HANGERS/SET (H56)

1956-1959 Chevrolet 3100

Designed to work directly with our CalTracs bar kits. These hangers replace the original front hangar plates.

Includes (2) two hangers and hardware. Hangers will lower the truck approx. 2″ as most aftermarket hangers.

NOTE: Will not fit long bed models or 454SS without modification. Please call 661-728-9600 for information.

If you are unsure which part number will best fit your vehicle, please call Calvert Racing at 661-728-9600, Monday – Friday, 8:00am-4:30pm, PST.

$120.00

In Stock

Additional information

Weight 10 lbs
Dimensions 12 × 12 × 6 in

GO TO CART

Categories: ,
SKU: H56

Recently Viewed:

No recently viewed products to display

Related products

    Accessories

    U-Bolts, Square/set, 3″x9″ (SQ300x900)

    SET OF FOUR SQUARE U-BOLTS w/hardware

    3″ axle diameter x 9″ long, axle BELOW springs.

    Square U-bolts, Grade 5 material, zinc plated, 5/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.

    (SQ300x900 shown)

    (0 reviews)
    $60.00 Add to cart
    Accessories

    U-Bolts, Square/set, 2.3″x11.5″ (SQ250x1150)

    SET OF FOUR SQUARE U-BOLTS w/hardware

    2.5″ axle diameter x 11.5″ long, axle BELOW springs.

    Square U-bolts, Grade 5 material, zinc plated, 5/16″ diameter. Set includes 4 U-bolts, plates, nuts and washers.

    (SQ300x900 shown)

    (0 reviews)
    $60.00 Add to cart
    Accessories

    U-Bolts, Round/set, 3.5″x9″ (UR350x90)

    SET OF FOUR ROUND U-BOLTS w/hardware

    3.5″ axle diameter x 9″ long, axle ABOVE springs

    Round U-bolts, Grade 5 steel, rust resistant coating, 1/2″ diameter, Sets include 4 U-bolts, with nuts and washers.

    (UR225x70 shown)

    (0 reviews)
    $40.00 Add to cart
    Accessories

    HANGERS/SET (H1510)

    1999-2006 GM/Chevrolet 1500 series trucks (-2″ drop)

    Designed to work directly with CalTracs. These hangers replace the original front hangar plates.

    These front hangars are intended for use when aftermarket lowering hangars used to lower the truck will not allow the use of CalTracs on the spring. This product will lower the truck 2″ like most aftermarket hangars, but are designed to work directly with our CalTrac bar kits.

    Includes (2) two hangers and required hardware.

    NOTE: These will not fit long bed models or 454SS. without modification

    (0 reviews)
    $175.00 Add to cart