity as their application to vehicu… ▽ More The worldwide commercialization of fifth generation (5G) wireless networks and the exciting possibilities offered by connected and autonomous vehicles (CAVs) are pushing toward the deployment of heterogeneous sensors for tracking dynamic objects in the automotive environment. Among them, Light Detection and Ranging (LiDAR) sensors are witnessing a surge in popularity as their application to vehicular networks seem particularly promising. LiDARs can indeed produce a three-dimensional (3D) mapping of the surrounding environment, which can be used for object detection, recognition, and topography. These data are encoded as a point cloud which, when transmitted, may pose significant challenges to the communication systems as it can easily congest the wireless channel. Along these lines, this paper investigates how to compress point clouds in a fast and efficient way. Both 2D- and a 3D-oriented approaches are considered, and the performance of the corresponding techniques is analyzed in terms of (de)compression time, efficiency, and quality of the decompressed frame compared to the original. We demonstrate that, thanks to the matrix form in which LiDAR frames are saved, compression methods that are typically applied for 2D images give equivalent results, if not better, than those specifically designed for 3D point clouds. △ Less

Submitted 1 February, 2022; originally announced February 2022.

Comments: 6 pages, 5 figures, 1 table. This paper has been accepted for presentation at IEEE Wireless Communications and Networking Conference (WCNC) 2022. Please cite it as: F. Nardo, D. Peressoni, P. Testolina, M. Giordani, and A. Zanella, "Point cloud compression for efficient data broadcasting: A performance comparison," IEEE Wireless Communications and Networking Conference (WCNC), Austin, USA, 2022

5G NR-Light at Millimeter Waves: Design Guidelines for Mid-Market IoT Use Cases

Authors: Matteo Pagin, Tommaso Zugno, Marco Giordani, Louis-Adrien Dufrene, Quentin Lampin, Michele Zorzi

Abstract: 5th generation (5G) systems have been designed with three main objectives in mind: increasing throughput, reducing latency, and enabling reliable communications. To meet these (often conflicting) constraints, the 3GPP released a set of specifications for 5G NR, one of the main innovations being the support for communications in the millimeter wave (mmWave) bands. However, how to implement lower co… ▽ More 5th generation (5G) systems have been designed with three main objectives in mind: increasing throughput, reducing latency, and enabling reliable communications. To meet these (often conflicting) constraints, the 3GPP released a set of specifications for 5G NR, one of the main innovations being the support for communications in the millimeter wave (mmWave) bands. However, how to implement lower complexity, energy efficient, mid-market Internet of Things (IoT) applications is still an on-going investigation, currently led by the 3GPP which is extending the NR standard with NR-Light specifications to support devices with reduced capabilities (REDCAP). While REDCAP devices may also operate at mmWaves to improve the network performance, hardware/software simplifications are needed to support balanced and mixed requirements compared to 5G NR systems. In this context, the contributions of this paper are threefold. First, we present some NR-Light use cases for which the support of the mmWave bands is desirable. Second, we describe how 5G NR can be simplified to achieve NR-Light requirements and expectations. Finally, we evaluate via simulation the performance of NR-Light devices operating at mmWaves in an industrial IoT setup, in terms of cost and complexity, throughput, and latency. △ Less

Submitted 9 January, 2023; v1 submitted 30 September, 2021; originally announced September 2021.

Comments: Changed title, revised article and submitted to a different venue

Predictive Quality of Service (PQoS): The Next Frontier for Fully Autonomous Systems

Authors: Mate Boban, Marco Giordani, Michele Zorzi

Abstract: Recent advances in software, hardware, computing and control have fueled significant progress in the field of autonomous systems. Notably, autonomous machines should continuously estimate how the scenario in which they move and operate will evolve within a predefined time frame, and foresee whether or not the network will be able to fulfill the agreed Quality of Service (QoS). If not, appropriate… ▽ More Recent advances in software, hardware, computing and control have fueled significant progress in the field of autonomous systems. Notably, autonomous machines should continuously estimate how the scenario in which they move and operate will evolve within a predefined time frame, and foresee whether or not the network will be able to fulfill the agreed Quality of Service (QoS). If not, appropriate countermeasures should be taken to satisfy the application requirements. Along these lines, in this paper we present possible methods to enable predictive QoS (PQoS) in autonomous systems, and discuss which use cases will particularly benefit from network prediction. Then, we shed light on the challenges in the field that are still open for future research. As a case study, we demonstrate whether machine learning can facilitate PQoS in a teleoperated-driving-like use case, as a function of different measurement signals. △ Less

Submitted 20 September, 2021; originally announced September 2021.

Comments: This paper has been accepted for publication in IEEE Network, 2021. 7 pages, 5 figures, 1 table

On the Role of Sensor Fusion for Object Detection in Future Vehicular Networks

Authors: Valentina Rossi, Paolo Testolina, Marco Giordani, Michele Zorzi

Abstract: Fully autonomous driving systems require fast detection and recognition of sensitive objects in the environment. In this context, intelligent vehicles should share their sensor data with computing platforms and/or other vehicles, to detect objects beyond their own sensors' fields of view. However, the resulting huge volumes of data to be exchanged can be challenging to handle for standard communic… ▽ More Fully autonomous driving systems require fast detection and recognition of sensitive objects in the environment. In this context, intelligent vehicles should share their sensor data with computing platforms and/or other vehicles, to detect objects beyond their own sensors' fields of view. However, the resulting huge volumes of data to be exchanged can be challenging to handle for standard communication technologies. In this paper, we evaluate how using a combination of different sensors affects the detection of the environment in which the vehicles move and operate. The final objective is to identify the optimal setup that would minimize the amount of data to be distributed over the channel, with negligible degradation in terms of object detection accuracy. To this aim, we extend an already available object detection algorithm so that it can consider, as an input, camera images, LiDAR point clouds, or a combination of the two, and compare the accuracy performance of the different approaches using two realistic datasets. Our results show that, although sensor fusion always achieves more accurate detections, LiDAR only inputs can obtain similar results for large objects while mitigating the burden on the channel. △ Less

Submitted 23 April, 2021; originally announced April 2021.

Comments: This paper has been accepted for presentation at the Joint European Conference on Networks and Communications & 6G Summit (EuCNC/6G Summit). 6 pages, 6 figures, 1 table

On the Convergence Time of Federated Learning Over Wireless Networks Under Imperfect CSI

Authors: Francesco Pase, Marco Giordani, Michele Zorzi

Abstract: Federated learning (FL) has recently emerged as an attractive decentralized solution for wireless networks to collaboratively train a shared model while keeping data localized. As a general approach, existing FL methods tend to assume perfect knowledge of the Channel State Information (CSI) during the training phase, which may not be easy to acquire in case of fast fading channels. Moreover, liter… ▽ More Federated learning (FL) has recently emerged as an attractive decentralized solution for wireless networks to collaboratively train a shared model while keeping data localized. As a general approach, existing FL methods tend to assume perfect knowledge of the Channel State Information (CSI) during the training phase, which may not be easy to acquire in case of fast fading channels. Moreover, literature analyses either consider a fixed number of clients participating in the training of the federated model, or simply assume that all clients operate at the maximum achievable rate to transmit model data. In this paper, we fill these gaps by proposing a training process that takes channel statistics as a bias to minimize the convergence time under imperfect CSI. Numerical experiments demonstrate that it is possible to reduce the training time by neglecting model updates from clients that cannot sustain a minimum predefined transmission rate. We also examine the trade-off between number of clients involved in the training process and model accuracy as a function of different fading regimes. △ Less

Submitted 1 April, 2021; originally announced April 2021.

Comments: IEEE International Conference on Communications Workshops (ICC WKSHPS), Virtual/Montreal, Canada, 2021

Hybrid Point Cloud Semantic Compression for Automotive Sensors: A Performance Evaluation

Authors: Andrea Varischio, Francesco Mandruzzato, Marcello Bullo, Marco Giordani, Paolo Testolina, Michele Zorzi

Abstract: In a fully autonomous driving framework, where vehicles operate without human intervention, information sharing plays a fundamental role. In this context, new network solutions have to be designed to handle the large volumes of data generated by the rich sensor suite of the cars in a reliable and efficient way. Among all the possible sensors, Light Detection and Ranging (LiDAR) can produce an accu… ▽ More In a fully autonomous driving framework, where vehicles operate without human intervention, information sharing plays a fundamental role. In this context, new network solutions have to be designed to handle the large volumes of data generated by the rich sensor suite of the cars in a reliable and efficient way. Among all the possible sensors, Light Detection and Ranging (LiDAR) can produce an accurate 3D point cloud representation of the surrounding environment, which in turn generates high data rates. For this reason, efficient point cloud compression is paramount to alleviate the burden of data transmission over bandwidth-constrained channels and to facilitate real-time communications. In this paper, we propose a pipeline to efficiently compress LiDAR observations in an automotive scenario. First, we leverage the capabilities of RangeNet++, a Deep Neural Network (DNN) used to semantically infer point labels, to reduce the channel load by selecting the most valuable environmental data to be disseminated. Second, we compress the selected points using Draco, a 3D compression algorithm which is able to obtain compression up to the quantization error. Our experiments, validated on the Semantic KITTI dataset, demonstrate that it is possible to compress and send the information at the frame rate of the LiDAR, thus achieving real-time performance. △ Less

Submitted 5 March, 2021; originally announced March 2021.

Comments: 6 pages, 8 figures

The Potential of Multilayered Hierarchical Nonterrestrial Networks for 6G: A Comparative Analysis Among Networking Architectures

Authors: Dengke Wang, Marco Giordani, Mohamed-Slim Alouini, Michele Zorzi

Abstract: 6th generation (6G) communication research is currently focusing on non-terrestrial networks (NTNs) to promote ubiquitous and ultra-high-capacity global connectivity. Specifically, multi-layered hierarchical networks, i.e., the orchestration among different aerial/space platforms, including Low and High Altitude Platforms (LAPs and HAPs), and satellites co-operating at different altitudes, current… ▽ More 6th generation (6G) communication research is currently focusing on non-terrestrial networks (NTNs) to promote ubiquitous and ultra-high-capacity global connectivity. Specifically, multi-layered hierarchical networks, i.e., the orchestration among different aerial/space platforms, including Low and High Altitude Platforms (LAPs and HAPs), and satellites co-operating at different altitudes, currently represent one the most attractive technological options to solve coverage and latency constraints associated with the NTN paradigm. However, there are still several issues to be resolved for proper network design. In this work, we evaluate the performance of different multi-layered non-terrestrial configurations, and provide guidelines on the optimal working point(s) for which it is possible to achieve a good compromise between improved system flexibility and network performance, with respect to a baseline standalone deployment. △ Less

Submitted 31 July, 2021; v1 submitted 17 November, 2020; originally announced November 2020.

Comments: 8 pages, 6 figures, 1 table. Accepted for publication in the IEEE Vehicular Technology Magazine

On the Beamforming Design of Millimeter Wave UAV Networks: Power vs. Capacity Trade-Offs

Authors: Yang Wang, Marco Giordani, Michele Zorzi

Abstract: The millimeter wave (mmWave) technology enables unmanned aerial vehicles (UAVs) to offer broadband high-speed wireless connectivity in fifth generation (5G) and beyond (6G) networks. However, the limited footprint of a single UAV implementing analog beamforming (ABF) requires multiple aerial stations to operate in swarms to provide ubiquitous network coverage, thereby posing serious constraints in… ▽ More The millimeter wave (mmWave) technology enables unmanned aerial vehicles (UAVs) to offer broadband high-speed wireless connectivity in fifth generation (5G) and beyond (6G) networks. However, the limited footprint of a single UAV implementing analog beamforming (ABF) requires multiple aerial stations to operate in swarms to provide ubiquitous network coverage, thereby posing serious constraints in terms of battery power consumption and swarm management. A possible remedy is to investigate the concept of hybrid beamforming (HBF) transceivers, which use a combination of analog beamformers as a solution to achieve higher flexibility in the beamforming design. This approach permits multiple ground users to be served simultaneously by the same UAV station, despite involving higher energy consumption in the radio frequency (RF) domain than its ABF counterpart. This paper presents a tractable stochastic analysis to characterize the downlink ergodic capacity and power consumption of UAV mmWave networks in an urban scenario, focusing on the trade-off between ABF and HBF architectures. A multi-beam coverage model is derived as a function of several UAV-specific parameters, including the number of UAVs, the deployment altitude, the antenna configuration, and the beamforming design. Our results, validated by simulation, show that, while ABF achieves better ergodic capacity at high altitudes, an HBF configuration with multiple beams, despite the use of more power-hungry RF blocks, consumes less power all the time with limited capacity degradation. △ Less

Submitted 23 October, 2020; originally announced October 2020.

Comments: 14 pages, 11 figures, 2 tables. This paper has been submitted to IEEE for publication

QUIC-EST: A Transmission Scheme to Maximize VoI of Multi-Stream Correlated Data Flows

Authors: Federico Chiariotti, Anay Ajit Deshpande, Marco Giordani, Kostantinos Antonakoglou, Andrea Zanella, Toktam Mahmoodi

Abstract: New advanced applications, such as autonomous driving and haptic communication, require to transmit multi-sensory data and require low latency and high reliability. These applications include. Existing implementations for such services have mostly relied on ad hoc scheduling and send rate adaptation mechanisms, implemented directly by the application and running over UDP. In this work, we propose… ▽ More New advanced applications, such as autonomous driving and haptic communication, require to transmit multi-sensory data and require low latency and high reliability. These applications include. Existing implementations for such services have mostly relied on ad hoc scheduling and send rate adaptation mechanisms, implemented directly by the application and running over UDP. In this work, we propose a transmission scheme that relies on the features of the recently developed QUIC transport protocol, providing reliability where needed, and standardized congestion control, without compromising latency. Furthermore, we propose a scheduler for sensor data transmissions on the transport layer that can exploit the correlations over time and across sensors. This mechanism allows applications to maximize the Value of Information (VoI) of the transmitted data, as we demonstrate through simulations in two realistic application scenarios. △ Less

Submitted 8 October, 2020; originally announced October 2020.

Comments: 7 pages, 6 figures. Submitted for publication to the IEEE

6G for Bridging the Digital Divide: Wireless Connectivity to Remote Areas

Authors: Abdelaali Chaoub, Marco Giordani, Brejesh Lall, Vimal Bhatia, Adrian Kliks, Luciano Mendes, Khaled Rabie, Harri Saarnisaari, Amit Singhal, Nan Zhang, Sudhir Dixit, Michele Zorzi

Abstract: In telecommunications, network service accessibility as a requirement is closely related to equitably serving the population residing at locations that can most appropriately be described as remote. Remote connectivity, however, would have benefited from a more inclusive consideration in the existing generations of mobile communications. To remedy this, sustainability and its social impact are bei… ▽ More In telecommunications, network service accessibility as a requirement is closely related to equitably serving the population residing at locations that can most appropriately be described as remote. Remote connectivity, however, would have benefited from a more inclusive consideration in the existing generations of mobile communications. To remedy this, sustainability and its social impact are being positioned as key drivers of sixth generation's (6G) research and standardization activities. In particular, there has been a conscious attempt to understand the demands of remote wireless connectivity, which has led to a better understanding of the challenges that lie ahead. In this perspective, this article overviews the key challenges associated with constraints on network design and deployment to be addressed for providing broadband connectivity to rural areas, and proposes novel approaches and solutions for bridging the digital divide in those regions. △ Less

Submitted 26 April, 2021; v1 submitted 9 September, 2020; originally announced September 2020.

Comments: This paper has been accepted for publication in IEEE Wireless Communications. 9 pages, 5 figures, 1 table

Accuracy vs. Complexity for mmWave Ray-Tracing: A Full Stack Perspective

Authors: Mattia Lecci, Paolo Testolina, Michele Polese, Marco Giordani, Michele Zorzi

Abstract: The millimeter wave (mmWave) band will provide multi-gigabits-per-second connectivity in the radio access of future wireless systems. The high propagation loss in this portion of the spectrum calls for the deployment of large antenna arrays to compensate for the loss through high directional gain, thus introducing a spatial dimension in the channel model to accurately represent the performance of… ▽ More The millimeter wave (mmWave) band will provide multi-gigabits-per-second connectivity in the radio access of future wireless systems. The high propagation loss in this portion of the spectrum calls for the deployment of large antenna arrays to compensate for the loss through high directional gain, thus introducing a spatial dimension in the channel model to accurately represent the performance of a mmWave network. In this perspective, ray-tracing can characterize the channel in terms of Multi Path Components (MPCs) to provide a highly accurate model, at the price of extreme computational complexity (e.g., for processing detailed environment information about the propagation), which limits the scalability of the simulations. In this paper, we present possible simplifications to improve the trade-off between accuracy and complexity in ray-tracing simulations at mmWaves by reducing the total number of MPCs. The effect of such simplifications is evaluated from a full-stack perspective through end-to-end simulations, testing different configuration parameters, propagation scenarios, and higher-layer protocol implementations. We then provide guidelines on the optimal degree of simplification, for which it is possible to reduce the complexity of simulations with a minimal reduction in accuracy for different deployment scenarios. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Comments: 31 pages, 14 figures, 1 table. This paper has been submitted to IEEE for publication. Copyright IEEE 2020. Please cite it as: Mattia Lecci, Paolo Testolina, Michele Polese, Marco Giordani, Michele Zorzi, "Accuracy vs. Complexity for mmWave Ray-Tracing: A Full Stack Perspective.''

NR V2X Communications at Millimeter Waves: An End-to-End Performance Evaluation

Authors: Tommaso Zugno, Matteo Drago, Marco Giordani, Michele Polese, Michele Zorzi

Abstract: 3GPP NR V2X represents the new 3GPP standard for next-generation vehicular systems which, among other innovations, supports vehicle-to-vehicle (V2V) operations in the millimeter wave (mmWave) spectrum to address the communication requirements of future intelligent automotive networks. While mmWaves will enable massive data rates and low latency, the propagation characteristics at very high frequen… ▽ More 3GPP NR V2X represents the new 3GPP standard for next-generation vehicular systems which, among other innovations, supports vehicle-to-vehicle (V2V) operations in the millimeter wave (mmWave) spectrum to address the communication requirements of future intelligent automotive networks. While mmWaves will enable massive data rates and low latency, the propagation characteristics at very high frequencies become very challenging, thereby calling for accurate performance evaluations as a means to properly assess the performance of such systems. Along these lines, in this paper MilliCar, the new ns-3 module based on the latest NR V2X specifications, is used to provide an end-to-end performance evaluation of mmWave V2V networks. We investigate the impact of different propagation scenarios and system parameters, including the inter-vehicle distance, the adopted frame numerology, and the modulation and coding scheme, and provide guidelines towards the most promising V2V deployment configurations. △ Less

Submitted 20 May, 2020; originally announced May 2020.

Comments: 6 pages, 7 figures. Submitted to IEEE Globecom 2020

A 6G White Paper on Connectivity for Remote Areas

Authors: Harri Saarnisaari, Sudhir Dixit, Mohamed-Slim Alouini, Abdelaali Chaoub, Marco Giordani, Adrian Kliks, Marja Matinmikko-Blue, Nan Zhang, Anuj Agrawal, Mats Andersson, Vimal Bhatia, Wei Cao, Yunfei Chen, Wei Feng, Marjo Heikkilä, Josep M. Jornet, Luciano Mendes, Heikki Karvonen, Brejesh Lall, Matti Latva-aho, Xiangling Li, Kalle Lähetkangas, Moshe T. Masonta, Alok Pandey, Pekka Pirinen , et al. (9 additional authors not shown)

Abstract: In many places all over the world rural and remote areas lack proper connectivity that has led to increasing digital divide. These areas might have low population density, low incomes, etc., making them less attractive places to invest and operate connectivity networks. 6G could be the first mobile radio generation truly aiming to close the digital divide. However, in order to do so, special requi… ▽ More In many places all over the world rural and remote areas lack proper connectivity that has led to increasing digital divide. These areas might have low population density, low incomes, etc., making them less attractive places to invest and operate connectivity networks. 6G could be the first mobile radio generation truly aiming to close the digital divide. However, in order to do so, special requirements and challenges have to be considered since the beginning of the design process. The aim of this white paper is to discuss requirements and challenges and point out related, identified research topics that have to be solved in 6G. This white paper first provides a generic discussion, shows some facts and discusses targets set in international bodies related to rural and remote connectivity and digital divide. Then the paper digs into technical details, i.e., into a solutions space. Each technical section ends with a discussion and then highlights identified 6G challenges and research ideas as a list. △ Less

Submitted 30 April, 2020; originally announced April 2020.

Comments: A 6G white paper, 17 pages

Coverage Analysis of UAVs in Millimeter Wave Networks: A Stochastic Geometry Approach

Authors: Matilde Boschiero, Marco Giordani, Michele Polese, Michele Zorzi

Abstract: Recent developments in robotics and communication technologies are paving the way towards the use of Unmanned Aerial Vehicles (UAVs) to provide ubiquitous connectivity in public safety scenarios or in remote areas. The millimeter wave (mmWave) spectrum, in particular, has gained momentum since the huge amount of free spectrum available at such frequencies can yield very high data rates. In the UAV… ▽ More Recent developments in robotics and communication technologies are paving the way towards the use of Unmanned Aerial Vehicles (UAVs) to provide ubiquitous connectivity in public safety scenarios or in remote areas. The millimeter wave (mmWave) spectrum, in particular, has gained momentum since the huge amount of free spectrum available at such frequencies can yield very high data rates. In the UAV context, however, mmWave operations may incur severe signal attenuation and sensitivity to blockage, especially considering the very long transmission distances involved. In this paper, we present a tractable stochastic analysis to characterize the coverage probability of UAV stations operating at mmWaves. We exemplify some of the trade-offs to be considered when designing solutions for millimeter wave (mmWave) scenarios, such as the beamforming configuration, and the UAV altitude and deployment. △ Less

Submitted 3 March, 2020; originally announced March 2020.

Comments: 7 pages, 3 figures, 2 tables. Submitted to IWCMC 2020

MilliCar -- An ns-3 Module for mmWave NR V2X Networks

Authors: Matteo Drago, Tommaso Zugno, Michele Polese, Marco Giordani, Michele Zorzi

Abstract: Vehicle-to-vehicle (V2V) communications have opened the way towards cooperative automated driving as a means to guarantee improved road safety and traffic efficiency. The use of the millimeter wave (mmWave) spectrum for V2V, in particular, holds great promise since the large bandwidth available offers the possibility of realizing high-data-rate connections. However, this potential is hindered by t… ▽ More Vehicle-to-vehicle (V2V) communications have opened the way towards cooperative automated driving as a means to guarantee improved road safety and traffic efficiency. The use of the millimeter wave (mmWave) spectrum for V2V, in particular, holds great promise since the large bandwidth available offers the possibility of realizing high-data-rate connections. However, this potential is hindered by the significant path and penetration loss experienced at these frequencies. It then becomes fundamental to practically evaluate the feasibility of installing mmWave-based technologies in the vehicular scenario, in view of the strict latency and throughput requirements of future automotive applications. To do so, in this paper we present MilliCar, the first ns-3 module for V2V mmWave networks, which features a detailed implementation of the sidelink Physical (PHY) and Medium Access Control (MAC) layers based on the latest NR V2X specifications, the 3GPP standard for next-generation vehicular systems. Our module is open-source and enables researchers to compare possible design options and their relative performance through an end-to-end full-stack approach, thereby stimulating further research on this topic. △ Less

Submitted 24 February, 2020; originally announced February 2020.

Comments: 8 pages, 5 figures. Submitted to WNS3 2020. The code related to this paper can be found at https://github.com/signetlabdei/millicar

Simplified Ray Tracing for the Millimeter Wave Channel: A Performance Evaluation

Authors: Mattia Lecci, Paolo Testolina, Marco Giordani, Michele Polese, Tanguy Ropitault, Camillo Gentile, Neeraj Varshney, Anuraag Bodi, Michele Zorzi

Abstract: Millimeter-wave (mmWave) communication is one of the cornerstone innovations of fifth-generation (5G) wireless networks, thanks to the massive bandwidth available in these frequency bands. To correctly assess the performance of such systems, however, it is essential to have reliable channel models, based on a deep understanding of the propagation characteristics of the mmWave signal. In this respe… ▽ More Millimeter-wave (mmWave) communication is one of the cornerstone innovations of fifth-generation (5G) wireless networks, thanks to the massive bandwidth available in these frequency bands. To correctly assess the performance of such systems, however, it is essential to have reliable channel models, based on a deep understanding of the propagation characteristics of the mmWave signal. In this respect, ray tracers can provide high accuracy, at the expense of a significant computational complexity, which limits the scalability of simulations. To address this issue, in this paper we present possible simplifications that can reduce the complexity of ray tracing in the mmWave environment, without significantly affecting the accuracy of the model. We evaluate the effect of such simplifications on link-level metrics, testing different configuration parameters and propagation scenarios. △ Less

Submitted 21 February, 2020; originally announced February 2020.

Comments: 6 pages, 6 figures, 1 table. This paper has been accepted for presentation at ITA 2020. (c) 2020 IEEE. Please cite it as: M. Lecci, P. Testolina, M. Giordani, M. Polese, T. Ropitault, C. Gentile, N. Varshney, A. Bodi, M. Zorzi, "Simplified Ray Tracing for the Millimeter Wave Channel: A Performance Evaluation," Information Theory and Applications Workshop (ITA), San Diego, US, 2020

Non-Terrestrial Networks in the 6G Era: Challenges and Opportunities

Authors: Marco Giordani, Michele Zorzi

Abstract: Many organizations recognize non-terrestrial networks (NTNs) as a key component to provide cost-effective and high-capacity connectivity in future 6th generation (6G) wireless networks. Despite this premise, there are still many questions to be answered for proper network design, including those associated to latency and coverage constraints. In this paper, after reviewing research activities on N… ▽ More Many organizations recognize non-terrestrial networks (NTNs) as a key component to provide cost-effective and high-capacity connectivity in future 6th generation (6G) wireless networks. Despite this premise, there are still many questions to be answered for proper network design, including those associated to latency and coverage constraints. In this paper, after reviewing research activities on NTNs, we present the characteristics and enabling technologies of NTNs in the 6G landscape and shed light on the challenges in the field that are still open for future research. As a case study, we evaluate the performance of an NTN scenario in which aerial/space vehicles use millimeter wave (mmWave) frequencies to provide access connectivity to on-the-ground mobile terminals as a function of different networking configurations. △ Less

Submitted 26 April, 2021; v1 submitted 21 December, 2019; originally announced December 2019.

Comments: The paper has been accepted for publication in IEEE Network Magazine. 8 pages, 4 figures, 2 tables

Scalable and Accurate Modeling of the Millimeter Wave Channel

Authors: Paolo Testolina, Mattia Lecci, Michele Polese, Marco Giordani, Michele Zorzi

Abstract: Communication at millimeter wave (mmWave) frequencies is one of the main novelties introduced in the 5th generation (5G) of cellular networks. The opportunities and challenges associated with such high frequencies have stimulated a number of studies that rely on simulation for the evaluation of the proposed solutions. The accuracy of simulations largely depends on that of the channel model, but po… ▽ More Communication at millimeter wave (mmWave) frequencies is one of the main novelties introduced in the 5th generation (5G) of cellular networks. The opportunities and challenges associated with such high frequencies have stimulated a number of studies that rely on simulation for the evaluation of the proposed solutions. The accuracy of simulations largely depends on that of the channel model, but popular channel models for mmWaves, such as the Spatial Channel Models (SCMs), have high computational complexity and limit the scalability of the scenarios. This paper profiles the implementation of a widely-used SCM model for mmWave frequencies, and proposes a simplified version of the 3GPP SCM that reduces the computation time by up to 12.5 times while providing essentially the same distributions of several metrics, such as the Signal-to-Interference-plus-Noise Ratio (SINR) in large scale scenarios. We also give insights on the use cases in which using a simplified model can still yield valid results. △ Less

Submitted 22 October, 2019; originally announced October 2019.

Comments: 6 pages, 7 figures. This paper has been accepted for presentation at IEEE ICNC 2020. Copyright IEEE 2020. Please cite it as Paolo Testolina, Mattia Lecci, Michele Polese, Marco Giordani, Michele Zorzi, Scalable and Accurate Modeling of the Millimeter Wave Channel, IEEE International Conference on Computing, Networking and Communications (ICNC), Big Island, HI, 2020

An Adaptive Broadcasting Strategy for Efficient Dynamic Mapping in Vehicular Networks

Authors: Federico Mason, Marco Giordani, Federico Chiariotti, Andrea Zanella, Michele Zorzi

Abstract: In this work, we face the issue of achieving an efficient dynamic mapping in vehicular networking scenarios, i.e., to obtain an accurate estimate of the positions and trajectories of connected vehicles in a certain area. State of the art solutions are based on the periodic broadcasting of the position information of the network nodes, with an inter-transmission period set by a congestion control s… ▽ More In this work, we face the issue of achieving an efficient dynamic mapping in vehicular networking scenarios, i.e., to obtain an accurate estimate of the positions and trajectories of connected vehicles in a certain area. State of the art solutions are based on the periodic broadcasting of the position information of the network nodes, with an inter-transmission period set by a congestion control scheme. However, the movements and maneuvers of vehicles can often be erratic, making transmitted data inaccurate or downright misleading. To address this problem, we propose to adopt a dynamic transmission scheme based on the actual positioning error, sending new data when the estimate passes a preset error threshold. Furthermore, the proposed method adapts the error threshold to the operational context according to a congestion control algorithm that limits the collision probability among broadcast packet transmissions. This threshold-based strategy can reduce the network load by avoiding the transmission of redundant messages, and is shown to improve the overall positioning accuracy by more than 20% in realistic urban scenarios. △ Less

Submitted 16 October, 2019; originally announced October 2019.

Towards Standardization of Millimeter Wave Vehicle-to-Vehicle Networks: Open Challenges and Performance Evaluation

Authors: Tommaso Zugno, Matteo Drago, Marco Giordani, Michele Polese, Michele Zorzi

Abstract: IEEE 802.11bd and 3GPP NR V2X represent the new specifications for next generation vehicular networks, exploiting new communication technologies and new spectrum, such as the millimeter wave (mmWave) band, to improve throughput and reduce latency. In this paper, we specifically focus on the challenges that mmWaves introduce for Vehicle-to-Vehicle (V2V) networking, by reviewing the latest standard… ▽ More IEEE 802.11bd and 3GPP NR V2X represent the new specifications for next generation vehicular networks, exploiting new communication technologies and new spectrum, such as the millimeter wave (mmWave) band, to improve throughput and reduce latency. In this paper, we specifically focus on the challenges that mmWaves introduce for Vehicle-to-Vehicle (V2V) networking, by reviewing the latest standard developments and the issues that 802.11bd and NR V2X will have to address for V2V operations at mmWaves. To the best of our knowledge, our work is the first that considers a full-stack, end-to-end approach for the design of mmWave V2V networks, discussing open issues that span from the physical to the higher layers, and reporting the results of an end-to-end performance evaluation that highlight the potential of mmWaves for V2V communications. △ Less

Submitted 15 May, 2020; v1 submitted 1 October, 2019; originally announced October 2019.

Comments: 7 pages, 4 figures, 1 table

Path Loss Models for V2V mmWave Communication: Performance Evaluation and Open Challenges

Authors: Marco Giordani, Takayuki Shimizu, Andrea Zanella, Takamasa Higuchi, Onur Altintas, Michele Zorzi

Abstract: Recently, millimeter wave (mmWave) bands have been investigated as a means to enhance automated driving and address the challenging data rate and latency demands of emerging automotive applications. For the development of those systems to operate in bands above 6 GHz, there is a need to have accurate channel models able to predict the peculiarities of the vehicular propagation at these bands, espe… ▽ More Recently, millimeter wave (mmWave) bands have been investigated as a means to enhance automated driving and address the challenging data rate and latency demands of emerging automotive applications. For the development of those systems to operate in bands above 6 GHz, there is a need to have accurate channel models able to predict the peculiarities of the vehicular propagation at these bands, especially as far as Vehicle-to-Vehicle (V2V) communications are concerned. In this paper, we validate the channel model that the 3GPP has proposed for NR-V2X systems, which (i) supports deployment scenarios for urban/highway propagation, and (ii) incorporates the effects of path loss, shadowing, line of sight probability, and static/dynamic blockage attenuation. We also exemplify the impact of several automotive-specific parameters on the overall network performance considering realistic system-level simulation assumptions for typical scenarios. Finally, we highlight potential inconsistencies of the model and provide recommendations for future measurement campaigns in vehicular environments. △ Less

Submitted 23 July, 2019; originally announced July 2019.

Comments: 5 pages, 3 figures, 4 tables. Accepted to the IEEE 2nd Connected and Automated Vehicles Symposium

Investigating Value of Information in Future Vehicular Communications

Authors: Marco Giordani, Andrea Zanella, Takamasa Higuchi, Onur Altintas, Michele Zorzi

Abstract: The next generations of vehicles are expected to be equipped with sophisticated sensors to support advanced automotive services. The large volume of data generated by such applications will likely put a strain on the vehicular communication technologies, which may be unable to guarantee the required quality of service. In this scenario, it is fundamental to assess the value of information (VoI) pr… ▽ More The next generations of vehicles are expected to be equipped with sophisticated sensors to support advanced automotive services. The large volume of data generated by such applications will likely put a strain on the vehicular communication technologies, which may be unable to guarantee the required quality of service. In this scenario, it is fundamental to assess the value of information (VoI) provided by each data source, to prioritize the transmissions that have greatest importance for the target applications. In this paper, we characterize VoI in future vehicular networks, and investigate efficient data dissemination methods to tackle capacity issues. Through a simulation study, we show how analytic hierarchy multicriteria decision processes can be exploited to determine the value of sensory observations as a function of space, time, and quality criteria. △ Less

Submitted 23 July, 2019; originally announced July 2019.

Comments: 5 pages, 3 figures, 2 tables. Accepted to the IEEE 2nd Connected and Automated Vehicles Symposium (CAVS)

Integrated Access and Backhaul in 5G mmWave Networks: Potentials and Challenges

Authors: Michele Polese, Marco Giordani, Tommaso Zugno, Arnab Roy, Sanjay Goyal, Douglas Castor, Michele Zorzi

Abstract: Integrated Access and Backhaul (IAB) is being investigated as a means to overcome deployment costs of ultra-dense 5G millimeter wave (mmWave) networks by realizing wireless backhaul links to relay the access traffic. For the development of these systems, however, it is fundamental to validate the performance of IAB in realistic scenarios through end-to-end system level simulations. In this paper,… ▽ More Integrated Access and Backhaul (IAB) is being investigated as a means to overcome deployment costs of ultra-dense 5G millimeter wave (mmWave) networks by realizing wireless backhaul links to relay the access traffic. For the development of these systems, however, it is fundamental to validate the performance of IAB in realistic scenarios through end-to-end system level simulations. In this paper, we shed light on the most recent standardization activities on IAB, and compare architectures with and without IAB in mmWave deployments. While it is well understood that IAB networks reduce deployment costs by obviating the need to provide wired backhaul to each cellular base-station, in this paper we demonstrate the cell-edge throughput advantage offered by IAB using end-to-end system level simulations. We further highlight some research challenges associated with this architecture that will require further investigations. △ Less

Submitted 3 June, 2019; originally announced June 2019.

Comments: Submitted to IEEE Communications Magazine, 7 pages, 4 figures

A Framework to Assess Value of Information in Future Vehicular Networks

Authors: Marco Giordani, Takamasa Higuchi, Andrea Zanella, Onur Altintas, Michele Zorzi

Abstract: Vehicles are becoming increasingly intelligent and connected, incorporating more and more sensors to support safer and more efficient driving. The large volume of data generated by such sensors, however, will likely saturate the capacity of vehicular communication technologies, making it challenging to guarantee the required quality of service. In this perspective, it is essential to assess the va… ▽ More Vehicles are becoming increasingly intelligent and connected, incorporating more and more sensors to support safer and more efficient driving. The large volume of data generated by such sensors, however, will likely saturate the capacity of vehicular communication technologies, making it challenging to guarantee the required quality of service. In this perspective, it is essential to assess the value of information (VoI) provided by each data source, to prioritize the transmissions that have the greatest importance for the target applications. In this paper, we propose and evaluate a framework that uses analytic hierarchy multicriteria decision processes to predict VoI based on space, time, and quality attributes. Our results shed light on the impact of the propagation scenario, the sensor resolution, the type of observation, and the communication distance on the value assessment performance. In particular, we show that VoI evolves at different rates as a function of the target application's characteristics. △ Less

Submitted 22 May, 2019; originally announced May 2019.

Comments: 6 pages, 6 figures, 2 tables, accepted for publication to the 2019 1st ACM Workshop on Technologies, mOdels, and Protocols for Cooperative Connected Cars (TOP-Cars)

An Efficient Requirement-Aware Attachment Policy for Future Millimeter Wave Vehicular Networks

Authors: Davide Peron, Marco Giordani, Michele Zorzi

Abstract: The automotive industry is rapidly evolving towards connected and autonomous vehicles, whose ever more stringent data traffic requirements might exceed the capacity of traditional technologies for vehicular networks. In this scenario, densely deploying millimeter wave (mmWave) base stations is a promising approach to provide very high transmission speeds to the vehicles. However, mmWave signals su… ▽ More The automotive industry is rapidly evolving towards connected and autonomous vehicles, whose ever more stringent data traffic requirements might exceed the capacity of traditional technologies for vehicular networks. In this scenario, densely deploying millimeter wave (mmWave) base stations is a promising approach to provide very high transmission speeds to the vehicles. However, mmWave signals suffer from high path and penetration losses which might render the communication unreliable and discontinuous. Coexistence between mmWave and Long Term Evolution (LTE) communication systems has therefore been considered to guarantee increased capacity and robustness through heterogeneous networking. Following this rationale, we face the challenge of designing fair and efficient attachment policies in heterogeneous vehicular networks. Traditional methods based on received signal quality criteria lack consideration of the vehicle's individual requirements and traffic demands, and lead to suboptimal resource allocation across the network. In this paper we propose a Quality-of-Service (QoS) aware attachment scheme which biases the cell selection as a function of the vehicular service requirements, preventing the overload of transmission links. Our simulations demonstrate that the proposed strategy significantly improves the percentage of vehicles satisfying application requirements and delivers efficient and fair association compared to state-of-the-art schemes. △ Less

Submitted 1 May, 2019; originally announced May 2019.

Comments: 8 pages, 8 figures, 2 tables, accepted to the 30th IEEE Intelligent Vehicles Symposium

Quality-Aware Broadcasting Strategies for Position Estimation in VANETs

Authors: Federico Mason, Marco Giordani, Federico Chiariotti, Andrea Zanella, Michele Zorzi

Abstract: The dissemination of vehicle position data all over the network is a fundamental task in Vehicular Ad Hoc Network (VANET) operations, as applications often need to know the position of other vehicles over a large area. In such cases, inter-vehicular communications should be exploited to satisfy application requirements, although congestion control mechanisms are required to minimize the packet col… ▽ More The dissemination of vehicle position data all over the network is a fundamental task in Vehicular Ad Hoc Network (VANET) operations, as applications often need to know the position of other vehicles over a large area. In such cases, inter-vehicular communications should be exploited to satisfy application requirements, although congestion control mechanisms are required to minimize the packet collision probability. In this work, we face the issue of achieving accurate vehicle position estimation and prediction in a VANET scenario. State of the art solutions to the problem try to broadcast the positioning information periodically, so that vehicles can ensure that the information their neighbors have about them is never older than the inter-transmission period. However, the rate of decay of the information is not deterministic in complex urban scenarios: the movements and maneuvers of vehicles can often be erratic and unpredictable, making old positioning information inaccurate or downright misleading. To address this problem, we propose to use the Quality of Information (QoI) as the decision factor for broadcasting. We implement a threshold-based strategy to distribute position information whenever the positioning error passes a reference value, thereby shifting the objective of the network to limiting the actual positioning error and guaranteeing quality across the VANET. The threshold-based strategy can reduce the network load by avoiding the transmission of redundant messages, as well as improving the overall positioning accuracy by more than 20% in realistic urban scenarios. △ Less

Submitted 8 April, 2019; originally announced April 2019.

Comments: 8 pages, 7 figures, 2 tables, accepted for presentation at European Wireless 2019

Towards 6G Networks: Use Cases and Technologies

Authors: Marco Giordani, Michele Polese, Marco Mezzavilla, Sundeep Rangan, Michele Zorzi

Abstract: Reliable data connectivity is vital for the ever increasingly intelligent, automated and ubiquitous digital world. Mobile networks are the data highways and, in a fully connected, intelligent digital world, will need to connect everything, from people to vehicles, sensors, data, cloud resources and even robotic agents. Fifth generation (5G) wireless networks (that are being currently deployed) off… ▽ More Reliable data connectivity is vital for the ever increasingly intelligent, automated and ubiquitous digital world. Mobile networks are the data highways and, in a fully connected, intelligent digital world, will need to connect everything, from people to vehicles, sensors, data, cloud resources and even robotic agents. Fifth generation (5G) wireless networks (that are being currently deployed) offer significant advances beyond LTE, but may be unable to meet the full connectivity demands of the future digital society. Therefore, this article discusses technologies that will evolve wireless networks towards a sixth generation (6G), and that we consider as enablers for several potential 6G use cases. We provide a full-stack, system-level perspective on 6G scenarios and requirements, and select 6G technologies that can satisfy them either by improving the 5G design, or by introducing completely new communication paradigms. △ Less

Submitted 4 February, 2020; v1 submitted 28 March, 2019; originally announced March 2019.

Comments: The paper has been accepted for publication at the IEEE Communications Magazine, 2020

LTE and Millimeter Waves for V2I Communications: an End-to-End Performance Comparison

Authors: Marco Giordani, Andrea Zanella, Michele Zorzi

Abstract: The Long Term Evolution (LTE) standard enables, besides cellular connectivity, basic automotive services to promote road safety through vehicle-to-infrastructure (V2I) communications. Nevertheless, stakeholders and research institutions, driven by the ambitious technological advances expected from fully autonomous and intelligent transportation systems, have recently investigated new radio technol… ▽ More The Long Term Evolution (LTE) standard enables, besides cellular connectivity, basic automotive services to promote road safety through vehicle-to-infrastructure (V2I) communications. Nevertheless, stakeholders and research institutions, driven by the ambitious technological advances expected from fully autonomous and intelligent transportation systems, have recently investigated new radio technologies as a means to support vehicular applications. In particular, the millimeter wave (mmWave) spectrum holds great promise because of the large available bandwidth that may provide the required link capacity. Communications at high frequencies, however, suffer from severe propagation and absorption loss, which may cause communication disconnections especially considering high mobility scenarios. It is therefore important to validate, through simulations, the actual feasibility of establishing V2I communications in the above-6 GHz bands. Following this rationale, in this paper we provide the first comparative end-to-end evaluation of the performance of the LTE and mmWave technologies in a vehicular scenario. The simulation framework includes detailed measurement-based channel models as well as the full details of MAC, RLC and transport protocols. Our results show that, although LTE still represents a promising access solution to guarantee robust and fair connections, mmWaves satisfy the foreseen extreme throughput demands of most emerging automotive applications. △ Less

Submitted 11 March, 2019; originally announced March 2019.

Comments: 7 pages, 5 figures, 2 tables. Accepted to VTC-Spring 2019, workshop on High Mobility Wireless Communications (HMWC)

End-to-End Simulation of Integrated Access and Backhaul at mmWaves

Authors: Michele Polese, Marco Giordani, Arnab Roy, Sanjay Goyal, Douglas Castor, Michele Zorzi

Abstract: Recently, the millimeter wave (mmWave) bands have been investigated as a means to support the foreseen extreme data rate demands of next-generation cellular networks (5G). However, in order to overcome the severe isotropic path loss and the harsh propagation experienced at such high frequencies, a dense base station deployment is required, which may be infeasible because of the unavailability of f… ▽ More Recently, the millimeter wave (mmWave) bands have been investigated as a means to support the foreseen extreme data rate demands of next-generation cellular networks (5G). However, in order to overcome the severe isotropic path loss and the harsh propagation experienced at such high frequencies, a dense base station deployment is required, which may be infeasible because of the unavailability of fiber drops to provide wired backhauling. To address this challenge, the 3GPP is investigating the concept of Integrated Access and Backhaul (IAB), i.e., the possibility of providing wireless backhaul to the mobile terminals. In this paper, we (i) extend the capabilities of the existing mmWave module for ns-3 to support advanced IAB functionalities, and (ii) evaluate the end-to-end performance of the IAB architecture through system-level full-stack simulations in terms of experienced throughput and communication latency. We finally provide guidelines on how to design optimal wireless backhaul solutions in the presence of resource-constrained and traffic-congested mmWave scenarios. △ Less

Submitted 1 August, 2018; originally announced August 2018.

Comments: 8 pages, 5 figures, 1 table. Accepted at IEEE CAMAD, September 2018, Barcelona, Spain

On the Feasibility of Integrating mmWave and IEEE 802.11p for V2V Communications

Authors: Marco Giordani, Andrea Zanella, Takamasa Higuchi, Onur Altintas, Michele Zorzi

Abstract: Recently, the millimeter wave (mmWave) band has been investigated as a means to support the foreseen extreme data rate demands of emerging automotive applications, which go beyond the capabilities of existing technologies for vehicular communications. However, this potential is hindered by the severe isotropic path loss and the harsh propagation of high-frequency channels. Moreover, mmWave signals… ▽ More Recently, the millimeter wave (mmWave) band has been investigated as a means to support the foreseen extreme data rate demands of emerging automotive applications, which go beyond the capabilities of existing technologies for vehicular communications. However, this potential is hindered by the severe isotropic path loss and the harsh propagation of high-frequency channels. Moreover, mmWave signals are typically directional, to benefit from beamforming gain, and require frequent realignment of the beams to maintain connectivity. These limitations are particularly challenging when considering vehicle-to-vehicle (V2V) transmissions, because of the highly mobile nature of the vehicular scenarios, and pose new challenges for proper vehicular communication design. In this paper, we conduct simulations to compare the performance of IEEE 802.11p and the mmWave technology to support V2V networking, aiming at providing insights on how both technologies can complement each other to meet the requirements of future automotive services. The results show that mmWave-based strategies support ultra-high transmission speeds, and IEEE 802.11p systems have the ability to guarantee reliable and robust communications. △ Less

Submitted 4 July, 2018; originally announced July 2018.

Comments: 7 pages, 5 figures, 2 tables, accepted to the IEEE Connected and Automated Vehicles Symposium (CAVS)